[U-Boot] [PATCH v2 09/18] tools: kwbimage: Fix dest addr

[Stefan Roese]

On 11.01.2017 16:00, Mario Six wrote:
> To enable secure boot, we need to jump back into the BootROM to continue
> the SoC's boot process instead of letting the SPL load and run the main
> U-Boot image.
>
> But, since the u-boot-spl.img (including the 64 byte header) is loaded
> by the SoC as the main image, we need to compensate for the header
> length to get a correct entry point.
>
> Thus, we subtract the header size from the destination address, so that
> the execution address points at the actual entry point of the image.
>
> The current boards ignore both parameters anyway, so this change shouldn't
> concern them.
>
> Signed-off-by: Mario Six <mario.six at gdsys.cc>
> ---
> Changes in v2:
>
> None

Applied to u-boot-marvell/master

Thanks,
Stefan