[U-Boot] [PATCH 1/6] arm: am57xx: cl-som-am57x: fix XHCI registers base address

[Uri Mashiach]

Hi Tom,

On 02/09/2017 10:29 PM, Tom Rini wrote:
> On Thu, Feb 09, 2017 at 09:00:26AM +0200, Uri Mashiach wrote:
>
>> The following XHCI registers base address are set to OMAP5 values:
>> OMAP_XHCI_BASE, OMAP_OCP1_SCP_BASE, OMAP_OTG_WRAPPER_BASE
>>
>> Captured crash for "usb start" command:
>> ----------------------------------cut----------------------------------
>> => usb start
>> starting USB...
>> USB0:   data abort
>> pc : [<fff63d22>]          lr : [<fff63b63>]
>> reloc pc : [<8081cd22>]    lr : [<8081cb63>]
>> sp : fdf42d08  ip : fff9e040     fp : fdf42d50
>> r10: fff8a998  r9 : fdf42ef0     r8 : 00000000
>> r7 : fdf42d28  r6 : fdf42d2c     r5 : fffa5c00  r4 : 00000000
>> r3 : 4a020000  r2 : 00000000     r1 : fdf42e78  r0 : fffa5c00
>> Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
>> Resetting CPU ...
>>
>> resetting ...
>> ----------------------------------cut----------------------------------
>>
>> Fix by adding the CL-SOM-AM57x target to the XHCI registers base address
>> ifdef'ery.
>> A better fix should be based on a SOC family defines (currently
>> missing).
>
> Can you please go add the Kconfig symbols that would be the better
> solution please?  Thanks!
>
The SOC family symbol CONFIG_AM57XX was removed by the commit 3891a54: 
"ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX".
Maybe the symbol should be reintroduced just for the XHCI registers 
section?

-- 
Thanks,
Uri