[U-Boot] [PATCH v3 01/10] serial: stm32f7: add device tree support

[Vikas Manocha]

This patch adds device tree support for stm32f7 serial driver & removes serial
platform data structure.

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---

Changed in v3: None
Changed in v2: None

 board/st/stm32f746-disco/stm32f746-disco.c | 10 ----------
 drivers/serial/serial_stm32x7.c            | 24 ++++++++++++++++++++++++
 2 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index 7ed7bf7..72212f4 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -267,16 +267,6 @@ out:
 	return rv;
 }
 
-static const struct stm32x7_serial_platdata serial_platdata = {
-	.base = (struct stm32_usart *)USART1_BASE,
-	.clock = CONFIG_SYS_CLK_FREQ,
-};
-
-U_BOOT_DEVICE(stm32x7_serials) = {
-	.name = "serial_stm32x7",
-	.platdata = &serial_platdata,
-};
-
 #ifdef CONFIG_ETH_DESIGNWARE
 const struct stm32_gpio_ctl gpio_ctl_eth = {
 	.mode = STM32_GPIO_MODE_AF,
diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
index 592c0bd..2e6c676 100644
--- a/drivers/serial/serial_stm32x7.c
+++ b/drivers/serial/serial_stm32x7.c
@@ -81,6 +81,27 @@ static int stm32_serial_probe(struct udevice *dev)
 	return 0;
 }
 
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct udevice_id stm32_serial_id[] = {
+	{.compatible = "st,stm32-usart"},
+	{.compatible = "st,stm32-uart"},
+	{}
+};
+
+static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+	fdt_addr_t addr;
+
+	addr = dev_get_addr(dev);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	plat->base = (struct stm32_usart *)addr;
+	return 0;
+}
+#endif
+
 static const struct dm_serial_ops stm32_serial_ops = {
 	.putc = stm32_serial_putc,
 	.pending = stm32_serial_pending,
@@ -91,6 +112,9 @@ static const struct dm_serial_ops stm32_serial_ops = {
 U_BOOT_DRIVER(serial_stm32) = {
 	.name = "serial_stm32x7",
 	.id = UCLASS_SERIAL,
+	.of_match = of_match_ptr(stm32_serial_id),
+	.ofdata_to_platdata = of_match_ptr(stm32_serial_ofdata_to_platdata),
+	.platdata_auto_alloc_size = sizeof(struct stm32x7_serial_platdata),
 	.ops = &stm32_serial_ops,
 	.probe = stm32_serial_probe,
 	.flags = DM_FLAG_PRE_RELOC,
-- 
1.9.1