[U-Boot] [PATCH v2 4/7] STiH410: Add STi SDHCI driver
Patrice CHOTARD
patrice.chotard at st.com
Tue Feb 7 12:51:35 UTC 2017
Hi Jaehoon
On 02/07/2017 11:42 AM, Jaehoon Chung wrote:
> Hi Patrice,
>
> On 02/03/2017 02:13 AM, patrice.chotard at st.com wrote:
>> From: Patrice Chotard <patrice.chotard at st.com>
>>
>> Add SDHCI host controller found on STMicroelctronics SoCs
>
> Just wonder what is flashSS?
> Add the minor comments.
On some ST SoCs, i.e. STiH407/STiH410, the MMC devices can live inside a
dedicated flashSS sub-system that provides an extend subset of registers
that can be used to configure the Arasan MMC/SD Host Controller.
This means, that the SDHCI Arasan Controller can be configured to be
eMMC4.5 or 4.3 spec compliant.
W/o these settings the SDHCI will configure and use the MMC/SD
controller with limited features e.g. PIO mode, no DMA, no HS etc.
i will add a comments about that
>
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
>> ---
>> arch/arm/Kconfig | 2 +
>> arch/arm/include/asm/arch-stih410/sdhci.h | 69 +++++++++++++++
>> drivers/mmc/Kconfig | 7 ++
>> drivers/mmc/Makefile | 1 +
>> drivers/mmc/sti_sdhci.c | 140 ++++++++++++++++++++++++++++++
>> 5 files changed, 219 insertions(+)
>> create mode 100644 arch/arm/include/asm/arch-stih410/sdhci.h
>> create mode 100644 drivers/mmc/sti_sdhci.c
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index b91a5b7..477f36b 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -987,6 +987,8 @@ config ARCH_STI
>> select CPU_V7
>> select DM
>> select DM_SERIAL
>> + select BLK
>> + select DM_MMC
>> help
>> Support for STMicroelectronics STiH407/10 SoC family.
>> This SoC is used on Linaro 96Board STiH410-B2260
>> diff --git a/arch/arm/include/asm/arch-stih410/sdhci.h b/arch/arm/include/asm/arch-stih410/sdhci.h
>> new file mode 100644
>> index 0000000..f45b961
>> --- /dev/null
>> +++ b/arch/arm/include/asm/arch-stih410/sdhci.h
>> @@ -0,0 +1,69 @@
>> +/*
>> + * (C) Copyright 2017 Patrice Chotard <patrice.chotard at st.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#ifndef __STI_SDHCI_H__
>> +#define __STI_SDHCI_H__
>> +
>> +#define FLASHSS_MMC_CORE_CONFIG_1 0x400
>> +#define FLASHSS_MMC_CORECFG_TIMEOUT_CLK_UNIT_MHZ BIT(24)
>> +#define FLASHSS_MMC_CORECFG_TIMEOUT_CLK_FREQ_MIN BIT(12)
>> +
>> +#define STI_FLASHSS_MMC_CORE_CONFIG_1 \
>> + (FLASHSS_MMC_CORECFG_TIMEOUT_CLK_UNIT_MHZ | \
>> + FLASHSS_MMC_CORECFG_TIMEOUT_CLK_FREQ_MIN)
>> +
>> +#define FLASHSS_MMC_CORE_CONFIG_2 0x404
>> +#define FLASHSS_MMC_CORECFG_HIGH_SPEED BIT(28)
>> +#define FLASHSS_MMC_CORECFG_8BIT_EMMC BIT(20)
>> +#define MAX_BLK_LENGTH_1024 BIT(16)
>> +#define BASE_CLK_FREQ_200 0xc8
>> +
>> +
>
> remove unnecessary white space.
ok
>
>> +#define STI_FLASHSS_MMC_CORE_CONFIG2 \
>> + (FLASHSS_MMC_CORECFG_HIGH_SPEED | \
>> + FLASHSS_MMC_CORECFG_8BIT_EMMC | \
>> + MAX_BLK_LENGTH_1024 | \
>> + BASE_CLK_FREQ_200 << 0)
>> +
>> +#define STI_FLASHSS_SDCARD_CORE_CONFIG2 \
>> + (FLASHSS_MMC_CORECFG_HIGH_SPEED | \
>> + MAX_BLK_LENGTH_1024 | \
>> + BASE_CLK_FREQ_200)
>> +
>> +#define FLASHSS_MMC_CORE_CONFIG_3 0x408
>> +#define FLASHSS_MMC_CORECFG_SLOT_TYPE_EMMC BIT(28)
>> +#define FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT BIT(20)
>> +#define FLASHSS_MMC_CORECFG_3P3_VOLT BIT(8)
>> +#define FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT BIT(4)
>> +#define FLASHSS_MMC_CORECFG_SDMA BIT(0)
>> +
>> +#define STI_FLASHSS_MMC_CORE_CONFIG3 \
>> + (FLASHSS_MMC_CORECFG_SLOT_TYPE_EMMC | \
>> + FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_3P3_VOLT | \
>> + FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_SDMA)
>> +
>> +#define STI_FLASHSS_SDCARD_CORE_CONFIG3 \
>> + (FLASHSS_MMC_CORECFG_ASYNCH_INTR_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_3P3_VOLT | \
>> + FLASHSS_MMC_CORECFG_SUSP_RES_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_SDMA)
>> +
>> +#define FLASHSS_MMC_CORE_CONFIG_4 0x40c
>> +#define FLASHSS_MMC_CORECFG_D_DRIVER_SUPPORT BIT(20)
>> +#define FLASHSS_MMC_CORECFG_C_DRIVER_SUPPORT BIT(16)
>> +#define FLASHSS_MMC_CORECFG_A_DRIVER_SUPPORT BIT(12)
>> +
>> +#define STI_FLASHSS_MMC_CORE_CONFIG4 \
>> + (FLASHSS_MMC_CORECFG_D_DRIVER_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_C_DRIVER_SUPPORT | \
>> + FLASHSS_MMC_CORECFG_A_DRIVER_SUPPORT)
>> +
>> +#define ST_MMC_CCONFIG_REG_5 0x210
>> +#define SYSCONF_MMC1_ENABLE_BIT 3
>> +
>> +#endif /* _STI_SDHCI_H_ */
>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
>> index 0c07781..dfdec27 100644
>> --- a/drivers/mmc/Kconfig
>> +++ b/drivers/mmc/Kconfig
>> @@ -287,6 +287,13 @@ config MMC_SDHCI_SPEAR
>>
>> If unsure, say N.
>>
>> +config MMC_SDHCI_STI
>> + bool "SDHCI support for STMicroelectronics SoC"
>> + depends on MMC_SDHCI
>> + help
>> + This selects the Secure Digital Host Controller Interface (SDHCI)
>> + on STMicroelectronics STiH410 SoC.
>> +
>> config MMC_SDHCI_XENON
>> bool "SDHCI support for the Xenon SDHCI controller"
>> depends on MMC_SDHCI && DM_MMC && OF_CONTROL
>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
>> index e78bd0d..fc24926 100644
>> --- a/drivers/mmc/Makefile
>> +++ b/drivers/mmc/Makefile
>> @@ -62,6 +62,7 @@ obj-$(CONFIG_MMC_SDHCI_PIC32) += pic32_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_ROCKCHIP) += rockchip_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_S5P) += s5p_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_SPEAR) += spear_sdhci.o
>> +obj-$(CONFIG_MMC_SDHCI_STI) += sti_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_TEGRA) += tegra_mmc.o
>> obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
>> diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
>> new file mode 100644
>> index 0000000..7a76983
>> --- /dev/null
>> +++ b/drivers/mmc/sti_sdhci.c
>> @@ -0,0 +1,140 @@
>> +/*
>> + * Copyright (c) 2017
>> + * Patrice Chotard <patrice.chotard at st.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <mmc.h>
>> +#include <sdhci.h>
>> +#include <asm/arch/gpio.h>
>> +#include <asm/arch/sdhci.h>
>> +#include <asm/arch/sti.h>
>> +#include <asm/arch/syscfg.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +struct sti_sdhci_plat {
>> + struct mmc_config cfg;
>> + struct mmc mmc;
>> +};
>> +
>> +/**
>> + * sti_mmc_core_config: configure the Arasan HC
>> + * @regbase: base address
>> + * @mmc_instance: mmc instance id
>> + * Description: this function is to configure the Arasan MMC HC.
>> + * This should be called when the system starts in case of, on the SoC,
>> + * it is needed to configure the host controller.
>> + * This happens on some SoCs, i.e. StiH410, where the MMC0 inside the flashSS
>> + * needs to be configured as MMC 4.5 to have full capabilities.
>> + * W/o these settings the SDHCI could configure and use the embedded controller
>> + * with limited features.
>> + */
>> +static void sti_mmc_core_config(const u32 regbase, int mmc_instance)
>> +{
>> + unsigned long *sysconf;
>> +
>> + /* only MMC1 has a reset line */
>> + if (mmc_instance) {
>> + sysconf = (unsigned long *)(STIH410_SYSCONF5_BASE +
>> + ST_MMC_CCONFIG_REG_5);
>> + generic_set_bit(SYSCONF_MMC1_ENABLE_BIT, sysconf);
>> + }
>> +
>> + writel(STI_FLASHSS_MMC_CORE_CONFIG_1,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_1);
>> +
>> + if (mmc_instance) {
>> + writel(STI_FLASHSS_MMC_CORE_CONFIG2,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_2);
>> + writel(STI_FLASHSS_MMC_CORE_CONFIG3,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_3);
>> + } else {
>> + writel(STI_FLASHSS_SDCARD_CORE_CONFIG2,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_2);
>> + writel(STI_FLASHSS_SDCARD_CORE_CONFIG3,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_3);
>> + }
>> + writel(STI_FLASHSS_MMC_CORE_CONFIG4,
>> + regbase + FLASHSS_MMC_CORE_CONFIG_4);
>> +}
>> +
>> +int sti_sdhci_probe(struct udevice *dev)
>
> Maybe static?
yes, i will fix it
>
>> +{
>> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
>> + struct sti_sdhci_plat *plat = dev_get_platdata(dev);
>> + struct sdhci_host *host = dev_get_priv(dev);
>> + int ret, count, mmc_instance;
>> +
>> + /*
>> + * identify current mmc instance, mmc1 has a reset, not mmc0
>> + * MMC0 is wired to the SD slot,
>> + * MMC1 is wired on the high speed connector
>> + */
>> +
>> + fdt_getprop(gd->fdt_blob, dev->of_offset, "resets", &count);
>> + if (count < 0)
>> + mmc_instance = 0;
>> + else
>> + mmc_instance = 1;
>> +
>> + sti_mmc_core_config((const u32) host->ioaddr, mmc_instance);
>> +
>> + host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
>> + SDHCI_QUIRK_32BIT_DMA_ADDR |
>> + SDHCI_QUIRK_NO_HISPD_BIT;
>
> Is your host controller broken the HISPD bit?
Yes
>
> Best Regards,
> Jaehoon Chung
>
>> +
>> + host->host_caps = MMC_MODE_DDR_52MHz;
>> +
>> + ret = sdhci_setup_cfg(&plat->cfg, host, 50000000, 400000);
>> +
>> + if (ret)
>> + return ret;
>> +
>> + host->mmc = &plat->mmc;
>> + host->mmc->priv = host;
>> + host->mmc->dev = dev;
>> + upriv->mmc = host->mmc;
>> +
>> + return sdhci_probe(dev);
>> +}
>> +
>> +static int sti_sdhci_ofdata_to_platdata(struct udevice *dev)
>> +{
>> + struct sdhci_host *host = dev_get_priv(dev);
>> +
>> + host->name = strdup(dev->name);
>> + host->ioaddr = (void *)dev_get_addr(dev);
>> +
>> + host->bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
>> + "bus-width", 4);
>> +
>> + return 0;
>> +}
>> +
>> +static int sti_sdhci_bind(struct udevice *dev)
>> +{
>> + struct sti_sdhci_plat *plat = dev_get_platdata(dev);
>> +
>> + return sdhci_bind(dev, &plat->mmc, &plat->cfg);
>> +}
>> +
>> +static const struct udevice_id sti_sdhci_ids[] = {
>> + { .compatible = "st,sdhci" },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(sti_mmc) = {
>> + .name = "sti_sdhci",
>> + .id = UCLASS_MMC,
>> + .of_match = sti_sdhci_ids,
>> + .bind = sti_sdhci_bind,
>> + .ops = &sdhci_ops,
>> + .ofdata_to_platdata = sti_sdhci_ofdata_to_platdata,
>> + .probe = sti_sdhci_probe,
>> + .priv_auto_alloc_size = sizeof(struct sdhci_host),
>> + .platdata_auto_alloc_size = sizeof(struct sti_sdhci_plat),
>> +};
>>
>
More information about the U-Boot
mailing list