[U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT
Wenyou.Yang at microchip.com
Wenyou.Yang at microchip.com
Tue Feb 7 06:15:52 UTC 2017
Hi Andreas,
Thank you very much for your review! a lot of patches.
> -----Original Message-----
> From: Andreas Bießmann [mailto:andreas at biessmann.org]
> Sent: 2017年2月7日 3:52
> To: Wenyou Yang - A41535 <Wenyou.Yang at microchip.com>; U-Boot Mailing List
> <u-boot at lists.denx.de>
> Subject: Re: [U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support
> DM/DT
>
> Hi Wenyou,
>
> On 28.10.16 09:16, Wenyou Yang wrote:
> > The purpose of patch set is to convert the board to support Device
> > Tree and Driver Model.
> >
> > They are based on the following patches:
> > 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver
> > http://lists.denx.de/pipermail/u-boot/2016-October/270991.html
> > 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of
> SAMA5D4
> > http://lists.denx.de/pipermail/u-boot/2016-October/271004.html
> > 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug
> UART
> > http://lists.denx.de/pipermail/u-boot/2016-October/270250.html
> > 4./ [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support
> > http://lists.denx.de/pipermail/u-boot/2016-October/270687.html
> > 5./ [PATCH v10] dm: at91: Add driver model support for the spi driver
> > http://lists.denx.de/pipermail/u-boot/2016-October/270516.html
> >
>
> could you please send this series rebased on current ToT?
Okay, I will rebase it and sent.
>
> Andreas
>
> > Changes in v2:
> > - Restore the wrong removal #define CONFIG_USB_ETHER.
> > - Update the commit log.
> > - Restore the wrong removal of USB related code.
> > - Update the commit log.
> > - Restore wrong removal of #define CONFIG_USB_ETHER.
> > - Update the commit log.
> > - Restore the wrong removal USB related code.
> > - Update the commit log.
> >
> > Wenyou Yang (8):
> > configs: at91-sama5_common: fix for CONFIG_AT91_GPIO
> > board: sama5d4_xplained: move config options to defconfig
> > board: sama5d4_xplained: clean up code
> > board: sama5d4_xplained: enable early debug UART
> > board: sama5d4ek: move config options to defconfig
> > board: sama5d4ek: clean up code
> > board: sama5d4ek: enable early debug UART
> > configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig
> >
> > board/atmel/sama5d4_xplained/sama5d4_xplained.c | 100 ++++-------------------
> > board/atmel/sama5d4ek/sama5d4ek.c | 101 ++++--------------------
> > configs/sama5d4_xplained_mmc_defconfig | 31 +++++++-
> > configs/sama5d4_xplained_nandflash_defconfig | 33 +++++++-
> > configs/sama5d4_xplained_spiflash_defconfig | 31 +++++++-
> > configs/sama5d4ek_mmc_defconfig | 30 +++++++
> > configs/sama5d4ek_nandflash_defconfig | 30 +++++++
> > configs/sama5d4ek_spiflash_defconfig | 30 +++++++
> > include/configs/at91-sama5_common.h | 2 +
> > include/configs/sama5d4_xplained.h | 28 +------
> > include/configs/sama5d4ek.h | 29 +------
> > 11 files changed, 216 insertions(+), 229 deletions(-)
> >
Best Regards,
Wenyou Yang
More information about the U-Boot
mailing list