[U-Boot] [PATCH v1 0/6] Introduce DCU support for Vybrid

[maitysanchayan at gmail.com]

Ping?

On 17-02-06 13:00:28, Sanchayan Maity wrote:
> Hello,
> 
> This patchset adds support for the Freescale/NXP Display
> Controller Unit (DCU4) found on the LS1021A and Vybrid
> SoC.
> 
> Patch series is based on top of latest u-boot master.
> 
> First patch in the series renames existing CONFIG_FSL_DCU_FB
> to CONFIG_VIDEO_FSL_DCU_FB and then converts it to Kconfig.
> All board defconfigs affected by this patch have been compile
> tested.
> 
> Patch 2-5 introduce incremental changes for supporting DCU
> on Vybrid.
> 
> Patch 6 in the series adds DCU support to Vybrid and has been
> tested on Toradex Colibri VF61 module.
> 
> Will appreciate it if the maintainers or users of LS1021 SoC
> can test this to check and report regressions if any.
> 
> Thanks & Regards,
> Sanchayan.
> 
> Sanchayan Maity (1):
>   Convert CONFIG_FSL_DCU_FB to Kconfig
> 
> Stefan Agner (5):
>   video: fsl_dcu_fb: fix framebuffer to the end of memory
>   video: fsl_dcu_fb: Enable pixel clock after initialization
>   video: fsl_dcu_fb: Update DCU layers for Vybrid
>   video: fsl_dcu_fb: add additional modes for DCU
>   board: toradex: colibri_vf: Add DCU support for Colibri Vybrid
> 
>  arch/arm/cpu/armv7/ls102xa/soc.c                   |   2 +-
>  arch/arm/include/asm/arch-ls102xa/config.h         |   1 +
>  arch/arm/include/asm/arch-vf610/crm_regs.h         |  14 +++
>  arch/arm/include/asm/arch-vf610/imx-regs.h         |   2 +
>  arch/arm/include/asm/arch-vf610/iomux-vf610.h      |  31 ++++++
>  arch/arm/include/asm/imx-common/iomux-v3.h         |   3 +
>  board/freescale/ls1021aiot/Makefile                |   2 +-
>  board/freescale/ls1021aqds/Makefile                |   2 +-
>  board/freescale/ls1021atwr/Makefile                |   2 +-
>  board/toradex/colibri_vf/Makefile                  |   1 +
>  board/toradex/colibri_vf/colibri_vf.c              |  76 ++++++++++---
>  board/toradex/colibri_vf/dcu.c                     |  38 +++++++
>  configs/colibri_vf_defconfig                       |   4 +
>  configs/ls1021aqds_ddr4_nor_defconfig              |   1 +
>  configs/ls1021aqds_ddr4_nor_lpuart_defconfig       |   1 +
>  configs/ls1021aqds_nand_defconfig                  |   1 +
>  configs/ls1021aqds_nor_SECURE_BOOT_defconfig       |   1 +
>  configs/ls1021aqds_nor_defconfig                   |   1 +
>  configs/ls1021aqds_nor_lpuart_defconfig            |   1 +
>  configs/ls1021aqds_qspi_defconfig                  |   1 +
>  configs/ls1021aqds_sdcard_ifc_defconfig            |   1 +
>  configs/ls1021aqds_sdcard_qspi_defconfig           |   1 +
>  configs/ls1021atwr_nor_SECURE_BOOT_defconfig       |   1 +
>  configs/ls1021atwr_nor_defconfig                   |   1 +
>  configs/ls1021atwr_nor_lpuart_defconfig            |   1 +
>  configs/ls1021atwr_qspi_defconfig                  |   1 +
>  .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig    |   1 +
>  configs/ls1021atwr_sdcard_ifc_defconfig            |   1 +
>  configs/ls1021atwr_sdcard_qspi_defconfig           |   1 +
>  drivers/video/Kconfig                              |  15 +++
>  drivers/video/Makefile                             |   2 +-
>  drivers/video/fsl_dcu_fb.c                         | 124 ++++++++++++++++++---
>  include/configs/colibri_vf.h                       |  18 ++-
>  include/configs/ls1021aqds.h                       |   4 +-
>  include/configs/ls1021atwr.h                       |   4 +-
>  include/fsl_dcu_fb.h                               |   1 +
>  scripts/config_whitelist.txt                       |   1 -
>  37 files changed, 318 insertions(+), 45 deletions(-)
>  create mode 100644 board/toradex/colibri_vf/dcu.c
> 
> -- 
> 2.11.1
>