[U-Boot] [PATCH v3 07/15] i.MX6UL: isiot: Add modeboot env via board_late_init

Stefano Babic sbabic at denx.de
Sun Feb 19 15:52:27 UTC 2017


On 02/02/2017 15:56, Jagan Teki wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
> 
> Add runtime, modeboot env which is setting mmcboot, or
> nandboot based on the bootdevice so-that conditional
> macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should
> be avoided in config files.
> 
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Matteo Lisi <matteo.lisi at engicam.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  board/engicam/isiotmx6ul/isiotmx6ul.c | 21 ++++++++++++++++++++
>  configs/imx6ul_isiot_emmc_defconfig   |  1 +
>  configs/imx6ul_isiot_mmc_defconfig    |  1 +
>  configs/imx6ul_isiot_nand_defconfig   |  1 +
>  include/configs/imx6ul_isiot.h        | 36 ++++++++++++++++-------------------
>  5 files changed, 40 insertions(+), 20 deletions(-)
> 
> diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
> index 1b5f74e..fa91956 100644
> --- a/board/engicam/isiotmx6ul/isiotmx6ul.c
> +++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
> @@ -103,6 +103,27 @@ static void setup_gpmi_nand(void)
>  }
>  #endif /* CONFIG_NAND_MXS */
>  
> +int board_late_init(void)
> +{
> +	switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
> +			IMX6_BMODE_SHIFT) {
> +	case IMX6_BMODE_SD:
> +	case IMX6_BMODE_ESD:
> +	case IMX6_BMODE_MMC:
> +	case IMX6_BMODE_EMMC:
> +		setenv("modeboot", "mmcboot");
> +		break;
> +	case IMX6_BMODE_NAND:
> +		setenv("modeboot", "nandboot");
> +		break;
> +	default:
> +		setenv("modeboot", "");
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>  int board_init(void)
>  {
>  	/* Address of boot parameters */
> diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig
> index 94fe808..4c3664f 100644
> --- a/configs/imx6ul_isiot_emmc_defconfig
> +++ b/configs/imx6ul_isiot_emmc_defconfig
> @@ -37,3 +37,4 @@ CONFIG_PINCTRL=y
>  CONFIG_PINCTRL_IMX6=y
>  CONFIG_MXC_UART=y
>  CONFIG_IMX_THERMAL=y
> +CONFIG_BOARD_LATE_INIT=y
> diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig
> index 8ecdd8e..ea2d378 100644
> --- a/configs/imx6ul_isiot_mmc_defconfig
> +++ b/configs/imx6ul_isiot_mmc_defconfig
> @@ -39,3 +39,4 @@ CONFIG_PINCTRL=y
>  CONFIG_PINCTRL_IMX6=y
>  CONFIG_MXC_UART=y
>  CONFIG_IMX_THERMAL=y
> +CONFIG_BOARD_LATE_INIT=y
> diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig
> index 6f1a054..f02a2ac 100644
> --- a/configs/imx6ul_isiot_nand_defconfig
> +++ b/configs/imx6ul_isiot_nand_defconfig
> @@ -40,3 +40,4 @@ CONFIG_PINCTRL_IMX6=y
>  CONFIG_SYS_I2C_MXC=y
>  CONFIG_MXC_UART=y
>  CONFIG_IMX_THERMAL=y
> +CONFIG_BOARD_LATE_INIT=y
> diff --git a/include/configs/imx6ul_isiot.h b/include/configs/imx6ul_isiot.h
> index 1b0e436..7258fed 100644
> --- a/include/configs/imx6ul_isiot.h
> +++ b/include/configs/imx6ul_isiot.h
> @@ -64,8 +64,7 @@
>  	"fitboot=echo Booting FIT image from mmc ...; " \
>  		"run mmcargs; " \
>  		"bootm ${loadaddr}\0" \
> -	"mmcboot=echo Booting from mmc ...; " \
> -		"run mmcargs; " \
> +	"_mmcboot=run mmcargs; " \
>  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
>  			"if run loadfdt; then " \
>  				"bootm ${loadaddr} - ${fdt_addr}; " \
> @@ -79,6 +78,20 @@
>  		"else " \
>  			"bootm; " \
>  		"fi\0" \
> +	"mmcboot=echo Booting from mmc ...; " \
> +		"if mmc rescan; then " \
> +			"if run loadbootscript; then " \
> +				"run bootscript; " \
> +			"else " \
> +				"if run loadfit; then " \
> +					"run fitboot; " \
> +				"else " \
> +					"if run loadimage; then " \
> +						"run _mmcboot; " \
> +					"fi; " \
> +				"fi; " \
> +			"fi; " \
> +		"fi\0" \
>  	"nandboot=echo Booting from nand ...; " \
>  		"if mtdparts; then " \
>  			"echo Starting nand boot ...; " \
> @@ -90,24 +103,7 @@
>  		"nand read ${fdt_addr} dtb 0x100000; " \
>  		"bootm ${loadaddr} - ${fdt_addr}\0"
>  
> -#ifdef CONFIG_NAND_MXS
> -# define CONFIG_BOOTCOMMAND		"run nandboot"
> -#else
> -# define CONFIG_BOOTCOMMAND \
> -	"if mmc rescan; then " \
> -		"if run loadbootscript; then " \
> -			"run bootscript; " \
> -		"else " \
> -			"if run loadfit; then " \
> -				"run fitboot; " \
> -			"else " \
> -				"if run loadimage; then " \
> -					"run mmcboot; " \
> -				"fi; " \
> -			"fi; " \
> -		"fi; " \
> -	"fi"
> -#endif
> +#define CONFIG_BOOTCOMMAND		"run $modeboot"
>  
>  /* Miscellaneous configurable options */
>  #define CONFIG_SYS_MEMTEST_START	0x80000000
> 

Reviewed by : Stefano Babic |sbabic at denx.de>

Best regards,
Stefano Babic

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list