[U-Boot] [PATCH 05/10] stm32f7: clk: remove usart1 clock enable from board init

[Vikas Manocha]

Before clock driver availability it was required to enable usart1 clock
for serial init but now with clock driver is taking care of usart1 clock.

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
---
 board/st/stm32f746-disco/stm32f746-disco.c | 1 -
 drivers/clk/clk_stm32f7.c                  | 3 ---
 2 files changed, 4 deletions(-)

diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index 72212f4..ee1deb5 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -380,7 +380,6 @@ int board_early_init_f(void)
 	int res;
 
 	res = uart_setup_gpio();
-	clock_setup(USART1_CLOCK_CFG);
 	if (res)
 		return res;
 
diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c
index 89b123e..60cf502 100644
--- a/drivers/clk/clk_stm32f7.c
+++ b/drivers/clk/clk_stm32f7.c
@@ -226,9 +226,6 @@ static int stm32_clk_enable(struct clk *clk)
 void clock_setup(int peripheral)
 {
 	switch (peripheral) {
-	case USART1_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_USART1EN);
-		break;
 	case GPIO_A_CLOCK_CFG:
 		setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_A_EN);
 		break;
-- 
1.9.1