[U-Boot] [u-boot PATCH v3 7/8] ARM: k2g: setup PRU ethernet MAC addresses

Tom Rini trini at konsulko.com
Tue Feb 7 18:28:27 UTC 2017


On Tue, Feb 07, 2017 at 09:52:25AM +0200, Igor Grinberg wrote:
> Hi Roger,
> 
> On 02/06/17 11:36, Roger Quadros wrote:
> > PRU ethernet MAC address range is present in the
> > board EEPROM. Parse it and setup eth?addr
> > environment variables.
> > 
> > Signed-off-by: Roger Quadros <rogerq at ti.com>
> > Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>
> > ---
> >  board/ti/ks2_evm/board_k2g.c | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
> > index 40edbaa..a738dd2 100644
> > --- a/board/ti/ks2_evm/board_k2g.c
> > +++ b/board/ti/ks2_evm/board_k2g.c
> > @@ -12,6 +12,7 @@
> >  #include <asm/arch/psc_defs.h>
> >  #include <asm/arch/mmc_host_def.h>
> >  #include "mux-k2g.h"
> > +#include "../common/board_detect.h"
> >  
> >  #define SYS_CLK		24000000
> >  
> > @@ -149,6 +150,24 @@ int board_early_init_f(void)
> >  }
> >  #endif
> >  
> > +#ifdef CONFIG_BOARD_LATE_INIT
> > +int board_late_init(void)
> > +{
> > +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT)
> > +	int rc;
> > +
> > +	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
> > +			CONFIG_EEPROM_CHIP_ADDRESS);
> > +	if (rc)
> > +		printf("ti_i2c_eeprom_init failed %d\n", rc);
> > +
> > +	board_ti_set_ethaddr(1);
> 
> What if the MAC address has already been set in the environment?
> AFAIR, the MAC address in the environment has a higher precedence
> than others.
> May be I missed this, but I don't remember any discussion about changing
> this assumption.
> So, if the assumption is still correct, you shouldn't change the MAC in the env.

This is true.  Can we perhaps come up with a helper function that's
normally called to set the "eth?addr" to MAC if unset already, instead
of having N instances of the same logic?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170207/6b5f377d/attachment.sig>


More information about the U-Boot mailing list