[U-Boot] [PATCH v4 1/3] mmc: meson: update Meson GXBB / Odroid-C2 DT with latest Linux version

Heiner Kallweit hkallweit1 at gmail.com
Thu Feb 2 19:03:22 UTC 2017


As a prerequisite for adding a Meson GX MMC driver update the
Meson GXBB / Odroid-C2 device tree in Uboot with the latest
version from Linux.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Signed-off-by: Carlo Caione <carlo at endlessm.com>
Signed-off-by: Andreas Färber <afaerber at suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
v4:
- Added SoB of original authors
---
 arch/arm/dts/meson-gx.dtsi              | 447 ++++++++++++++++++++
 arch/arm/dts/meson-gxbb-odroidc2.dts    | 147 ++++++-
 arch/arm/dts/meson-gxbb.dtsi            | 718 ++++++++++++++++++++------------
 include/dt-bindings/clock/gxbb-aoclkc.h |  66 +++
 include/dt-bindings/clock/gxbb-clkc.h   |  34 ++
 include/dt-bindings/reset/gxbb-aoclkc.h |  66 +++
 6 files changed, 1203 insertions(+), 275 deletions(-)
 create mode 100644 arch/arm/dts/meson-gx.dtsi
 create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
 create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
 create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h

diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
new file mode 100644
index 0000000..c129100
--- /dev/null
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo at endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom at 0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon at 10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn at 14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac at 34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid at 46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks at 0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus at c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			reset: reset-controller at 4404 {
+				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
+			uart_A: serial at 84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_B: serial at 84dc {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84dc 0x0 0x14>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c at 8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm at 8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm at 8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm at 86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial at 8700 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x8700 0x0 0x14>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c at 87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c at 87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog at 98d0 {
+				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller at c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		sram: sram at c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem at 0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem at 200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		aobus: aobus at c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial at 4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_AO_B: serial at 4e0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004e0 0x0 0x14>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			ir: ir at 580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		periphs: periphs at c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+
+		hiubus: hiubus at c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			mailbox: mailbox at 404 {
+				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet at c9410000 {
+			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		apb: apb at d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc at 70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x2000>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc at 72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x2000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc at 74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x2000>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu at d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "vpu", "hhi", "dmc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port at 0 {
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
index 79bee64..c737183 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -64,6 +64,18 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		blue {
@@ -73,6 +85,60 @@
 			default-state = "off";
 		};
 	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&scpi_clocks {
+	status = "disabled";
 };
 
 &uart_AO {
@@ -83,6 +149,85 @@
 
 &ethmac {
 	status = "okay";
-	pinctrl-0 = <&eth_pins>;
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy at 0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
index e502c24..39a774a 100644
--- a/arch/arm/dts/meson-gxbb.dtsi
+++ b/arch/arm/dts/meson-gxbb.dtsi
@@ -40,307 +40,477 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "meson-gx.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
 
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
-
-		cpu0: cpu at 0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
+	soc {
+		usb0_phy: phy at c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
 		};
 
-		cpu1: cpu at 1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
+		usb1_phy: phy at c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
 		};
 
-		cpu2: cpu at 2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
+		usb0: usb at c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
 		};
 
-		cpu3: cpu at 3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
+		usb1: usb at c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
 		};
 	};
+};
 
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+&cbus {
+	spifc: spi at 8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
 	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl at 14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank at 14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
 
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+	clkc_AO: clock-controller at 040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x00040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
+	pwm_ab_AO: pwm at 550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x0550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
 	};
 
-	soc {
-		compatible = "simple-bus";
+	i2c_AO: i2c at 500 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x500 0x0 0x20>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_AO_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl at 4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		cbus: cbus at c1100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc1100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
-			reset: reset-controller at 4404 {
-				compatible = "amlogic,meson-gxbb-reset";
-				reg = <0x0 0x04404 0x0 0x20>;
-				#reset-cells = <1>;
-			};
-
-			uart_A: serial at 84c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-
-			uart_B: serial at 84dc {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-
-			uart_C: serial at 8700 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-		};
-
-		gic: interrupt-controller at c4301000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xc4301000 0 0x1000>,
-			      <0x0 0xc4302000 0 0x2000>,
-			      <0x0 0xc4304000 0 0x2000>,
-			      <0x0 0xc4306000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-		};
-
-		aobus: aobus at c8100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
-			pinctrl_aobus: pinctrl at 14 {
-				compatible = "amlogic,meson-gxbb-aobus-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio_ao: bank at 14 {
-					reg = <0x0 0x00014 0x0 0x8>,
-					      <0x0 0x0002c 0x0 0x4>,
-					      <0x0 0x00024 0x0 0x8>;
-					reg-names = "mux", "pull", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				uart_ao_a_pins: uart_ao_a {
-					mux {
-						groups = "uart_tx_ao_a", "uart_rx_ao_a";
-						function = "uart_ao";
-					};
-				};
-			};
-
-			uart_AO: serial at 4c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-		};
-
-		periphs: periphs at c8834000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8834000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
-
-			rng {
-				compatible = "amlogic,meson-rng";
-				reg = <0x0 0x0 0x0 0x4>;
-			};
-
-			pinctrl_periphs: pinctrl at 4b0 {
-				compatible = "amlogic,meson-gxbb-periphs-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio: bank at 4b0 {
-					reg = <0x0 0x004b0 0x0 0x28>,
-					      <0x0 0x004e8 0x0 0x14>,
-					      <0x0 0x00120 0x0 0x14>,
-					      <0x0 0x00430 0x0 0x40>;
-					reg-names = "mux", "pull", "pull-enable", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				emmc_pins: emmc {
-					mux {
-						groups = "emmc_nand_d07",
-						       "emmc_cmd",
-						       "emmc_clk";
-						function = "emmc";
-					};
-				};
-
-				sdcard_pins: sdcard {
-					mux {
-						groups = "sdcard_d0",
-						       "sdcard_d1",
-						       "sdcard_d2",
-						       "sdcard_d3",
-						       "sdcard_cmd",
-						       "sdcard_clk";
-						function = "sdcard";
-					};
-				};
-
-				uart_a_pins: uart_a {
-					mux {
-						groups = "uart_tx_a",
-						       "uart_rx_a";
-						function = "uart_a";
-					};
-				};
-
-				uart_b_pins: uart_b {
-					mux {
-						groups = "uart_tx_b",
-						       "uart_rx_b";
-						function = "uart_b";
-					};
-				};
-
-				uart_c_pins: uart_c {
-					mux {
-						groups = "uart_tx_c",
-						       "uart_rx_c";
-						function = "uart_c";
-					};
-				};
-
-				eth_pins: eth_c {
-					mux {
-						groups = "eth_mdio",
-						       "eth_mdc",
-						       "eth_clk_rx_clk",
-						       "eth_rx_dv",
-						       "eth_rxd0",
-						       "eth_rxd1",
-						       "eth_rxd2",
-						       "eth_rxd3",
-						       "eth_rgmii_tx_clk",
-						       "eth_tx_en",
-						       "eth_txd0",
-						       "eth_txd1",
-						       "eth_txd2",
-						       "eth_txd3";
-						function = "eth";
-					};
-				};
-			};
-		};
-
-		hiubus: hiubus at c883c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc883c000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
-
-			clkc: clock-controller at 0 {
-				compatible = "amlogic,gxbb-clkc";
-				#clock-cells = <1>;
-				reg = <0x0 0x0 0x0 0x3db>;
-			};
-		};
-
-		apb: apb at d0000000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xd0000000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
-		};
-
-		ethmac: ethernet at c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
-			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <0 8 1>;
-			interrupt-names = "macirq";
-			clocks = <&xtal>;
-			clock-names = "stmmaceth";
-			phy-mode = "rgmii";
-			status = "disabled";
+		gpio: bank at 4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk",
+				       "emmc_ds";
+				function = "emmc";
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
+			};
+		};
+
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
 		};
 	};
 };
+
+&hiubus {
+	clkc: clock-controller at 0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h
new file mode 100644
index 0000000..3175148
--- /dev/null
+++ b/include/dt-bindings/clock/gxbb-aoclkc.h
@@ -0,0 +1,66 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
+
+#define CLKID_AO_REMOTE		0
+#define CLKID_AO_I2C_MASTER	1
+#define CLKID_AO_I2C_SLAVE	2
+#define CLKID_AO_UART1		3
+#define CLKID_AO_UART2		4
+#define CLKID_AO_IR_BLASTER	5
+
+#endif
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
new file mode 100644
index 0000000..692846c
--- /dev/null
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -0,0 +1,34 @@
+/*
+ * GXBB clock tree IDs
+ */
+
+#ifndef __GXBB_CLKC_H
+#define __GXBB_CLKC_H
+
+#define CLKID_CPUCLK		1
+#define CLKID_HDMI_PLL		2
+#define CLKID_FCLK_DIV2		4
+#define CLKID_FCLK_DIV3		5
+#define CLKID_FCLK_DIV4		6
+#define CLKID_CLK81		12
+#define CLKID_MPLL2		15
+#define CLKID_SPI		34
+#define CLKID_I2C		22
+#define CLKID_SAR_ADC		23
+#define CLKID_ETH		36
+#define CLKID_USB0		50
+#define CLKID_USB1		51
+#define CLKID_USB		55
+#define CLKID_HDMI_PCLK		63
+#define CLKID_USB1_DDR_BRIDGE	64
+#define CLKID_USB0_DDR_BRIDGE	65
+#define CLKID_SANA		69
+#define CLKID_GCLK_VENCI_INT0	77
+#define CLKID_AO_I2C		93
+#define CLKID_SD_EMMC_A		94
+#define CLKID_SD_EMMC_B		95
+#define CLKID_SD_EMMC_C		96
+#define CLKID_SAR_ADC_CLK	97
+#define CLKID_SAR_ADC_SEL	98
+
+#endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/reset/gxbb-aoclkc.h b/include/dt-bindings/reset/gxbb-aoclkc.h
new file mode 100644
index 0000000..9e3fd60
--- /dev/null
+++ b/include/dt-bindings/reset/gxbb-aoclkc.h
@@ -0,0 +1,66 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
+
+#define RESET_AO_REMOTE		0
+#define RESET_AO_I2C_MASTER	1
+#define RESET_AO_I2C_SLAVE	2
+#define RESET_AO_UART1		3
+#define RESET_AO_UART2		4
+#define RESET_AO_IR_BLASTER	5
+
+#endif
-- 
2.11.0




More information about the U-Boot mailing list