[U-Boot] [PATCH v4 4/6] mvebu: usb: xhci: Add VBUS regulator supply to the host driver

Marek Vasut marex at denx.de
Thu Feb 9 10:39:11 UTC 2017


On 02/09/2017 11:39 AM, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
> 
> The USB device should linked to VBUS regulator through "vbus-supply"
> DTS property.
> This patch adds handling for "vbus-supply" property inside the USB
> device entry for turning on the VBUS regulator upon the host adapter probe.
> 
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Neta Zur Hershkovits <neta at marvell.com>
> Cc: Igal Liberman <igall at marvell.com>
> Cc: Haim Boot <hayim at marvell.com>
> ---
> Changes for v4:
> - Move the VBUS supply handling to use regulator framework
> - Select DM_REGULATOR by Kconfig for mvebu XHCI driver
> 
>  doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 29 +++++++++++++++++++++++
>  drivers/usb/host/Kconfig                          |  1 +
>  drivers/usb/host/xhci-mvebu.c                     | 14 ++++++++++-
>  3 files changed, 43 insertions(+), 1 deletion(-)
>  create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt
> 
> diff --git a/doc/device-tree-bindings/usb/marvell.xhci-usb.txt b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
> new file mode 100644
> index 0000000..cd21115
> --- /dev/null
> +++ b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
> @@ -0,0 +1,29 @@
> +Marvell SOC USB controllers
> +
> +This controller is integrated in Armada 3700/8K.
> +It uses the same properties as a generic XHCI host controller
> +
> +Required properties :
> + - compatible: should be one or more of:
> +   - "marvell,armada3700-xhci", "generic-xhci" for Armada 37xx SoCs
> +   - "marvell,armada-8k-xhci", "generic-xhci" for Armada A8K SoCs
> + - reg: should contain address and length of the standard XHCI
> +   register set for the device.
> + - interrupts: one XHCI interrupt should be described here.
> +
> +Optional properties:
> + - clocks: reference to a clock

I asked in the previous version , multiple times , what clock are these?

> + - vbus-supply : If present, specifies the fixed regulator to be turned on
> +   for providing power to the USB VBUS rail.
> +
> +Example:
> +	cpm_usb3_0: usb3 at 500000 {
> +		compatible = "marvell,armada-8k-xhci",
> +			     "generic-xhci";
> +		reg = <0x500000 0x4000>;
> +		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpm_syscon0 1 22>;
> +		vbus-supply = <&reg_usb3h0_vbus>;
> +		status = "disabled";
> +	};
> +
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 5129a57..0bf8274 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -25,6 +25,7 @@ config USB_XHCI_MVEBU
>  	bool "MVEBU USB 3.0 support"
>  	default y
>  	depends on ARCH_MVEBU
> +	select DM_REGULATOR
>  	help
>  	  Choose this option to add support for USB 3.0 driver on mvebu
>  	  SoCs, which includes Armada8K, Armada3700 and other Armada
> diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
> index 46eb937..35d89ab 100644
> --- a/drivers/usb/host/xhci-mvebu.c
> +++ b/drivers/usb/host/xhci-mvebu.c
> @@ -10,6 +10,7 @@
>  #include <dm.h>
>  #include <fdtdec.h>
>  #include <usb.h>
> +#include <power/regulator.h>
>  #include <asm/gpio.h>
>  
>  #include "xhci.h"
> @@ -44,12 +45,23 @@ static int xhci_usb_probe(struct udevice *dev)
>  	struct mvebu_xhci_platdata *plat = dev_get_platdata(dev);
>  	struct mvebu_xhci *ctx = dev_get_priv(dev);
>  	struct xhci_hcor *hcor;
> -	int len;
> +	int len, ret;
> +	struct udevice *regulator;
>  
>  	ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
>  	len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
>  	hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
>  
> +	ret = device_get_supply_regulator(dev, "vbus-supply", &regulator);
> +	if (!ret) {
> +		ret = regulator_set_enable(regulator, true);
> +		if (ret) {
> +			printf("Failed to turn ON the VBUS regulator\n");
> +			return ret;
> +		}
> +	} else
> +		printf("No VBUS regulator found\n");

This should be debug() , looks good otherwise.

>  	/* Enable USB xHCI (VBUS, reset etc) in board specific code */
>  	board_xhci_enable();
>  
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list