[U-Boot] [PATCH v2 1/2] board: ge: bx50v3: fix AR8033 reset timing issue

[Ken Lin]

Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-reset(1ms) requirement recommended in the AR8033 datasheet

Signed-off-by: Ken Lin <yungching0725 at gmail.com>
---
Changes from v1
- Fix the missing Signed-off-by issue

 board/ge/bx50v3/bx50v3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 2fc1144cda..80b4ba1b8b 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -103,8 +103,9 @@ static void setup_iomux_enet(void)
 
 	/* Reset AR8033 PHY */
 	gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
-	udelay(500);
+	mdelay(10);
 	gpio_set_value(IMX_GPIO_NR(1, 28), 1);
+	mdelay(1);
 }
 
 static iomux_v3_cfg_t const usdhc2_pads[] = {
-- 
2.11.0