[U-Boot] [PATCH 3/8] arm: socfpga: A5 SoCDK use environment in common header

Dalon Westergreen dwesterg at gmail.com
Sat Feb 18 20:51:43 UTC 2017


This removes the default environment from the A5 socdk headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

Add support to boot from the custom a2 type partition.

Change default devicetree name to match devicetree name in
upstream kernel source.

Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>

a5
---
 configs/socfpga_arria5_defconfig       |  3 +++
 include/configs/socfpga_arria5_socdk.h | 31 -------------------------------
 2 files changed, 3 insertions(+), 31 deletions(-)

diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig
index 43c51fe..c7d7f93 100644
--- a/configs/socfpga_arria5_defconfig
+++ b/configs/socfpga_arria5_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
+CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
@@ -64,3 +65,5 @@ CONFIG_G_DNL_MANUFACTURER="altera"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USE_TINY_PRINTF=y
+ONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h
index 9b1f753..7222505 100644
--- a/include/configs/socfpga_arria5_socdk.h
+++ b/include/configs/socfpga_arria5_socdk.h
@@ -17,12 +17,6 @@
 
 /* Booting Linux */
 #define CONFIG_BOOTFILE		"zImage"
-#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_BOOTCOMMAND	"run ramboot"
-#else
-#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
-#endif
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
@@ -34,31 +28,6 @@
 
 #define CONFIG_ENV_IS_IN_MMC
 
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"verify=n\0" \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"bootimage=zImage\0" \
-	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
-		"ubifsload ${loadaddr} /boot/${bootimage} && " \
-		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-- 
2.7.4



More information about the U-Boot mailing list