[U-Boot] [PATCH 2/2] LS2080A: Move sec_init to board_init

[Udit Agarwal]

Moves sec_init to board_init rather than in misc_init function beacuse
PPA will be initialised in board_init function and for PPA validation
sec_init has to be done prior to PPA init.

Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
---
 board/freescale/ls2080aqds/ls2080aqds.c | 6 +++---
 board/freescale/ls2080ardb/ls2080ardb.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 73a61fd..d9d0bea 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -223,6 +223,9 @@ int board_init(void)
 #endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	rtc_enable_32khz_output();
+#ifdef CONFIG_FSL_CAAM
+        sec_init();
+#endif
 
 	return 0;
 }
@@ -264,9 +267,6 @@ int dram_init(void)
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
-#ifdef CONFIG_FSL_CAAM
-	sec_init();
-#endif
 	return 0;
 }
 #endif
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 02954ef..b0024d3 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -184,6 +184,9 @@ int board_init(void)
 	/* invert AQR405 IRQ pins polarity */
 	out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);
 #endif
+#ifdef CONFIG_FSL_CAAM
+        sec_init();
+#endif
 
 	return 0;
 }
@@ -237,9 +240,6 @@ int dram_init(void)
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
-#ifdef CONFIG_FSL_CAAM
-	sec_init();
-#endif
 	return 0;
 }
 #endif
-- 
1.9.1