[U-Boot] [PATCH v5 0/2] pinctrl: at91: Add pinctrl driver
Wenyou Yang
wenyou.yang at atmel.com
Tue Feb 7 06:07:17 UTC 2017
The purpose of this patch set is to add the pinctrl driver for AT91
PIO controller.
Changes in v5:
- Rebase on the master branch on git://git.denx.de/u-boot-atmel.git
commit: 0ff27d4a94637d4b1937c625d33212375bd118d9
Changes in v4:
- Fix the incomplete conversion of the peripheral configurations on
the sama5d3, sam9x5, and sam9n12.
Changes in v3:
- Add support for OUTPUT config
Changes in v2:
- Add more information for the PINCTRL_AT91 option's help.
- Add more comments for the callback of struct at91_pinctrl_mux_ops.
- Use clrsetbits_le32() in set_drive_strength().
- Add the brackets for readability.
- Use debug() to print the message to debug, instead of printf().
- Remove not veryuseful at91_bank_base().
- Add Reviewed-by tag.
Wenyou Yang (2):
gpio: at91_gpio: Remove CPU_HAS_PIO3 macro
pinctrl: at91: Add pinctrl driver
arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 106 ++---
arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 112 ++---
arch/arm/mach-at91/armv7/sama5d3_devices.c | 140 +++----
arch/arm/mach-at91/include/mach/at91_pio.h | 67 +--
arch/arm/mach-at91/include/mach/at91sam9x5.h | 1 -
arch/arm/mach-at91/include/mach/sama5d3.h | 1 -
arch/arm/mach-at91/include/mach/sama5d4.h | 1 -
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 10 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 90 ++--
board/atmel/sama5d3xek/sama5d3xek.c | 64 +--
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 148 +++----
board/atmel/sama5d4ek/sama5d4ek.c | 136 +++----
board/denx/ma5d4evk/ma5d4evk.c | 178 ++++----
board/l+g/vinco/vinco.c | 70 ++--
drivers/gpio/at91_gpio.c | 142 +++++--
drivers/pinctrl/Kconfig | 14 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-at91.c | 453 +++++++++++++++++++++
include/dt-bindings/pinctrl/at91.h | 2 +
19 files changed, 1131 insertions(+), 605 deletions(-)
create mode 100644 drivers/pinctrl/pinctrl-at91.c
--
2.11.0
More information about the U-Boot
mailing list