[U-Boot] [PATCH 0/3] ARM: omap3: evm: Add OF_CONTROL support

[Derald D. Woods]

On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote:
> This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
> additionally updates ethaddr setup with smc911x initialization.
> 
> Devicetree files are taken from Linux v4.15-rc3. Note that this is the
> first addition of OMAP34XX devicetree files.
> 
> Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
> 
> --- 8< -----------------------------------------------------------------
> U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
> Trying to boot from MMC1
> reading u-boot.img
> reading u-boot.img
> 
> 
> U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
> 
> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
> Model: TI OMAP35XX EVM (TMDSEVM3530)
> OMAP3 EVM board + LPDDR/NAND
> I2C:   ready
> DRAM:  256 MiB
> NAND:  256 MiB
> MMC:   OMAP SD/MMC: 0
> Read back SMSC id 0x92200000
> OMAP die ID: 265a002400000000040365fa1801b01f
> Net:   smc911x-0
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> Hit any key to stop autoboot:  0 
> OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
> serial at 4806a000
> serial at 4806a000
> serial at 4806a000
> --- 8< -----------------------------------------------------------------
> 
> 
> Derald D. Woods (3):
>   ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
>   ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
>   ARM: omap3: evm: Refactor 'board_eth_init'
> 
>  arch/arm/dts/Makefile                           |   4 +
>  arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
>  arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
>  arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
>  arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
>  arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
>  arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
>  arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
>  arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
>  arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
>  arch/arm/mach-omap2/omap3/Kconfig               |   4 +
>  board/ti/evm/evm.c                              |  24 +--
>  configs/omap3_evm_defconfig                     |   9 +-
>  include/configs/omap3_evm.h                     |   2 -
>  14 files changed, 896 insertions(+), 27 deletions(-)
>  create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
>  create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
>  create mode 100644 arch/arm/dts/omap3-evm.dts
>  create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
>  create mode 100644 arch/arm/dts/omap34xx.dtsi
> 
> -- 
> 2.15.1
> 

Ping. If there is any concern, please let me know and I will make
corrections. I plan to also update beagleboard and overo to use their
respective devicetree files. I would like to have these three OMAP34XX
boards, that I possess, to be near the same level of support. It will
help me to continue testing OMAP34XX stuff in general.

Derald