[U-Boot] [PATCH v10 16/27] mtd: spi-nor: Add m25p80 driver
Jagan Teki
jagan at amarulasolutions.com
Thu Dec 28 06:12:22 UTC 2017
This is MTD SPI-NOR driver for ST M25Pxx (and similar)
serial flash chips which is written as MTD_UCLASS.
Signed-off-by: Suneel Garapati <suneelglinux at gmail.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/mtd/spi-nor/Makefile | 3 +
drivers/mtd/spi-nor/m25p80.c | 250 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 253 insertions(+)
create mode 100644 drivers/mtd/spi-nor/m25p80.c
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 661f2f6..d578be0 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -7,3 +7,6 @@
ifdef CONFIG_MTD_SPI_NOR
obj-y += spi-nor.o spi-nor-uclass.o spi-nor-ids.o
endif
+
+## spi-nor to spi interface driver
+obj-$(CONFIG_MTD_M25P80) += m25p80.o
diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
new file mode 100644
index 0000000..5465921
--- /dev/null
+++ b/drivers/mtd/spi-nor/m25p80.c
@@ -0,0 +1,250 @@
+/*
+ * MTD SPI-NOR driver for ST M25Pxx (and similar) serial flash chips
+ *
+ * Copyright (C) 2016 Jagan Teki <jagan at openedev.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dma.h>
+#include <errno.h>
+#include <mtd.h>
+#include <spi.h>
+
+#include <dm/device-internal.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+
+#define MAX_CMD_SIZE 6
+
+struct m25p_platdata {
+ struct spi_nor spi_nor;
+};
+
+struct m25p_priv {
+ struct spi_slave *spi;
+ u8 command[MAX_CMD_SIZE];
+};
+
+static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
+{
+ /* opcode is in cmd[0] */
+ cmd[1] = addr >> (nor->addr_width * 8 - 8);
+ cmd[2] = addr >> (nor->addr_width * 8 - 16);
+ cmd[3] = addr >> (nor->addr_width * 8 - 24);
+}
+
+static int m25p_cmdsz(struct spi_nor *nor)
+{
+ return 1 + nor->addr_width;
+}
+
+static int m25p_read_reg(struct udevice *dev, u8 opcode, u8 *val, int len)
+{
+ struct m25p_priv *priv = dev_get_priv(dev);
+ struct spi_slave *spi = priv->spi;
+ int ret;
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("m25p: failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ ret = spi_write_then_read(spi, &opcode, 1, NULL, val, len);
+ if (ret < 0) {
+ debug("m25p: error %d reading register %x\n", ret, opcode);
+ return ret;
+ }
+
+ spi_release_bus(spi);
+ return ret;
+}
+
+static int m25p_write_reg(struct udevice *dev, u8 opcode, u8 *buf, int len)
+{
+ struct m25p_priv *priv = dev_get_priv(dev);
+ struct spi_slave *spi = priv->spi;
+ int ret;
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("m25p: failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ ret = spi_write_then_read(spi, &opcode, 1, buf, NULL, len);
+ if (ret < 0) {
+ debug("m25p: error %d writing register %x\n", ret, opcode);
+ return ret;
+ }
+
+ spi_release_bus(spi);
+ return ret;
+}
+
+/*
+ * TODO: remove the weak after all the other spi_flash_copy_mmap
+ * implementations removed from drivers
+ */
+void __weak flash_copy_mmap(void *data, void *offset, size_t len)
+{
+#ifdef CONFIG_DMA
+ if (!dma_memcpy(data, offset, len))
+ return;
+#endif
+ memcpy(data, offset, len);
+}
+
+static int m25p_read(struct udevice *dev, loff_t from, size_t len,
+ u_char *buf)
+{
+ struct m25p_priv *priv = dev_get_priv(dev);
+ struct spi_slave *spi = priv->spi;
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+ unsigned int dummy;
+ int ret;
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("m25p: failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ if (nor->memory_map) {
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP);
+ flash_copy_mmap(buf, nor->memory_map + from, len);
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
+ spi_release_bus(spi);
+ return 0;
+ }
+
+ /* convert the dummy cycles to the number of bytes */
+ dummy = nor->read_dummy;
+ dummy /= 8;
+
+ priv->command[0] = nor->read_opcode;
+ m25p_addr2cmd(nor, from, priv->command);
+
+ debug("m25p: (read) %2x %2x %2x %2x %2x (%llx)\n",
+ priv->command[0], priv->command[1], priv->command[2],
+ priv->command[3], priv->command[4], from);
+ ret = spi_write_then_read(spi, priv->command, m25p_cmdsz(nor) + dummy,
+ NULL, buf, len);
+ if (ret < 0) {
+ debug("m25p: error %d reading %x\n", ret, priv->command[0]);
+ return ret;
+ }
+
+ spi_release_bus(spi);
+ return ret;
+}
+
+static int m25p_write(struct udevice *dev, loff_t to, size_t len,
+ const u_char *buf)
+{
+ struct m25p_priv *priv = dev_get_priv(dev);
+ struct spi_slave *spi = priv->spi;
+ struct spi_nor *nor = spi_nor_get_spi_nor_dev(dev);
+ int cmd_sz, ret;
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("m25p: failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ cmd_sz = m25p_cmdsz(nor);
+ if ((nor->program_opcode == SNOR_OP_AAI_WP) && (buf != NULL))
+ cmd_sz = 1;
+
+ priv->command[0] = nor->program_opcode;
+ if (buf == NULL)
+ priv->command[0] = nor->erase_opcode;
+ m25p_addr2cmd(nor, to, priv->command);
+
+ debug("m25p: (%s) %2x %2x %2x %2x %2x (%llx)\n",
+ (buf == NULL) ? "erase" : "write", priv->command[0],
+ priv->command[1], priv->command[2], priv->command[3],
+ priv->command[4], to);
+ ret = spi_write_then_read(spi, priv->command, cmd_sz, buf, NULL, len);
+ if (ret < 0) {
+ debug("m25p: error %d writing %x\n", ret, priv->command[0]);
+ return ret;
+ }
+
+ spi_release_bus(spi);
+ return ret;
+}
+
+const struct spi_nor_ops m25p_ops = {
+ .read = m25p_read,
+ .write = m25p_write,
+ .read_reg = m25p_read_reg,
+ .write_reg = m25p_write_reg,
+};
+
+static int m25p_probe(struct udevice *dev)
+{
+ struct m25p_platdata *plat = dev_get_platdata(dev);
+ struct m25p_priv *priv = dev_get_priv(dev);
+ struct spi_nor_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct spi_slave *spi = dev_get_parent_priv(dev);
+ int ret;
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("m25p: failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ if (spi->mode & SPI_RX_SLOW)
+ plat->spi_nor.mode = SNOR_READ;
+ else if (spi->mode & SPI_RX_DUAL)
+ plat->spi_nor.mode = SNOR_READ_1_1_2;
+ else if (spi->mode & SPI_RX_QUAD)
+ plat->spi_nor.mode = SNOR_READ_1_1_4;
+
+ if (spi->mode & SPI_TX_BYTE)
+ plat->spi_nor.mode |= SNOR_WRITE_1_1_BYTE;
+ else if (spi->mode & SPI_TX_QUAD)
+ plat->spi_nor.mode |= SNOR_WRITE_1_1_4;
+
+ plat->spi_nor.memory_map = spi->memory_map;
+ plat->spi_nor.max_write_size = spi->max_write_size;
+
+ priv->spi = spi;
+ upriv->spi_nor = &plat->spi_nor;
+
+ return 0;
+}
+
+static int m25p_bind(struct udevice *dev)
+{
+ struct m25p_platdata *plat = dev_get_platdata(dev);
+
+ return spi_nor_bind(dev, &plat->spi_nor);
+}
+
+static const struct udevice_id m25p_ids[] = {
+ /*
+ * Generic compatibility for SPI NOR that can be identified by the
+ * JEDEC READ ID opcode (0x9F). Use this, if possible.
+ */
+ { .compatible = "jedec,spi-nor" },
+ { }
+};
+
+U_BOOT_DRIVER(m25p) = {
+ .name = "m25p",
+ .id = UCLASS_SPI_NOR,
+ .of_match = m25p_ids,
+ .ops = &m25p_ops,
+ .bind = m25p_bind,
+ .probe = m25p_probe,
+ .priv_auto_alloc_size = sizeof(struct m25p_priv),
+ .platdata_auto_alloc_size = sizeof(struct m25p_platdata),
+};
--
2.7.4
More information about the U-Boot
mailing list