[U-Boot] [PATCH v4 18/20] rockchip: rk3188: Add main, spl and tpl boards
Heiko Stuebner
heiko at sntech.de
Sat Feb 18 18:46:38 UTC 2017
The rk3188 needs 3 U-Boot stages: a tpl living in 1KB of sram, a spl
the resides in the rest of the sram and loads the regular U-Boot living
in regular ram.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Tested-by: Kever Yang <kever.yang at rock-chips.com>
---
arch/arm/mach-rockchip/Makefile | 7 +-
arch/arm/mach-rockchip/rk3188-board-spl.c | 218 ++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rk3188-board-tpl.c | 86 ++++++++++++
arch/arm/mach-rockchip/rk3188-board.c | 71 ++++++++++
4 files changed, 381 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-rockchip/rk3188-board-spl.c
create mode 100644 arch/arm/mach-rockchip/rk3188-board-tpl.c
create mode 100644 arch/arm/mach-rockchip/rk3188-board.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 2be7e14e3e..7b8abc2266 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -4,11 +4,16 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o
+obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o
+else ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
+obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o
else
+obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o
endif
diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c
new file mode 100644
index 0000000000..f93feae0c9
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3188-board-spl.c
@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <led.h>
+#include <malloc.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/bootrom.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3188.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/timer.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <dm/test.h>
+#include <dm/util.h>
+#include <power/regulator.h>
+#include <syscon.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ const void *blob = gd->fdt_blob;
+ struct udevice *dev;
+ const char *bootdev;
+ int node;
+ int ret;
+
+ bootdev = fdtdec_get_config_string(blob, "u-boot,boot0");
+ debug("Boot device %s\n", bootdev);
+ if (!bootdev)
+ goto fallback;
+
+ node = fdt_path_offset(blob, bootdev);
+ if (node < 0) {
+ debug("node=%d\n", node);
+ goto fallback;
+ }
+ ret = device_get_global_by_of_offset(node, &dev);
+ if (ret) {
+ debug("device at node %s/%d not found: %d\n", bootdev, node,
+ ret);
+ goto fallback;
+ }
+ debug("Found device %s\n", dev->name);
+ switch (device_get_uclass_id(dev)) {
+ case UCLASS_SPI_FLASH:
+ return BOOT_DEVICE_SPI;
+ case UCLASS_MMC:
+ return BOOT_DEVICE_MMC1;
+ default:
+ debug("Booting from device uclass '%s' not supported\n",
+ dev_get_uclass_name(dev));
+ }
+
+fallback:
+#endif
+ return BOOT_DEVICE_MMC1;
+}
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+ return MMCSD_MODE_RAW;
+}
+
+void board_init_f(ulong dummy)
+{
+ struct udevice *pinctrl, *dev;
+ struct rk3188_pmu *pmu;
+ int ret;
+
+ /* Example code showing how to enable the debug UART on RK3188 */
+#ifdef EARLY_UART
+#include <asm/arch/grf_rk3188.h>
+ /* Enable early UART on the RK3188 */
+#define GRF_BASE 0x20008000
+ struct rk3188_grf * const grf = (void *)GRF_BASE;
+
+ rk_clrsetreg(&grf->gpio1b_iomux,
+ GPIO1B1_MASK << GPIO1B1_SHIFT |
+ GPIO1B0_MASK << GPIO1B0_SHIFT,
+ GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
+ GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
+ /*
+ * Debug UART can be used from here if required:
+ *
+ * debug_uart_init();
+ * printch('a');
+ * printhex8(0x1234);
+ * printascii("string");
+ */
+ debug_uart_init();
+ printch('s');
+ printch('p');
+ printch('l');
+ printch('\n');
+#endif
+
+ ret = spl_init();
+ if (ret) {
+ debug("spl_init() failed: %d\n", ret);
+ hang();
+ }
+
+ rockchip_timer_init();
+
+ ret = rockchip_get_clk(&dev);
+ if (ret) {
+ debug("CLK init failed: %d\n", ret);
+ return;
+ }
+
+ /*
+ * Recover the bootrom's stackpointer.
+ * For whatever reason needs to run after rockchip_get_clk.
+ */
+ pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
+ if (IS_ERR(pmu))
+ error("pmu syscon returned %ld\n", PTR_ERR(pmu));
+ SAVE_SP_ADDR = readl(&pmu->sys_reg[2]);
+
+ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+ if (ret) {
+ debug("Pinctrl init failed: %d\n", ret);
+ return;
+ }
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return;
+ }
+
+#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
+ back_to_bootrom();
+#endif
+}
+
+static int setup_led(void)
+{
+#ifdef CONFIG_SPL_LED
+ struct udevice *dev;
+ char *led_name;
+ int ret;
+
+ led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led");
+ if (!led_name)
+ return 0;
+ ret = led_get_by_label(led_name, &dev);
+ if (ret) {
+ debug("%s: get=%d\n", __func__, ret);
+ return ret;
+ }
+ ret = led_set_on(dev, 1);
+ if (ret)
+ return ret;
+#endif
+
+ return 0;
+}
+
+void spl_board_init(void)
+{
+ struct udevice *pinctrl;
+ int ret;
+
+ ret = setup_led();
+ if (ret) {
+ debug("LED ret=%d\n", ret);
+ hang();
+ }
+
+ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+ if (ret) {
+ debug("%s: Cannot find pinctrl device\n", __func__);
+ goto err;
+ }
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
+ if (ret) {
+ debug("%s: Failed to set up SD card\n", __func__);
+ goto err;
+ }
+#endif
+
+ /* Enable debug UART */
+ ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
+ if (ret) {
+ debug("%s: Failed to set up console UART\n", __func__);
+ goto err;
+ }
+
+ preloader_console_init();
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+ back_to_bootrom();
+#endif
+ return;
+
+err:
+ printf("spl_board_init: Error %d\n", ret);
+
+ /* No way to report error here */
+ hang();
+}
diff --git a/arch/arm/mach-rockchip/rk3188-board-tpl.c b/arch/arm/mach-rockchip/rk3188-board-tpl.c
new file mode 100644
index 0000000000..442bfe7aa7
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3188-board-tpl.c
@@ -0,0 +1,86 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/bootrom.h>
+#include <asm/arch/pmu_rk3188.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* track how often we were entered */
+static int rk3188_num_entries __attribute__ ((section(".data")));
+
+#define PMU_BASE 0x20004000
+#define TPL_ENTRY 0x10080C00
+
+static void jump_to_spl(void)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+
+ struct rk3188_pmu * const pmu = (void *)PMU_BASE;
+ image_entry_noargs_t tpl_entry =
+ (image_entry_noargs_t)(unsigned long)TPL_ENTRY;
+
+ /* Store the SAVE_SP_ADDR in a location shared with TPL. */
+ writel(SAVE_SP_ADDR, &pmu->sys_reg[2]);
+ tpl_entry();
+}
+
+void board_init_f(ulong dummy)
+{
+ /* Example code showing how to enable the debug UART on RK3188 */
+#ifdef EARLY_UART
+#include <asm/arch/grf_rk3188.h>
+ /* Enable early UART on the RK3188 */
+#define GRF_BASE 0x20008000
+ struct rk3188_grf * const grf = (void *)GRF_BASE;
+
+ rk_clrsetreg(&grf->gpio1b_iomux,
+ GPIO1B1_MASK << GPIO1B1_SHIFT |
+ GPIO1B0_MASK << GPIO1B0_SHIFT,
+ GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
+ GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
+ /*
+ * Debug UART can be used from here if required:
+ *
+ * debug_uart_init();
+ * printch('a');
+ * printhex8(0x1234);
+ * printascii("string");
+ */
+ debug_uart_init();
+
+ printch('t');
+ printch('p');
+ printch('l');
+ printch('-');
+ printch(rk3188_num_entries + 1 + '0');
+ printch('\n');
+#endif
+
+ rk3188_num_entries++;
+
+ if (rk3188_num_entries == 1) {
+ /*
+ * The original loader did some very basic integrity
+ * checking at this point, but the remaining few bytes
+ * could be used for any improvement making sense
+ * really early on.
+ */
+
+ back_to_bootrom();
+ } else {
+ /*
+ * TPL part of the loader should now wait for us
+ * at offset 0xC00 in the sram. Should never return
+ * from there.
+ */
+ jump_to_spl();
+ }
+}
diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c
new file mode 100644
index 0000000000..16f38559af
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3188-board.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3288.h>
+#include <asm/arch/boot_mode.h>
+#include <asm/gpio.h>
+#include <dm/pinctrl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM)
+ struct udevice *pinctrl;
+ int ret;
+
+ /*
+ * We need to implement sdcard iomux here for the further
+ * initialization, otherwise, it'll hit sdcard command sending
+ * timeout exception.
+ */
+ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+ if (ret) {
+ debug("%s: Cannot find pinctrl device\n", __func__);
+ goto err;
+ }
+ ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
+ if (ret) {
+ debug("%s: Failed to set up SD card\n", __func__);
+ goto err;
+ }
+
+ return 0;
+err:
+ printf("board_init: Error %d\n", ret);
+
+ /* No way to report error here */
+ hang();
+
+ return -1;
+#else
+ return 0;
+#endif
+}
+
+int dram_init(void)
+{
+ /* FIXME: read back ram size from sys_reg2 */
+ gd->ram_size = 0x40000000;
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
--
2.11.0
More information about the U-Boot
mailing list