[U-Boot] [PATCH] mtd: nand: build MXS driver for MX7 as well

Andrey Yurovsky yurovsky at gmail.com
Fri Feb 10 18:33:34 UTC 2017


The i.MX7 has the same GPMI controller as i.MX6 and is covered by the MXS
driver. Tell Kconfig that we can use this driver on the MX7 platform (the MXS
driver already has the few i.MX7-specific changes needed for basic operation
and the board itself sets the pinmux correctly).

Tested on i.MX7D with the Sabre board and a NAND Flash soldered to U12.

Signed-off-by: Andrey Yurovsky <yurovsky at gmail.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 65bb040..a2ea9b1 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -82,7 +82,7 @@ config NAND_ARASAN
 
 config NAND_MXS
 	bool "MXS NAND support"
-	depends on MX6
+	depends on MX6 || MX7
 	help
 	  This enables NAND driver for the NAND flash controller on the
 	  MXS processors.
-- 
2.9.3



More information about the U-Boot mailing list