[U-Boot] [PATCH v3 10/16] rockchip: rk3188: Add clock driver
Heiko Stuebner
heiko at sntech.de
Fri Feb 3 16:09:33 UTC 2017
Add a driver for setting up and modifying the various PLLs and peripheral
clocks on the RK3188.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/include/asm/arch-rockchip/cru_rk3188.h | 191 +++++++++
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk_rk3188.c | 523 ++++++++++++++++++++++++
3 files changed, 715 insertions(+)
create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3188.h
create mode 100644 drivers/clk/rockchip/clk_rk3188.c
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3188.h b/arch/arm/include/asm/arch-rockchip/cru_rk3188.h
new file mode 100644
index 0000000000..74f0fedcc6
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3188.h
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2016 Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_CRU_RK3188_H
+#define _ASM_ARCH_CRU_RK3188_H
+
+#define OSC_HZ (24 * 1000 * 1000)
+
+#define APLL_HZ (1608 * 1000000)
+#define GPLL_HZ (594 * 1000000)
+#define CPLL_HZ (384 * 1000000)
+
+/* The SRAM is clocked off aclk_cpu, so we want to max it out for boot speed */
+#define CPU_ACLK_HZ 297000000
+#define CPU_HCLK_HZ 148500000
+#define CPU_PCLK_HZ 74250000
+#define CPU_H2P_HZ 74250000
+
+#define PERI_ACLK_HZ 148500000
+#define PERI_HCLK_HZ 148500000
+#define PERI_PCLK_HZ 74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3188_clk_priv {
+ struct rk3188_grf *grf;
+ struct rk3188_cru *cru;
+ ulong rate;
+ bool has_bwadj;
+};
+
+struct rk3188_cru {
+ struct rk3188_pll {
+ u32 con0;
+ u32 con1;
+ u32 con2;
+ u32 con3;
+ } pll[4];
+ u32 cru_mode_con;
+ u32 cru_clksel_con[35];
+ u32 cru_clkgate_con[10];
+ u32 reserved1[2];
+ u32 cru_glb_srst_fst_value;
+ u32 cru_glb_srst_snd_value;
+ u32 reserved2[2];
+ u32 cru_softrst_con[9];
+ u32 cru_misc_con;
+ u32 reserved3[2];
+ u32 cru_glb_cnt_th;
+};
+check_member(rk3188_cru, cru_glb_cnt_th, 0x0140);
+
+/* CRU_CLKSEL0_CON */
+enum {
+ /* a9_core_div: core = core_src / (a9_core_div + 1) */
+ A9_CORE_DIV_SHIFT = 9,
+ A9_CORE_DIV_MASK = 0x1f,
+ CORE_PLL_SHIFT = 8,
+ CORE_PLL_MASK = 1,
+ CORE_PLL_SELECT_APLL = 0,
+ CORE_PLL_SELECT_GPLL,
+
+ /* core peri div: core:core_peri = 2:1, 4:1, 8:1 or 16:1 */
+ CORE_PERI_DIV_SHIFT = 6,
+ CORE_PERI_DIV_MASK = 3,
+
+ /* aclk_cpu pll selection */
+ CPU_ACLK_PLL_SHIFT = 5,
+ CPU_ACLK_PLL_MASK = 1,
+ CPU_ACLK_PLL_SELECT_APLL = 0,
+ CPU_ACLK_PLL_SELECT_GPLL,
+
+ /* a9_cpu_div: aclk_cpu = cpu_src / (a9_cpu_div + 1) */
+ A9_CPU_DIV_SHIFT = 0,
+ A9_CPU_DIV_MASK = 0x1f,
+};
+
+/* CRU_CLKSEL1_CON */
+enum {
+ /* ahb2apb_pclk_div: hclk_cpu:pclk_cpu = 1:1, 2:1 or 4:1 */
+ AHB2APB_DIV_SHIFT = 14,
+ AHB2APB_DIV_MASK = 3,
+
+ /* cpu_pclk_div: aclk_cpu:pclk_cpu = 1:1, 2:1, 4:1 or 8:1 */
+ CPU_PCLK_DIV_SHIFT = 12,
+ CPU_PCLK_DIV_MASK = 3,
+
+ /* cpu_hclk_div: aclk_cpu:hclk_cpu = 1:1, 2:1 or 4:1 */
+ CPU_HCLK_DIV_SHIFT = 8,
+ CPU_HCLK_DIV_MASK = 3,
+
+ /* core_aclk_div: cire:aclk_core = 1:1, 2:1, 3:1, 4:1 or 8:1 */
+ CORE_ACLK_DIV_SHIFT = 3,
+ CORE_ACLK_DIV_MASK = 7,
+};
+
+/* CRU_CLKSEL10_CON */
+enum {
+ PERI_SEL_PLL_MASK = 1,
+ PERI_SEL_PLL_SHIFT = 15,
+ PERI_SEL_CPLL = 0,
+ PERI_SEL_GPLL,
+
+ /* peri pclk div: aclk_bus:pclk_bus = 1:1, 2:1, 4:1 or 8:1 */
+ PERI_PCLK_DIV_SHIFT = 12,
+ PERI_PCLK_DIV_MASK = 3,
+
+ /* peripheral bus hclk div:aclk_bus: hclk_bus = 1:1, 2:1 or 4:1 */
+ PERI_HCLK_DIV_SHIFT = 8,
+ PERI_HCLK_DIV_MASK = 3,
+
+ /* peri aclk div: aclk_peri = periph_src / (peri_aclk_div + 1) */
+ PERI_ACLK_DIV_SHIFT = 0,
+ PERI_ACLK_DIV_MASK = 0x1f,
+};
+/* CRU_CLKSEL11_CON */
+enum {
+ HSICPHY_DIV_SHIFT = 8,
+ HSICPHY_DIV_MASK = 0x3f,
+
+ MMC0_DIV_SHIFT = 0,
+ MMC0_DIV_MASK = 0x3f,
+};
+
+/* CRU_CLKSEL12_CON */
+enum {
+ UART_PLL_SHIFT = 15,
+ UART_PLL_MASK = 1,
+ UART_PLL_SELECT_GENERAL = 0,
+ UART_PLL_SELECT_CODEC,
+
+ EMMC_DIV_SHIFT = 8,
+ EMMC_DIV_MASK = 0x3f,
+
+ SDIO_DIV_SHIFT = 0,
+ SDIO_DIV_MASK = 0x3f,
+};
+
+/* CRU_CLKSEL25_CON */
+enum {
+ SPI1_DIV_SHIFT = 8,
+ SPI1_DIV_MASK = 0x7f,
+
+ SPI0_DIV_SHIFT = 0,
+ SPI0_DIV_MASK = 0x7f,
+};
+
+/* CRU_MODE_CON */
+enum {
+ GPLL_MODE_SHIFT = 12,
+ GPLL_MODE_MASK = 3,
+ GPLL_MODE_SLOW = 0,
+ GPLL_MODE_NORMAL,
+ GPLL_MODE_DEEP,
+
+ CPLL_MODE_SHIFT = 8,
+ CPLL_MODE_MASK = 3,
+ CPLL_MODE_SLOW = 0,
+ CPLL_MODE_NORMAL,
+ CPLL_MODE_DEEP,
+
+ DPLL_MODE_SHIFT = 4,
+ DPLL_MODE_MASK = 3,
+ DPLL_MODE_SLOW = 0,
+ DPLL_MODE_NORMAL,
+ DPLL_MODE_DEEP,
+
+ APLL_MODE_SHIFT = 0,
+ APLL_MODE_MASK = 3,
+ APLL_MODE_SLOW = 0,
+ APLL_MODE_NORMAL,
+ APLL_MODE_DEEP,
+};
+
+/* CRU_APLL_CON0 */
+enum {
+ CLKR_SHIFT = 8,
+ CLKR_MASK = 0x3f,
+
+ CLKOD_SHIFT = 0,
+ CLKOD_MASK = 0x3f,
+};
+
+/* CRU_APLL_CON1 */
+enum {
+ CLKF_SHIFT = 0,
+ CLKF_MASK = 0x1fff,
+};
+
+#endif
diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index 1f8e41739d..b66e81e810 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -5,5 +5,6 @@
#
obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3188) += clk_rk3188.o
obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
obj-$(CONFIG_ROCKCHIP_RK3399) += clk_rk3399.o
diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c
new file mode 100644
index 0000000000..c276772136
--- /dev/null
+++ b/drivers/clk/rockchip/clk_rk3188.c
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ * (C) Copyright 2016 Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <errno.h>
+#include <mapmem.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3188.h>
+#include <asm/arch/grf_rk3188.h>
+#include <asm/arch/hardware.h>
+#include <dt-bindings/clock/rk3188-cru.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/uclass-internal.h>
+#include <linux/log2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum rk3188_clk_type {
+ RK3188_CRU,
+ RK3188A_CRU,
+};
+
+struct rk3188_clk_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_rockchip_rk3188_cru dtd;
+#endif
+};
+
+struct pll_div {
+ u32 nr;
+ u32 nf;
+ u32 no;
+};
+
+enum {
+ VCO_MAX_HZ = 2200U * 1000000,
+ VCO_MIN_HZ = 440 * 1000000,
+ OUTPUT_MAX_HZ = 2200U * 1000000,
+ OUTPUT_MIN_HZ = 30 * 1000000,
+ FREF_MAX_HZ = 2200U * 1000000,
+ FREF_MIN_HZ = 30 * 1000,
+};
+
+enum {
+ /* PLL CON0 */
+ PLL_OD_MASK = 0x0f,
+
+ /* PLL CON1 */
+ PLL_NF_MASK = 0x1fff,
+
+ /* PLL CON2 */
+ PLL_BWADJ_MASK = 0x0fff,
+
+ /* PLL CON3 */
+ PLL_RESET_SHIFT = 5,
+
+ /* GRF_SOC_STATUS0 */
+ SOCSTS_DPLL_LOCK = 1 << 5,
+ SOCSTS_APLL_LOCK = 1 << 6,
+ SOCSTS_CPLL_LOCK = 1 << 7,
+ SOCSTS_GPLL_LOCK = 1 << 8,
+};
+
+#define RATE_TO_DIV(input_rate, output_rate) \
+ ((input_rate) / (output_rate) - 1);
+
+#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
+
+#define PLL_DIVISORS(hz, _nr, _no) {\
+ .nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
+ _Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
+ (_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
+ "divisors on line " __stringify(__LINE__));
+
+/* Keep divisors as low as possible to reduce jitter and power usage */
+static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
+static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
+
+static int rkclk_set_pll(struct rk3188_cru *cru, enum rk_clk_id clk_id,
+ const struct pll_div *div, bool has_bwadj)
+{
+ int pll_id = rk_pll_id(clk_id);
+ struct rk3188_pll *pll = &cru->pll[pll_id];
+ /* All PLLs have same VCO and output frequency range restrictions. */
+ uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
+ uint output_hz = vco_hz / div->no;
+
+ debug("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
+ (uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
+ assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
+ output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
+ (div->no == 1 || !(div->no % 2)));
+
+ /* enter reset */
+ rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);
+
+ rk_clrsetreg(&pll->con0,
+ CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK,
+ ((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
+ rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
+
+ if (has_bwadj)
+ rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
+
+ udelay(10);
+
+ /* return from reset */
+ rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);
+
+ return 0;
+}
+
+static int rkclk_configure_ddr(struct rk3188_cru *cru, struct rk3188_grf *grf,
+ unsigned int hz, bool has_bwadj)
+{
+ static const struct pll_div dpll_cfg[] = {
+ {.nf = 25, .nr = 2, .no = 1},
+ {.nf = 400, .nr = 9, .no = 2},
+ {.nf = 500, .nr = 9, .no = 2},
+ {.nf = 100, .nr = 3, .no = 1},
+ };
+ int cfg;
+
+ switch (hz) {
+ case 300000000:
+ cfg = 0;
+ break;
+ case 533000000: /* actually 533.3P MHz */
+ cfg = 1;
+ break;
+ case 666000000: /* actually 666.6P MHz */
+ cfg = 2;
+ break;
+ case 800000000:
+ cfg = 3;
+ break;
+ default:
+ debug("Unsupported SDRAM frequency");
+ return -EINVAL;
+ }
+
+ /* pll enter slow-mode */
+ rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+ DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
+
+ rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg], has_bwadj);
+
+ /* wait for pll lock */
+ while (!(readl(&grf->soc_status0) & SOCSTS_DPLL_LOCK))
+ udelay(1);
+
+ /* PLL enter normal-mode */
+ rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+ DPLL_MODE_NORMAL << DPLL_MODE_SHIFT);
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,
+ bool has_bwadj)
+{
+ u32 aclk_div, hclk_div, pclk_div, h2p_div;
+
+ /* pll enter slow-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+ CPLL_MODE_MASK << CPLL_MODE_SHIFT,
+ GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
+ CPLL_MODE_SLOW << CPLL_MODE_SHIFT);
+
+ /* init pll */
+ rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg, has_bwadj);
+ rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg, has_bwadj);
+
+ /* waiting for pll lock */
+ while ((readl(&grf->soc_status0) &
+ (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
+ (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
+ udelay(1);
+
+ /*
+ * cpu clock pll source selection and
+ * reparent aclk_cpu_pre from apll to gpll
+ * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+ */
+ aclk_div = RATE_TO_DIV(GPLL_HZ, CPU_ACLK_HZ);
+ assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+ rk_clrsetreg(&cru->cru_clksel_con[0],
+ CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT |
+ A9_CPU_DIV_MASK << A9_CPU_DIV_SHIFT,
+ CPU_ACLK_PLL_SELECT_GPLL << CPU_ACLK_PLL_SHIFT |
+ aclk_div << A9_CPU_DIV_SHIFT);
+
+ hclk_div = ilog2(CPU_ACLK_HZ / CPU_HCLK_HZ);
+ assert((1 << hclk_div) * CPU_HCLK_HZ == CPU_ACLK_HZ && hclk_div < 0x3);
+ pclk_div = ilog2(CPU_ACLK_HZ / CPU_PCLK_HZ);
+ assert((1 << pclk_div) * CPU_PCLK_HZ == CPU_ACLK_HZ && pclk_div < 0x4);
+ h2p_div = ilog2(CPU_HCLK_HZ / CPU_H2P_HZ);
+ assert((1 << h2p_div) * CPU_H2P_HZ == CPU_HCLK_HZ && pclk_div < 0x3);
+
+ rk_clrsetreg(&cru->cru_clksel_con[1],
+ AHB2APB_DIV_MASK << AHB2APB_DIV_SHIFT |
+ CPU_PCLK_DIV_MASK << CPU_PCLK_DIV_SHIFT |
+ CPU_HCLK_DIV_MASK << CPU_HCLK_DIV_SHIFT,
+ h2p_div << AHB2APB_DIV_SHIFT |
+ pclk_div << CPU_PCLK_DIV_SHIFT |
+ hclk_div << CPU_HCLK_DIV_SHIFT);
+
+ /*
+ * peri clock pll source selection and
+ * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+ */
+ aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
+ assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+ hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
+ assert((1 << hclk_div) * PERI_HCLK_HZ ==
+ PERI_ACLK_HZ && (hclk_div < 0x4));
+
+ pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
+ assert((1 << pclk_div) * PERI_PCLK_HZ ==
+ PERI_ACLK_HZ && (pclk_div < 0x4));
+
+ rk_clrsetreg(&cru->cru_clksel_con[10],
+ PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
+ PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
+ PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
+ PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
+ pclk_div << PERI_PCLK_DIV_SHIFT |
+ hclk_div << PERI_HCLK_DIV_SHIFT |
+ aclk_div << PERI_ACLK_DIV_SHIFT);
+
+ /* PLL enter normal-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ GPLL_MODE_MASK << GPLL_MODE_SHIFT |
+ CPLL_MODE_MASK << CPLL_MODE_SHIFT,
+ GPLL_MODE_NORMAL << GPLL_MODE_SHIFT |
+ CPLL_MODE_NORMAL << CPLL_MODE_SHIFT);
+}
+#endif
+
+/* Get pll rate by id */
+static uint32_t rkclk_pll_get_rate(struct rk3188_cru *cru,
+ enum rk_clk_id clk_id)
+{
+ uint32_t nr, no, nf;
+ uint32_t con;
+ int pll_id = rk_pll_id(clk_id);
+ struct rk3188_pll *pll = &cru->pll[pll_id];
+ static u8 clk_shift[CLK_COUNT] = {
+ 0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
+ GPLL_MODE_SHIFT
+ };
+ uint shift;
+
+ con = readl(&cru->cru_mode_con);
+ shift = clk_shift[clk_id];
+ switch ((con >> shift) & APLL_MODE_MASK) {
+ case APLL_MODE_SLOW:
+ return OSC_HZ;
+ case APLL_MODE_NORMAL:
+ /* normal mode */
+ con = readl(&pll->con0);
+ no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1;
+ nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1;
+ con = readl(&pll->con1);
+ nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1;
+
+ return (24 * nf / (nr * no)) * 1000000;
+ case APLL_MODE_DEEP:
+ default:
+ return 32768;
+ }
+}
+
+static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate,
+ int periph)
+{
+ uint div;
+ u32 con;
+
+ switch (periph) {
+ case HCLK_EMMC:
+ con = readl(&cru->cru_clksel_con[12]);
+ div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
+ break;
+ case HCLK_SDMMC:
+ con = readl(&cru->cru_clksel_con[11]);
+ div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
+ break;
+ case HCLK_SDIO:
+ con = readl(&cru->cru_clksel_con[12]);
+ div = (con >> SDIO_DIV_SHIFT) & SDIO_DIV_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return DIV_TO_RATE(gclk_rate, div);
+}
+
+static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate,
+ int periph, uint freq)
+{
+ int src_clk_div;
+
+ debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
+ src_clk_div = RATE_TO_DIV(gclk_rate, freq);
+ assert(src_clk_div <= 0x3f);
+
+ switch (periph) {
+ case HCLK_EMMC:
+ rk_clrsetreg(&cru->cru_clksel_con[12],
+ EMMC_DIV_MASK << EMMC_DIV_SHIFT,
+ src_clk_div << EMMC_DIV_SHIFT);
+ break;
+ case HCLK_SDMMC:
+ rk_clrsetreg(&cru->cru_clksel_con[11],
+ MMC0_DIV_MASK << MMC0_DIV_SHIFT,
+ src_clk_div << MMC0_DIV_SHIFT);
+ break;
+ case HCLK_SDIO:
+ rk_clrsetreg(&cru->cru_clksel_con[12],
+ SDIO_DIV_MASK << SDIO_DIV_SHIFT,
+ src_clk_div << SDIO_DIV_SHIFT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return rockchip_mmc_get_clk(cru, gclk_rate, periph);
+}
+
+static ulong rockchip_spi_get_clk(struct rk3188_cru *cru, uint gclk_rate,
+ int periph)
+{
+ uint div;
+ u32 con;
+
+ switch (periph) {
+ case SCLK_SPI0:
+ con = readl(&cru->cru_clksel_con[25]);
+ div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK;
+ break;
+ case SCLK_SPI1:
+ con = readl(&cru->cru_clksel_con[25]);
+ div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return DIV_TO_RATE(gclk_rate, div);
+}
+
+static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate,
+ int periph, uint freq)
+{
+ int src_clk_div = RATE_TO_DIV(gclk_rate, freq);
+
+ switch (periph) {
+ case SCLK_SPI0:
+ assert(src_clk_div <= SPI0_DIV_MASK);
+ rk_clrsetreg(&cru->cru_clksel_con[25],
+ SPI0_DIV_MASK << SPI0_DIV_SHIFT,
+ src_clk_div << SPI0_DIV_SHIFT);
+ break;
+ case SCLK_SPI1:
+ assert(src_clk_div <= SPI1_DIV_MASK);
+ rk_clrsetreg(&cru->cru_clksel_con[25],
+ SPI1_DIV_MASK << SPI1_DIV_SHIFT,
+ src_clk_div << SPI1_DIV_SHIFT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return rockchip_spi_get_clk(cru, gclk_rate, periph);
+}
+
+static ulong rk3188_clk_get_rate(struct clk *clk)
+{
+ struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong new_rate, gclk_rate;
+
+ gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
+ switch (clk->id) {
+ case 1 ... 4:
+ new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
+ break;
+ case HCLK_EMMC:
+ case HCLK_SDMMC:
+ case HCLK_SDIO:
+ new_rate = rockchip_mmc_get_clk(priv->cru, PERI_HCLK_HZ,
+ clk->id);
+ break;
+ case SCLK_SPI0:
+ case SCLK_SPI1:
+ new_rate = rockchip_spi_get_clk(priv->cru, PERI_PCLK_HZ,
+ clk->id);
+ break;
+ case PCLK_I2C0:
+ case PCLK_I2C1:
+ case PCLK_I2C2:
+ case PCLK_I2C3:
+ case PCLK_I2C4:
+ return gclk_rate;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
+static ulong rk3188_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
+ struct rk3188_cru *cru = priv->cru;
+ ulong new_rate;
+
+ switch (clk->id) {
+ case CLK_DDR:
+ new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate,
+ priv->has_bwadj);
+ break;
+ case HCLK_EMMC:
+ case HCLK_SDMMC:
+ case HCLK_SDIO:
+ new_rate = rockchip_mmc_set_clk(cru, PERI_HCLK_HZ,
+ clk->id, rate);
+ break;
+ case SCLK_SPI0:
+ case SCLK_SPI1:
+ new_rate = rockchip_spi_set_clk(cru, PERI_PCLK_HZ,
+ clk->id, rate);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
+static struct clk_ops rk3188_clk_ops = {
+ .get_rate = rk3188_clk_get_rate,
+ .set_rate = rk3188_clk_set_rate,
+};
+
+static int rk3188_clk_ofdata_to_platdata(struct udevice *dev)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct rk3188_clk_priv *priv = dev_get_priv(dev);
+
+ priv->cru = (struct rk3188_cru *)dev_get_addr(dev);
+#endif
+
+ return 0;
+}
+
+static int rk3188_clk_probe(struct udevice *dev)
+{
+ struct rk3188_clk_priv *priv = dev_get_priv(dev);
+ enum rk3188_clk_type type = dev_get_driver_data(dev);
+
+ priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ if (IS_ERR(priv->grf))
+ return PTR_ERR(priv->grf);
+ priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;
+
+#ifdef CONFIG_SPL_BUILD
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct rk3188_clk_plat *plat = dev_get_platdata(dev);
+
+ priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
+#endif
+
+ rkclk_init(priv->cru, priv->grf, priv->has_bwadj);
+#endif
+
+ return 0;
+}
+
+static int rk3188_clk_bind(struct udevice *dev)
+{
+ int ret;
+
+ /* The reset driver does not have a device node, so bind it here */
+ ret = device_bind_driver(gd->dm_root, "rk3188_sysreset", "reset", &dev);
+ if (ret)
+ debug("Warning: No rk3188 reset driver: ret=%d\n", ret);
+
+ return 0;
+}
+
+static const struct udevice_id rk3188_clk_ids[] = {
+ { .compatible = "rockchip,rk3188-cru", .data = RK3188_CRU },
+ { .compatible = "rockchip,rk3188a-cru", .data = RK3188A_CRU },
+ { }
+};
+
+U_BOOT_DRIVER(rockchip_rk3188_cru) = {
+ .name = "rockchip_rk3188_cru",
+ .id = UCLASS_CLK,
+ .of_match = rk3188_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct rk3188_clk_priv),
+ .platdata_auto_alloc_size = sizeof(struct rk3188_clk_plat),
+ .ops = &rk3188_clk_ops,
+ .bind = rk3188_clk_bind,
+ .ofdata_to_platdata = rk3188_clk_ofdata_to_platdata,
+ .probe = rk3188_clk_probe,
+};
--
2.11.0
More information about the U-Boot
mailing list