[U-Boot] [PATCH V2 06/20] imx: mx7ulp: handle all the lpuarts in get_lpuart_clk

[Stefano Babic]

On 27/12/2016 11:04, Peng Fan wrote:
> Add handle the lpuarts in get_lpuart_clk.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> 
> V2:
>  None
> 
>  arch/arm/cpu/armv7/mx7ulp/clock.c | 34 +++++++++++++++++++++++++++++++---
>  1 file changed, 31 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx7ulp/clock.c b/arch/arm/cpu/armv7/mx7ulp/clock.c
> index 534f632..0c34d88 100644
> --- a/arch/arm/cpu/armv7/mx7ulp/clock.c
> +++ b/arch/arm/cpu/armv7/mx7ulp/clock.c
> @@ -42,7 +42,35 @@ static u32 get_ipg_clk(void)
>  
>  u32 get_lpuart_clk(void)
>  {
> -	return pcc_clock_get_rate(PER_CLK_LPUART4);
> +	int index = 0;
> +
> +	const u32 lpuart_array[] = {
> +		LPUART0_RBASE,
> +		LPUART1_RBASE,
> +		LPUART2_RBASE,
> +		LPUART3_RBASE,
> +		LPUART4_RBASE,
> +		LPUART5_RBASE,
> +		LPUART6_RBASE,
> +		LPUART7_RBASE,
> +	};
> +
> +	const enum pcc_clk lpuart_pcc_clks[] = {
> +		PER_CLK_LPUART4,
> +		PER_CLK_LPUART5,
> +		PER_CLK_LPUART6,
> +		PER_CLK_LPUART7,
> +	};
> +
> +	for (index = 0; index < 8; index++) {
> +		if (lpuart_array[index] == LPUART_BASE)
> +			break;
> +	}
> +
> +	if (index < 4 || index > 7)
> +		return 0;
> +
> +	return pcc_clock_get_rate(lpuart_pcc_clks[index - 4]);
>  }
>  
>  unsigned int mxc_get_clock(enum mxc_clock clk)
> @@ -59,7 +87,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
>  	case MXC_I2C_CLK:
>  		return pcc_clock_get_rate(PER_CLK_LPI2C4);
>  	case MXC_UART_CLK:
> -		return pcc_clock_get_rate(PER_CLK_LPUART4);
> +		return get_lpuart_clk();
>  	case MXC_ESDHC_CLK:
>  		return pcc_clock_get_rate(PER_CLK_USDHC0);
>  	case MXC_ESDHC2_CLK:
> @@ -264,7 +292,7 @@ int do_mx7_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>  
>  	printf("CORE       %8d kHz\n", scg_clk_get_rate(SCG_CORE_CLK) / 1000);
>  	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
> -	printf("UART       %8d kHz\n", pcc_clock_get_rate(PER_CLK_LPUART4) / 1000);
> +	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
>  	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
>  	printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
>  	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
> 

As far as I understand, you can better squash this patch with 4/20

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================