[U-Boot] [PATCH v4 02/20] clk: rk3288: limit gpll and cpll init to SPL build

Heiko Stuebner heiko at sntech.de
Sat Feb 18 18:46:22 UTC 2017


The gpll and cpll init values are only used in rk_clk_init in the SPL
and therefore produce compile time warnings in regular uboot builds.
Fix that with an #ifdef.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 drivers/clk/rockchip/clk_rk3288.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c
index d15504c3aa..78356766a7 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -131,8 +131,10 @@ enum {
 
 /* Keep divisors as low as possible to reduce jitter and power usage */
 static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
+#ifdef CONFIG_SPL_BUILD
 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
+#endif
 
 static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,
 			 const struct pll_div *div)
-- 
2.11.0



More information about the U-Boot mailing list