[U-Boot] [PATCH v5 4/6] mvebu: usb: xhci: Add VBUS regulator supply to the host driver

[Marek Vasut]

On 02/09/2017 04:30 PM, Konstantin Porotchkin wrote:
> 
> 
> On 02/09/2017 03:37 PM, Marek Vasut wrote:
>> On 02/09/2017 12:32 PM, kostap at marvell.com wrote:
>>> From: Konstantin Porotchkin <kostap at marvell.com>
>>>
>>> The USB device should linked to VBUS regulator through "vbus-supply"
>>> DTS property.
>>> This patch adds handling for "vbus-supply" property inside the USB
>>> device entry for turning on the VBUS regulator upon the host adapter
>>> probe.
>>>
>>> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
>>> Cc: Stefan Roese <sr at denx.de>
>>> Cc: Marek Vasut <marex at denx.de>
>>> Cc: Nadav Haklai <nadavh at marvell.com>
>>> Cc: Neta Zur Hershkovits <neta at marvell.com>
>>> Cc: Igal Liberman <igall at marvell.com>
>>> Cc: Haim Boot <hayim at marvell.com>
>>> ---
>>> Changes for v5:
>>> - Extended clocks description in documentation
>>> - Removed print for regulator not found case
>>>
>>>  doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 29
>>> +++++++++++++++++++++++
>>>  drivers/usb/host/Kconfig                          |  1 +
>>>  drivers/usb/host/xhci-mvebu.c                     | 13 +++++++++-
>>>  3 files changed, 42 insertions(+), 1 deletion(-)
>>>  create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt
>>>
>>> diff --git a/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
>>> b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
>>> new file mode 100644
>>> index 0000000..6cc370c
>>> --- /dev/null
>>> +++ b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
>>> @@ -0,0 +1,29 @@
>>> +Marvell SOC USB controllers
>>> +
>>> +This controller is integrated in Armada 3700/8K.
>>> +It uses the same properties as a generic XHCI host controller
>>> +
>>> +Required properties :
>>> + - compatible: should be one or more of:
>>> +   - "marvell,armada3700-xhci", "generic-xhci" for Armada 37xx SoCs
>>> +   - "marvell,armada-8k-xhci", "generic-xhci" for Armada A8K SoCs
>>> + - reg: should contain address and length of the standard XHCI
>>> +   register set for the device.
>>> + - interrupts: one XHCI interrupt should be described here.
>>> +
>>> +Optional properties:
>>> + - clocks: reference to a platform clocks that should be
>>> enabled/configured
>>> +   upon interface initialization. May not exist on all platforms.
>>
>> This is probably block clock then ?
>>
>> Otherwise,
>> Acked-by: Marek Vasut <marex at denx.de>
> Otherwise the the internal SoC clock does not require gating/muxing or
> any other configuration for making this USB host adapter running.
> Not sure if I understood your question well.

Well,  do these clock drive the USB block or do they drive the register
interface or what ?

>>> + - vbus-supply : If present, specifies the fixed regulator to be
>>> turned on
>>> +   for providing power to the USB VBUS rail.
>>> +
>>> +Example:
>>> +    cpm_usb3_0: usb3 at 500000 {
>>> +        compatible = "marvell,armada-8k-xhci",
>>> +                 "generic-xhci";
>>> +        reg = <0x500000 0x4000>;
>>> +        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>>> +        clocks = <&cpm_syscon0 1 22>;
>>> +        vbus-supply = <&reg_usb3h0_vbus>;
>>> +        status = "disabled";
>>> +    };
>>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>>> index 5129a57..0bf8274 100644
>>> --- a/drivers/usb/host/Kconfig
>>> +++ b/drivers/usb/host/Kconfig
>>> @@ -25,6 +25,7 @@ config USB_XHCI_MVEBU
>>>      bool "MVEBU USB 3.0 support"
>>>      default y
>>>      depends on ARCH_MVEBU
>>> +    select DM_REGULATOR
>>>      help
>>>        Choose this option to add support for USB 3.0 driver on mvebu
>>>        SoCs, which includes Armada8K, Armada3700 and other Armada
>>> diff --git a/drivers/usb/host/xhci-mvebu.c
>>> b/drivers/usb/host/xhci-mvebu.c
>>> index 46eb937..d880af1 100644
>>> --- a/drivers/usb/host/xhci-mvebu.c
>>> +++ b/drivers/usb/host/xhci-mvebu.c
>>> @@ -10,6 +10,7 @@
>>>  #include <dm.h>
>>>  #include <fdtdec.h>
>>>  #include <usb.h>
>>> +#include <power/regulator.h>
>>>  #include <asm/gpio.h>
>>>
>>>  #include "xhci.h"
>>> @@ -44,12 +45,22 @@ static int xhci_usb_probe(struct udevice *dev)
>>>      struct mvebu_xhci_platdata *plat = dev_get_platdata(dev);
>>>      struct mvebu_xhci *ctx = dev_get_priv(dev);
>>>      struct xhci_hcor *hcor;
>>> -    int len;
>>> +    int len, ret;
>>> +    struct udevice *regulator;
>>>
>>>      ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
>>>      len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
>>>      hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
>>>
>>> +    ret = device_get_supply_regulator(dev, "vbus-supply", &regulator);
>>> +    if (!ret) {
>>> +        ret = regulator_set_enable(regulator, true);
>>> +        if (ret) {
>>> +            printf("Failed to turn ON the VBUS regulator\n");
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>      /* Enable USB xHCI (VBUS, reset etc) in board specific code */
>>>      board_xhci_enable();
>>>
>>>
>>
>>


-- 
Best regards,
Marek Vasut