[U-Boot] [PATCH v2 1/8] arm: socfpga: Add distro boot to socfpga common header
Marek Vasut
marex at denx.de
Sun Feb 19 02:28:19 UTC 2017
On 02/19/2017 02:52 AM, Dalon Westergreen wrote:
> This adds a common environment and support for distro boot
> in the common socfpga header.
>
> Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>
>
> --
> Changes in V2:
> - Remove unneeded CONFIG_BOOTFILE and fdt_addr
> - cleanup spacing in MMC env size
> ---
> include/configs/socfpga_common.h | 53 +++++++++++++++++++++++++++++++++++++---
> 1 file changed, 49 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index 582b04a..e76bee0 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -67,6 +67,9 @@
> #define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
> #endif
>
> +#define CONFIG_CMD_PXE
> +#define CONFIG_MENU
> +
> /*
> * Cache
> */
> @@ -245,13 +248,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> * U-Boot environment
> */
> #if !defined(CONFIG_ENV_SIZE)
> -#define CONFIG_ENV_SIZE 4096
> +#define CONFIG_ENV_SIZE (8*1024)
You forgot to fix the space here ;-/
> #endif
>
> /* Environment for SDMMC boot */
> #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
> -#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
> -#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
> +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
> +#define CONFIG_ENV_OFFSET (34 * 512) /* just after the GPT */
But you fixed it here.
> #endif
>
> /* Environment for QSPI boot */
> @@ -308,8 +311,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> /* SPL SDMMC boot support */
> #ifdef CONFIG_SPL_MMC_SUPPORT
> #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
> -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
> #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
> +#endif
> +#else
> +#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
> #endif
> #endif
>
> @@ -331,4 +338,42 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> */
> #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
>
> +/* Extra Environment */
> +#ifndef CONFIG_SPL_BUILD
> +#include <config_distro_defaults.h>
> +
> +#ifdef CONFIG_CMD_PXE
> +#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
> +#else
> +#define BOOT_TARGET_DEVICES_PXE(func)
> +#endif
> +
> +#ifdef CONFIG_CMD_MMC
> +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
> +#else
> +#define BOOT_TARGET_DEVICES_MMC(func)
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + BOOT_TARGET_DEVICES_MMC(func) \
> + BOOT_TARGET_DEVICES_PXE(func) \
> + func(DHCP, dhcp, na)
> +
> +#include <config_distro_bootcmd.h>
> +
> +#ifndef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "verify=n\0" \
This is still here ...
> + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
> + "bootm_size=0xa000000\0" \
> + "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
> + "fdt_addr_r=0x02000000\0" \
> + "scriptaddr=0x02100000\0" \
> + "pxefile_addr_r=0x02200000\0" \
> + "ramdisk_addr_r=0x02300000\0" \
> + BOOTENV
> +
> +#endif
> +#endif
> +
> #endif /* __CONFIG_SOCFPGA_COMMON_H__ */
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list