[U-Boot] [PATCH v3 10/15] arm: dts: imx6qdl-icore-rqs: Add eMMC node

[Stefano Babic]

On 02/02/2017 15:56, Jagan Teki wrote:
> Add usdhc4 node, which is eMMC for Engicam i.CoreM6 RQS modules.
> 
> eMMC Log:
> --------
> icorem6qdl-rqs> mmc dev 1
> switch to partitions #0, OK
> mmc1(part 0) is current device
> icorem6qdl-rqs> mmcinfo
> Device: FSL_SDHC
> Manufacturer ID: fe
> OEM: 14e
> Name: MMC04
> Tran Speed: 52000000
> Rd Block Len: 512
> MMC version 4.4.1
> High Capacity: Yes
> Capacity: 3.5 GiB
> Bus Width: 4-bit
> Erase Group Size: 512 KiB
> HC WP Group Size: 4 MiB
> User Capacity: 3.5 GiB
> Boot Capacity: 16 MiB ENH
> RPMB Capacity: 128 KiB ENH
> 
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Matteo Lisi <matteo.lisi at engicam.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
> index 750229b..8b9d5b4 100644
> --- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
> +++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
> @@ -107,6 +107,13 @@
>  	status = "okay";
>  };
>  
> +&usdhc4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc4>;
> +	no-1-8-v;
> +	status = "okay";
> +};
> +
>  &iomuxc {
>  	pinctrl_enet: enetgrp {
>  		fsl,pins = <
> @@ -167,4 +174,19 @@
>  			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
>  		>;
>  	};
> +
> +	pinctrl_usdhc4: usdhc4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
> +			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
> +			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
> +			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
> +			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
> +			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
> +			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
> +			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
> +			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
> +			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
> +		>;
> +	};
>  };
> 
Reviewed by : Stefano Babic |sbabic at denx.de>

Best regards,
Stefano Babic


-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================