[U-Boot] [U-Boot, v2, 4/8] board: sama5d4_xplained: enable early debug UART
Andreas Bießmann
andreas at biessmann.org
Sat Feb 4 22:49:20 UTC 2017
On Fri, Oct 28, 2016 at 03:16:45PM +0800, Wenyou Yang wrote:
> Enable early debug UART to debug problems when an ICE or other
> debug mechanism is not available.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
Reviewed-by: Andreas Bießmann <andreas at biessmann.org>
> ---
>
> Changes in v2: None
>
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 15 ++++++++++++++-
> configs/sama5d4_xplained_mmc_defconfig | 6 ++++++
> configs/sama5d4_xplained_nandflash_defconfig | 6 ++++++
> configs/sama5d4_xplained_spiflash_defconfig | 6 ++++++
> include/configs/sama5d4_xplained.h | 2 ++
> 5 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
> index 2b51e4c..c46a7a4 100644
> --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
> +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
> @@ -16,6 +16,7 @@
> #include <asm/arch/sama5d3_smc.h>
> #include <asm/arch/sama5d4.h>
> #include <atmel_hlcdc.h>
> +#include <debug_uart.h>
> #include <lcd.h>
> #include <net.h>
> #include <netdev.h>
> @@ -197,12 +198,24 @@ static void sama5d4_xplained_serial3_hw_init(void)
> at91_periph_clk_enable(ATMEL_ID_USART3);
> }
>
> -int board_early_init_f(void)
> +#ifdef CONFIG_DEBUG_UART_BOARD_INIT
> +void board_debug_uart_init(void)
> {
> sama5d4_xplained_serial3_hw_init();
> +}
> +#endif
>
> +#ifdef CONFIG_BOARD_EARLY_INIT_F
> +int board_early_init_f(void)
> +{
> +#ifdef CONFIG_DEBUG_UART
> + debug_uart_init();
> +#else
> + sama5d4_xplained_serial3_hw_init();
> +#endif
> return 0;
> }
> +#endif
>
> int board_init(void)
> {
> diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
> index e25b26a..e7518e8 100644
> --- a/configs/sama5d4_xplained_mmc_defconfig
> +++ b/configs/sama5d4_xplained_mmc_defconfig
> @@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y
> CONFIG_PINCTRL=y
> CONFIG_PINCTRL_AT91=y
> CONFIG_DM_SERIAL=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEBUG_UART_ATMEL=y
> +CONFIG_DEBUG_UART_BASE=0xfc00c000
> +CONFIG_DEBUG_UART_CLOCK=0
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_ATMEL_USART=y
> CONFIG_DM_SPI=y
> CONFIG_ATMEL_SPI=y
> diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
> index 53dfdd6..790d7d1 100644
> --- a/configs/sama5d4_xplained_nandflash_defconfig
> +++ b/configs/sama5d4_xplained_nandflash_defconfig
> @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y
> CONFIG_PINCTRL=y
> CONFIG_PINCTRL_AT91=y
> CONFIG_DM_SERIAL=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEBUG_UART_ATMEL=y
> +CONFIG_DEBUG_UART_BASE=0xfc00c000
> +CONFIG_DEBUG_UART_CLOCK=0
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_ATMEL_USART=y
> CONFIG_DM_SPI=y
> CONFIG_ATMEL_SPI=y
> diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
> index 17fd9a2..af6263f 100644
> --- a/configs/sama5d4_xplained_spiflash_defconfig
> +++ b/configs/sama5d4_xplained_spiflash_defconfig
> @@ -45,6 +45,12 @@ CONFIG_SPI_FLASH_ATMEL=y
> CONFIG_PINCTRL=y
> CONFIG_PINCTRL_AT91=y
> CONFIG_DM_SERIAL=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEBUG_UART_ATMEL=y
> +CONFIG_DEBUG_UART_BASE=0xfc00c000
> +CONFIG_DEBUG_UART_CLOCK=0
> +CONFIG_DEBUG_UART_BOARD_INIT=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_ATMEL_USART=y
> CONFIG_DM_SPI=y
> CONFIG_ATMEL_SPI=y
> diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
> index 1173583..8032164 100644
> --- a/include/configs/sama5d4_xplained.h
> +++ b/include/configs/sama5d4_xplained.h
> @@ -15,6 +15,8 @@
>
> #include "at91-sama5_common.h"
>
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
More information about the U-Boot
mailing list