[U-Boot] [PATCH v4 2/3] mmc: meson: add MMC driver for Meson GX (S905)
Jaehoon Chung
jh80.chung at samsung.com
Sun Feb 19 22:00:05 UTC 2017
On 02/03/2017 04:03 AM, Carlo Caione wrote:
> This driver implements MMC support on Meson GX (S905) based systems.
> It's based on Carlo Caione's work, changes:
> - BLK support added
> - general refactoring
>
> Signed-off-by: Carlo Caione <carlo at caione.org>
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
> v4:
> - addressed review comments
> - general refactoring
> - remove config symbol MMC_MESON_GX_SD_PORT
> - changed From: to Carlo Caione
> - changed copyright year to 2016
> ---
> arch/arm/include/asm/arch-meson/sd_emmc.h | 89 +++++++++
> drivers/mmc/Kconfig | 6 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/meson_gx_mmc.c | 291 ++++++++++++++++++++++++++++++
> 4 files changed, 387 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-meson/sd_emmc.h
> create mode 100644 drivers/mmc/meson_gx_mmc.c
>
> diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
> new file mode 100644
> index 0000000..a09e034
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
> @@ -0,0 +1,89 @@
> +/*
> + * (C) Copyright 2016 Carlo Caione <carlo at caione.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __SD_EMMC_H__
> +#define __SD_EMMC_H__
> +
> +#include <mmc.h>
> +
> +#define SDIO_PORT_A 0
> +#define SDIO_PORT_B 1
> +#define SDIO_PORT_C 2
> +
> +#define SD_EMMC_CLKSRC_24M 24000000 /* 24 MHz */
> +#define SD_EMMC_CLKSRC_DIV2 1000000000 /* 1 GHz */
> +
> +#define MESON_SD_EMMC_CLOCK 0x00
> +#define CLK_MAX_DIV 63
> +#define CLK_SRC_24M (0 << 6)
> +#define CLK_SRC_DIV2 (1 << 6)
> +#define CLK_CO_PHASE_000 (0 << 8)
> +#define CLK_CO_PHASE_090 (1 << 8)
> +#define CLK_CO_PHASE_180 (2 << 8)
> +#define CLK_CO_PHASE_270 (3 << 8)
> +#define CLK_TX_PHASE_000 (0 << 10)
> +#define CLK_TX_PHASE_090 (1 << 10)
> +#define CLK_TX_PHASE_180 (2 << 10)
> +#define CLK_TX_PHASE_270 (3 << 10)
> +#define CLK_ALWAYS_ON BIT(24)
> +
> +#define MESON_SD_EMMC_CFG 0x44
> +#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
> +#define CFG_BUS_WIDTH_1 0
> +#define CFG_BUS_WIDTH_4 1
> +#define CFG_BUS_WIDTH_8 2
> +#define CFG_BL_LEN_MASK GENMASK(7, 4)
> +#define CFG_BL_LEN_SHIFT 4
> +#define CFG_BL_LEN_512 (9 << 4)
> +#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
> +#define CFG_RESP_TIMEOUT_256 (8 << 8)
> +#define CFG_RC_CC_MASK GENMASK(15, 12)
> +#define CFG_RC_CC_16 (4 << 12)
> +#define CFG_SDCLK_ALWAYS_ON BIT(18)
> +#define CFG_AUTO_CLK BIT(23)
> +
> +#define MESON_SD_EMMC_STATUS 0x48
> +#define STATUS_MASK GENMASK(15, 0)
> +#define STATUS_ERR_MASK GENMASK(12, 0)
> +#define STATUS_RXD_ERR_MASK GENMASK(7, 0)
> +#define STATUS_TXD_ERR BIT(8)
> +#define STATUS_DESC_ERR BIT(9)
> +#define STATUS_RESP_ERR BIT(10)
> +#define STATUS_RESP_TIMEOUT BIT(11)
> +#define STATUS_DESC_TIMEOUT BIT(12)
> +#define STATUS_END_OF_CHAIN BIT(13)
> +
> +#define MESON_SD_EMMC_IRQ_EN 0x4c
> +
> +#define MESON_SD_EMMC_CMD_CFG 0x50
> +#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
> +#define CMD_CFG_BLOCK_MODE BIT(9)
> +#define CMD_CFG_R1B BIT(10)
> +#define CMD_CFG_END_OF_CHAIN BIT(11)
> +#define CMD_CFG_TIMEOUT_4S (12 << 12)
> +#define CMD_CFG_NO_RESP BIT(16)
> +#define CMD_CFG_DATA_IO BIT(18)
> +#define CMD_CFG_DATA_WR BIT(19)
> +#define CMD_CFG_RESP_NOCRC BIT(20)
> +#define CMD_CFG_RESP_128 BIT(21)
> +#define CMD_CFG_CMD_INDEX_SHIFT 24
> +#define CMD_CFG_OWNER BIT(31)
> +
> +#define MESON_SD_EMMC_CMD_ARG 0x54
> +#define MESON_SD_EMMC_CMD_DAT 0x58
> +#define MESON_SD_EMMC_CMD_RSP 0x5c
> +#define MESON_SD_EMMC_CMD_RSP1 0x60
> +#define MESON_SD_EMMC_CMD_RSP2 0x64
> +#define MESON_SD_EMMC_CMD_RSP3 0x68
> +
> +struct meson_mmc_platdata {
> + struct mmc_config cfg;
> + struct mmc mmc;
> + void *regbase;
> + void *w_buf;
> +};
> +
> +#endif
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index df4913b..bc647c8 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -172,6 +172,12 @@ config ZYNQ_SDHCI
> help
> Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
>
> +config MMC_MESON_GX
> + bool "Meson GX EMMC controller support"
> + depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_MESON
Not put DM_MMC_OPS.
> + help
> + Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
> +
> config ROCKCHIP_SDHCI
> bool "Arasan SDHCI controller for Rockchip support"
> depends on DM_MMC && BLK && DM_MMC_OPS
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 6af7f79..baa6531 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -31,6 +31,7 @@ ifdef CONFIG_SUPPORT_EMMC_BOOT
> obj-$(CONFIG_GENERIC_MMC) += mmc_boot.o
> endif
> obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
> +obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o
> obj-$(CONFIG_MMC_SPI) += mmc_spi.o
> obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
> obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> new file mode 100644
> index 0000000..12d2047
> --- /dev/null
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -0,0 +1,291 @@
> +/*
> + * (C) Copyright 2016 Carlo Caione <carlo at caione.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <malloc.h>
> +#include <mmc.h>
> +#include <asm/io.h>
> +#include <asm/arch/sd_emmc.h>
> +#include <dm/device.h>
> +#include <linux/log2.h>
> +
> +static inline void *get_regbase(const struct mmc *mmc)
> +{
> + struct meson_mmc_platdata *pdata = mmc->priv;
> +
> + return pdata->regbase;
> +}
> +
> +static inline uint32_t meson_read(struct mmc *mmc, int offset)
> +{
> + return readl(get_regbase(mmc) + offset);
> +}
> +
> +static inline void meson_write(struct mmc *mmc, uint32_t val, int offset)
> +{
> + writel(val, get_regbase(mmc) + offset);
> +}
> +
> +static void meson_mmc_config_clock(struct mmc *mmc)
> +{
> + uint32_t meson_mmc_clk = 0;
> + unsigned int clk, clk_src, clk_div;
> +
> + /* 1GHz / CLK_MAX_DIV = 15,9 MHz */
> + if (mmc->clock > 16000000) {
> + clk = SD_EMMC_CLKSRC_DIV2;
> + clk_src = CLK_SRC_DIV2;
> + } else {
> + clk = SD_EMMC_CLKSRC_24M;
> + clk_src = CLK_SRC_24M;
> + }
> + clk_div = DIV_ROUND_UP(clk, mmc->clock);
> +
> + /* core clock phase */
> + meson_mmc_clk |= CLK_CO_PHASE_180;
> +
> + /* tx clock phase */
> + meson_mmc_clk |= CLK_TX_PHASE_000;
> +
> + /* clock settings */
> + meson_mmc_clk |= clk_src;
> + meson_mmc_clk |= clk_div;
> +
> + meson_write(mmc, meson_mmc_clk, MESON_SD_EMMC_CLOCK);
> +}
> +
> +static int meson_dm_mmc_set_ios(struct udevice *dev)
> +{
> + struct mmc *mmc = mmc_get_mmc_dev(dev);
> + uint32_t meson_mmc_cfg;
> +
> + meson_mmc_config_clock(mmc);
> +
> + meson_mmc_cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
> +
> + meson_mmc_cfg &= ~CFG_BUS_WIDTH_MASK;
> + if (mmc->bus_width == 1)
> + meson_mmc_cfg |= CFG_BUS_WIDTH_1;
> + else if (mmc->bus_width == 4)
> + meson_mmc_cfg |= CFG_BUS_WIDTH_4;
> + else if (mmc->bus_width == 8)
> + meson_mmc_cfg |= CFG_BUS_WIDTH_8;
> + else
> + return -EINVAL;
> +
> + /* 512 bytes block length */
> + meson_mmc_cfg &= ~CFG_BL_LEN_MASK;
> + meson_mmc_cfg |= CFG_BL_LEN_512;
> +
> + /* Response timeout 256 clk */
> + meson_mmc_cfg &= ~CFG_RESP_TIMEOUT_MASK;
> + meson_mmc_cfg |= CFG_RESP_TIMEOUT_256;
> +
> + /* Command-command gap 16 clk */
> + meson_mmc_cfg &= ~CFG_RC_CC_MASK;
> + meson_mmc_cfg |= CFG_RC_CC_16;
> +
> + meson_write(mmc, meson_mmc_cfg, MESON_SD_EMMC_CFG);
> +
> + return 0;
> +}
> +
> +static void meson_mmc_setup_cmd(struct mmc *mmc, struct mmc_data *data,
> + struct mmc_cmd *cmd)
> +{
> + uint32_t meson_mmc_cmd = 0, cfg;
> +
> + meson_mmc_cmd |= cmd->cmdidx << CMD_CFG_CMD_INDEX_SHIFT;
> +
> + if (cmd->resp_type & MMC_RSP_PRESENT) {
> + if (cmd->resp_type & MMC_RSP_136)
> + meson_mmc_cmd |= CMD_CFG_RESP_128;
> +
> + if (cmd->resp_type & MMC_RSP_BUSY)
> + meson_mmc_cmd |= CMD_CFG_R1B;
> +
> + if (!(cmd->resp_type & MMC_RSP_CRC))
> + meson_mmc_cmd |= CMD_CFG_RESP_NOCRC;
> + } else {
> + meson_mmc_cmd |= CMD_CFG_NO_RESP;
> + }
> +
> + if (data) {
> + cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
> + cfg &= ~CFG_BL_LEN_MASK;
> + cfg |= ilog2(data->blocksize) << CFG_BL_LEN_SHIFT;
> + meson_write(mmc, cfg, MESON_SD_EMMC_CFG);
> +
> + if (data->flags == MMC_DATA_WRITE)
> + meson_mmc_cmd |= CMD_CFG_DATA_WR;
> +
> + cfg = CMD_CFG_DATA_IO | CMD_CFG_BLOCK_MODE | data->blocks;
> + meson_mmc_cmd |= cfg;
This code doesn't need. You can use the below code.
cfg |= CMD_CFG_TIMEOUT_4S | ...;
> + }
> +
> + cfg = CMD_CFG_TIMEOUT_4S | CMD_CFG_OWNER | CMD_CFG_END_OF_CHAIN;
> + meson_mmc_cmd |= cfg;
> +
> + meson_write(mmc, meson_mmc_cmd, MESON_SD_EMMC_CMD_CFG);
> +}
> +
> +static void meson_mmc_setup_addr(struct mmc *mmc, struct mmc_data *data)
> +{
> + struct meson_mmc_platdata *pdata = mmc->priv;
> + unsigned int data_size;
> + uint32_t data_addr = 0;
> +
> + if (data) {
> + data_size = data->blocks * data->blocksize;
> +
> + if (data->flags == MMC_DATA_READ) {
> + data_addr = (ulong) data->dest;
> + invalidate_dcache_range(data_addr,
> + data_addr + data_size);
> + } else if (data->flags == MMC_DATA_WRITE) {
not need to use "else if", use "else"
> + pdata->w_buf = calloc(data_size, sizeof(char));
> + data_addr = (ulong) pdata->w_buf;
> + memcpy(pdata->w_buf, data->src, data_size);
> + flush_dcache_range(data_addr, data_addr + data_size);
> + }
> + }
> +
> + meson_write(mmc, data_addr, MESON_SD_EMMC_CMD_DAT);
> +}
> +
> +static void meson_mmc_read_response(struct mmc *mmc, struct mmc_cmd *cmd)
> +{
> + if (cmd->resp_type & MMC_RSP_136) {
> + cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP3);
> + cmd->response[1] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP2);
> + cmd->response[2] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP1);
> + cmd->response[3] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
> + } else {
> + cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
> + }
> +}
> +
> +static int meson_dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
> + struct mmc_data *data)
> +{
> + struct mmc *mmc = mmc_get_mmc_dev(dev);
> + struct meson_mmc_platdata *pdata = mmc->priv;
> + uint32_t status;
> + ulong start;
> + int ret = 0;
> +
> + /* max block size supported by chip is 512 byte */
> + if (data && data->blocksize > 512)
> + return -EINVAL;
> +
> + meson_mmc_setup_cmd(mmc, data, cmd);
> + meson_mmc_setup_addr(mmc, data);
> +
> + meson_write(mmc, cmd->cmdarg, MESON_SD_EMMC_CMD_ARG);
> +
> + /* use 10s timeout */
> + start = get_timer(0);
> + do {
> + status = meson_read(mmc, MESON_SD_EMMC_STATUS);
> + } while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 10000);
> +
> + if (!(status & STATUS_END_OF_CHAIN))
> + ret = -ETIMEDOUT;
> + else if (status & STATUS_RESP_TIMEOUT)
> + ret = -ETIMEDOUT;
> + else if (status & STATUS_ERR_MASK)
> + ret = -EIO;
> +
> + meson_mmc_read_response(mmc, cmd);
> +
> + if (data && data->flags == MMC_DATA_WRITE)
> + free(pdata->w_buf);
> +
> + /* reset status bits */
> + meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
> +
> + return ret;
> +}
> +
> +static const struct dm_mmc_ops meson_dm_mmc_ops = {
> + .send_cmd = meson_dm_mmc_send_cmd,
> + .set_ios = meson_dm_mmc_set_ios,
> +};
> +
> +static int meson_mmc_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
> + fdt_addr_t addr;
> +
> + addr = dev_get_addr(dev);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + pdata->regbase = (void *)addr;
> +
> + return 0;
> +}
> +
> +static int meson_mmc_probe(struct udevice *dev)
> +{
> + struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> + struct mmc *mmc = &pdata->mmc;
> + struct mmc_config *cfg = &pdata->cfg;
> + uint32_t val;
> +
> + cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
> + MMC_VDD_31_32 | MMC_VDD_165_195;
> + cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
> + MMC_MODE_HS_52MHz | MMC_MODE_HS;
> + cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
> + cfg->f_max = 100000000; /* 100 MHz */
> + cfg->b_max = 256; /* max 256 blocks */
> + cfg->name = dev->name;
> +
> + mmc->priv = pdata;
> + upriv->mmc = mmc;
> +
> + mmc_set_clock(mmc, cfg->f_min);
> +
> + /* reset all status bits */
> + meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
> +
> + /* disable interrupts */
> + meson_write(mmc, 0, MESON_SD_EMMC_IRQ_EN);
> +
> + /* enable auto clock mode */
> + val = meson_read(mmc, MESON_SD_EMMC_CFG);
> + val &= ~CFG_SDCLK_ALWAYS_ON;
> + val |= CFG_AUTO_CLK;
> + meson_write(mmc, val, MESON_SD_EMMC_CFG);
> +
> + return 0;
> +}
> +
> +int meson_mmc_bind(struct udevice *dev)
> +{
> + struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
> +
> + return mmc_bind(dev, &pdata->mmc, &pdata->cfg);
> +}
> +
> +static const struct udevice_id meson_mmc_match[] = {
> + { .compatible = "amlogic,meson-gx-mmc" },
> + { /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(meson_mmc) = {
> + .name = "meson_gx_mmc",
> + .id = UCLASS_MMC,
> + .of_match = meson_mmc_match,
> + .ops = &meson_dm_mmc_ops,
> + .probe = meson_mmc_probe,
> + .bind = meson_mmc_bind,
> + .ofdata_to_platdata = meson_mmc_ofdata_to_platdata,
> + .platdata_auto_alloc_size = sizeof(struct meson_mmc_platdata),
> +};
>
More information about the U-Boot
mailing list