[U-Boot] [PATCH 7/7] config: add support for evb-rk3328

[Kever Yang]

Enable board config for evb-rk3328.
SDcard and eMMC boot is OK in this initial version,
USB and EMAC function is not available now, will comes later.

Signed-off-by: William Zhang <william.zhang at rock-chips.com>
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 configs/evb-rk3328_defconfig | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 configs/evb-rk3328_defconfig

diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
new file mode 100644
index 0000000..df22105
--- /dev/null
+++ b/configs/evb-rk3328_defconfig
@@ -0,0 +1,36 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
+CONFIG_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_ROCKCHIP_RK3328_PINCTRL=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
-- 
1.9.1