[U-Boot] [PATCH 2/3] arm: ls1043ardb: Add NAND secure boot target
Ruchika Gupta
ruchika.gupta at nxp.com
Mon Feb 20 20:37:40 UTC 2017
Add NAND secure boot target for ls1043ardb.
- Change the u-boot size defined by a macro for copying the main
U-Boot by SPL to also include the u-boot Secure Boot header size as
header is appended to u-boot image. So header will also be copied from SD to DDR.
- MACRO for CONFIG_BOOTSCRIPT_COPY_RAM is enabled to copy Bootscript from NAND to
DDR. Offsets for Bootscript on NAND and DDR have been also defined.
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai at nxp.com>
Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta at nxp.com>
---
The patchset is dependent on the following patches:
https://patchwork.ozlabs.org/patch/717614/
http://patchwork.ozlabs.org/patch/724332/
http://patchwork.ozlabs.org/patch/729932/
http://patchwork.ozlabs.org/patch/729980/
arch/arm/include/asm/fsl_secure_boot.h | 7 +++-
board/freescale/ls1043ardb/ls1043ardb.c | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 57 +++++++++++++++++++++++++++
include/config_fsl_chain_trust.h | 9 +++--
include/configs/ls1043a_common.h | 18 ++++++++-
include/configs/ls1043ardb.h | 2 +-
6 files changed, 87 insertions(+), 7 deletions(-)
create mode 100644 configs/ls1043ardb_nand_SECURE_BOOT_defconfig
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index a1474eb..2f719c0 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -74,7 +74,7 @@
/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
* Non-XIP Memory (Nand/SD)*/
#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
- defined(CONFIG_SD_BOOT)
+ defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
#define CONFIG_BOOTSCRIPT_COPY_RAM
#endif
/* The address needs to be modified according to NOR, NAND, SD and
@@ -100,6 +100,11 @@
#define CONFIG_BS_ADDR_DEVICE 0x00000940
#define CONFIG_BS_HDR_SIZE 0x00000010
#define CONFIG_BS_SIZE 0x00000008
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000
+#define CONFIG_BS_ADDR_DEVICE 0x00802000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
#else
#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
#define CONFIG_BS_ADDR_DEVICE 0x60060000
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index 0b3840d..62ab749 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -58,6 +58,7 @@ void spl_board_init(void)
out_le32(SMMU_SCR0, val);
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_NSCR0, val);
+ printf("Completed spl_board_init\n");
#endif
}
#endif
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..66c89fa
--- /dev/null
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043ARDB=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_NAND_BOOT=y
+CONFIG_SECURE_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_SPL=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
+CONFIG_SPL_RSA=y
+CONFIG_SPL_CRYPTO_SUPPORT=y
+CONFIG_SPL_HASH_SUPPORT=y
diff --git a/include/config_fsl_chain_trust.h b/include/config_fsl_chain_trust.h
index eb45e98..40d323e 100644
--- a/include/config_fsl_chain_trust.h
+++ b/include/config_fsl_chain_trust.h
@@ -81,17 +81,18 @@
"setenv bs_size " __stringify(CONFIG_BS_SIZE)";"
/* For secure boot flow, default environment used will be used */
-#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_NAND_BOOT) || \
+ defined(CONFIG_SD_BOOT)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_NAND_BOOT)
#define CONFIG_BS_COPY_CMD \
"nand read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \
"nand read $bs_ram $bs_device $bs_size ;"
-#endif /* CONFIG_RAMBOOT_NAND */
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_BS_COPY_CMD \
"mmc read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \
"mmc read $bs_ram $bs_device $bs_size ;"
-#else /* CONFIG_SD_BOOT */
+#endif
+#else
#define CONFIG_BS_COPY_CMD \
"cp.b $bs_hdr_device $bs_hdr_ram $bs_hdr_size ;" \
"cp.b $bs_device $bs_ram $bs_size ;"
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 70099f6..97282b2 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -91,7 +91,23 @@
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_MONITOR_LEN 0xa0000
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
+#endif /* ifdef CONFIG_SECURE_BOOT */
+
+#ifdef CONFIG_U_BOOT_HDR_SIZE
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
+#define CONFIG_SYS_MONITOR_LEN 0x100000
+#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
+
#endif
#if !(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 972ccb1..db782fe 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -136,7 +136,7 @@
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (1024 << 10)
#endif
/*
--
1.9.1
More information about the U-Boot
mailing list