[U-Boot] [PATCH RESEND v2 3/3] arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig

[Ran Wang]

Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
---
Change in v2:
	None

 drivers/usb/host/Kconfig     |  6 ++++++
 include/configs/ls1012aqds.h | 11 -----------
 include/configs/ls1021aqds.h | 11 -----------
 include/configs/ls1021atwr.h | 20 --------------------
 4 files changed, 6 insertions(+), 42 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c79f866..90b2f78 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -186,6 +186,12 @@ config USB_EHCI_GENERIC
 	---help---
 	  Enables support for generic EHCI controller.
 
+config USB_EHCI_FSL
+	bool  "Support for FSL on-chip EHCI USB controller"
+	default n
+	select  CONFIG_EHCI_HCD_INIT_AFTER_RESET
+	---help---
+	  Enables support for the on-chip EHCI controller on FSL chips.
 endif # USB_EHCI_HCD
 
 config USB_OHCI_HCD
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index af5f37c..bf4262a 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -107,17 +107,6 @@
 #define CONFIG_SF_DEFAULT_BUS        1
 #define CONFIG_SF_DEFAULT_CS         0
 
-/*
-* USB
-*/
-/* EHCI Support - disbaled by default */
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 /*  MMC  */
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 6669f2f..d088e83 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -394,17 +394,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /*
- * USB
- */
-/* EHCI Support - disbaled by default */
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
-/*
  * Video
  */
 #ifdef CONFIG_VIDEO_FSL_DCU_FB
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3db7ef1..15d6638 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -24,26 +24,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
-/*
- * USB
- */
-
-/*
- * EHCI Support - disbaled by default as
- * there is no signal coming out of soc on
- * this board for this controller. However,
- * the silicon still has this controller,
- * and anyone can use this controller by
- * taking signals out on their board.
- */
-
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 
-- 
2.7.4