[U-Boot] [PATCH v6 1/3] SPL: add support to boot from a partition type

[Dalon Westergreen]

On Fri, 2017-02-10 at 16:43 -0500, Tom Rini wrote:
> On Thu, Feb 09, 2017 at 12:20:02PM -0800, Dalon Westergreen wrote:
> 
> > 
> > the socfpga bootrom supports mmc booting from either a raw image
> > starting at 0x0, or from a partition of type 0xa2.  This patch
> > adds support for locating the boot image in the first type 0xa2
> > partition found.
> > 
> > Assigned a partition number of -1 will cause a search for a
> > partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
> > and use it to find the u-boot image
> > 
> > Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>
> [snip]
> > 
> > +config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
> > +	hex "Partition Type on the MMC to load U-Boot from"
> > +	depends on SPL && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
> > +	default 0xa2

Works for me, only reason i did this was so that it didnt default to
0x0 for other devices.


> 
> This default should depend on ARCH_SOCFPGA as well.
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot