[U-Boot] [PATCH v3 12/17] cmd: mvebu: bubt: use get_nand_dev_by_index()
Grygorii Strashko
grygorii.strashko at ti.com
Fri Feb 10 20:22:59 UTC 2017
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.
Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
---
cmd/mvebu/bubt.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index b752927..bb9b7ed 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -309,24 +309,22 @@ static int is_spi_active(void)
#ifdef CONFIG_CMD_NAND
static int nand_burn_image(size_t image_size)
{
+ struct mtd_info *mtd;
int ret, block_size;
- nand_info_t *nand;
- int dev = nand_curr_device;
- if ((dev < 0) || (dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
- (!nand_info[dev].name)) {
+ mtd = get_nand_dev_by_index(nand_curr_device);
+ if (!mtd) {
puts("\nno devices available\n");
return -ENOMEDIUM;
}
- nand = &nand_info[dev];
- block_size = nand->erasesize;
+ block_size = mtd->erasesize;
/* Align U-Boot size to currently used blocksize */
image_size = ((image_size + (block_size - 1)) & (~(block_size - 1)));
/* Erase the U-BOOT image space */
printf("Erasing 0x%x - 0x%x:...", 0, (int)image_size);
- ret = nand_erase(nand, 0, image_size);
+ ret = nand_erase(mtd, 0, image_size);
if (ret) {
printf("Error!\n");
goto error;
@@ -336,7 +334,7 @@ static int nand_burn_image(size_t image_size)
/* Write the image to flash */
printf("Writing image:...");
printf("&image_size = 0x%p\n", (void *)&image_size);
- ret = nand_write(nand, 0, &image_size, (void *)get_load_addr());
+ ret = nand_write(mtd, 0, &image_size, (void *)get_load_addr());
if (ret)
printf("Error!\n");
else
--
2.10.1.dirty
More information about the U-Boot
mailing list