[U-Boot] [PATCH] board: ti: am57xx: enable input on mmc clock

Lokesh Vutla lokeshvutla at ti.com
Wed Feb 8 13:37:33 UTC 2017



On Wednesday 08 February 2017 06:43 PM, Sekhar Nori wrote:
> As per the latest pinmux data available for AM572x EVM,
> rev A3, input should be enabled on MMC clock lines for
> MMC2/2/3 for stable operation.
> 
> Further, AM572x TRM, SPRUHZ6, Revised June 2016, in
> section 18.4.6.1.1 "Pad Configuration Registers" states
> that input should be enabled for MMC 2/3/4 clock lines.
> 
> Enable input on MMC1 and MMC3 clock to match the latest
> pinmux data. Input is already enabled on MMC2 clock for
> BeagleBoard x15. Further, input is already enabled on all
> MMCx clocks for other AM57xx boards (AM572x and AM571x
> IDK).
> 
> Tested with HS and UHS SD card on AM572x EVM Rev A3.
> 
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh


More information about the U-Boot mailing list