[U-Boot] [PATCH 6/6] configs: dra7xx_evm: Enable SPL_DM
Lokesh Vutla
lokeshvutla at ti.com
Wed Feb 8 12:33:37 UTC 2017
Enable SPL_DM on all DRA7 based platforms.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
configs/dra7xx_evm_defconfig | 5 ++++-
configs/dra7xx_hs_evm_defconfig | 5 ++++-
include/configs/dra7xx_evm.h | 5 -----
include/configs/ti_omap5_common.h | 8 +-------
4 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 8e0b1681a6..bc8bedb9c8 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -14,7 +14,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
@@ -52,8 +54,10 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
CONFIG_DM=y
+CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
@@ -96,4 +100,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_SPL_OF_LIBFDT=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index ef1f9d348e..996c01418c 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -20,7 +20,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FASTBOOT=y
@@ -57,8 +59,10 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
CONFIG_DM=y
+CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
@@ -101,4 +105,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_SPL_OF_LIBFDT=y
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index bf8c041fb7..827d076e76 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -123,11 +123,6 @@
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_QSPI_QUAD_SUPPORT
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
-#endif
-
/*
* Default to using SPI for environment, etc.
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 37d65653a5..8f65c2242f 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -45,7 +45,7 @@
* Hardware drivers
*/
#define CONFIG_SYS_NS16550_CLK 48000000
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#if !defined(CONFIG_DM_SERIAL)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
@@ -163,14 +163,8 @@
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
#endif
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
#undef CONFIG_TIMER
-#undef CONFIG_DM_ETH
#endif
#endif /* __CONFIG_TI_OMAP5_COMMON_H */
--
2.11.0
More information about the U-Boot
mailing list