[U-Boot] [PATCH 2/2] i2c: sandbox: remove code snippet from Kconfig help

Masahiro Yamada yamada.masahiro at socionext.com
Sat Feb 11 03:39:55 UTC 2017


With the Kconfig re-sync with Linux 4.10, characters such as
'}', ';' in Kconfig help message cause warnings:

$ make defconfig
*** Default configuration is based on 'sandbox_defconfig'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';'

Drop the Device Tree fragment from the help.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 drivers/i2c/Kconfig | 23 +----------------------
 1 file changed, 1 insertion(+), 22 deletions(-)

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 71cc173..39f62da 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -132,28 +132,7 @@ config SYS_I2C_SANDBOX
 	help
 	  Enable I2C support for sandbox. This is an emulation of a real I2C
 	  bus. Devices can be attached to the bus using the device tree
-	  which specifies the driver to use. As an example, see this device
-	  tree fragment from sandbox.dts. It shows that the I2C bus has a
-	  single EEPROM at address 0x2c (7-bit address) which is emulated by
-	  the driver for "sandbox,i2c-eeprom", which is in
-	  drivers/misc/i2c_eeprom_emul.c.
-
-	  i2c at 0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		compatible = "sandbox,i2c";
-		clock-frequency = <400000>;
-		eeprom at 2c {
-			reg = <0x2c>;
-			compatible = "i2c-eeprom";
-			emul {
-				compatible = "sandbox,i2c-eeprom";
-				sandbox,filename = "i2c.bin";
-				sandbox,size = <128>;
-			};
-		};
-	};
+	  which specifies the driver to use.  See sandbox.dts as an example.
 
 config SYS_I2C_S3C24X0
 	bool "Samsung I2C driver"
-- 
2.7.4



More information about the U-Boot mailing list