[U-Boot] [PATCH v7 9/9] board: Add STMicroelectronics STiH410-B2260 support
patrice.chotard at st.com
patrice.chotard at st.com
Tue Feb 21 12:37:12 UTC 2017
From: Patrice Chotard <patrice.chotard at st.com>
This is a 96Board compliant board based on STiH410 SoC:
- 1GB DDR
- On-Board USB combo WiFi/Bluetooth RTL8723BU
with PCB soldered antenna
- Ethernet 1000-BaseT
- SATA
- HDMI
- 2 x USB2.0 type A
- 1 x USB2.0 type micro-AB
- SD card slot
- High speed connector (SD/I2C/USB interfaces)
- Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
v7: _ typo: replace "Slow" by "Low" in patch 9 Kconfig's help
arch/arm/mach-sti/Kconfig | 25 ++++++++++++++++
board/st/stih410-b2260/Kconfig | 19 ++++++++++++
board/st/stih410-b2260/MAINTAINERS | 7 +++++
board/st/stih410-b2260/Makefile | 8 +++++
board/st/stih410-b2260/board.c | 28 ++++++++++++++++++
configs/stih410-b2260_defconfig | 26 +++++++++++++++++
include/configs/stih410-b2260.h | 60 ++++++++++++++++++++++++++++++++++++++
7 files changed, 173 insertions(+)
create mode 100644 board/st/stih410-b2260/Kconfig
create mode 100644 board/st/stih410-b2260/MAINTAINERS
create mode 100644 board/st/stih410-b2260/Makefile
create mode 100644 board/st/stih410-b2260/board.c
create mode 100644 configs/stih410-b2260_defconfig
create mode 100644 include/configs/stih410-b2260.h
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 87c04b2..f9a583a 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -3,4 +3,29 @@ if ARCH_STI
config SYS_SOC
default "stih410"
+choice
+ prompt "STiH410 board select"
+
+config TARGET_STIH410_B2260
+ bool "96Boards STiH410-B2260"
+ help
+ Support for 96Board STiH410-B2260 based on STMicrolectronics
+ STiH410 soc. This board complies with 96Board Open Platform
+ Specifications. Features:
+ - 1GB DDR
+ - On-Board USB combo WiFi/Bluetooth RTL8723BU
+ with PCB soldered antenna
+ - Ethernet 1000-BaseT
+ - Sata
+ - HDMI
+ - 2 x USB2 type A
+ - micro USB2 type AB
+ - SD card slot
+ - High speed connector (SD/I2C/USB interfaces)
+ - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
+
+endchoice
+
+source "board/st/stih410-b2260/Kconfig"
+
endif
diff --git a/board/st/stih410-b2260/Kconfig b/board/st/stih410-b2260/Kconfig
new file mode 100644
index 0000000..590add0
--- /dev/null
+++ b/board/st/stih410-b2260/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STIH410_B2260
+
+config SYS_BOARD
+ string
+ default "stih410-b2260"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stih410"
+
+config SYS_CONFIG_NAME
+ string
+ default "stih410-b2260"
+
+endif
diff --git a/board/st/stih410-b2260/MAINTAINERS b/board/st/stih410-b2260/MAINTAINERS
new file mode 100644
index 0000000..4f557ac
--- /dev/null
+++ b/board/st/stih410-b2260/MAINTAINERS
@@ -0,0 +1,7 @@
+STIH410-B2260 BOARD
+M: Patrice Chotard <patrice.chotard at st.com>
+S: Maintained
+F: board/st/stih410-b2260/
+F: include/configs/stih410-b2260.h
+F: configs/stih410-b2260_defconfig
+F: arch/arm/dts/stih*
diff --git a/board/st/stih410-b2260/Makefile b/board/st/stih410-b2260/Makefile
new file mode 100644
index 0000000..68a7903
--- /dev/null
+++ b/board/st/stih410-b2260/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2017
+# Patrice Chotard, <patrice.chotard at st.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = board.o
diff --git a/board/st/stih410-b2260/board.c b/board/st/stih410-b2260/board.c
new file mode 100644
index 0000000..0c06bca
--- /dev/null
+++ b/board/st/stih410-b2260/board.c
@@ -0,0 +1,28 @@
+/*
+ * Board init file for STiH410-B2260
+ *
+ * (C) Copyright 2017 Patrice Chotard <patrice.chotard at st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+int board_init(void)
+{
+ return 0;
+}
diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig
new file mode 100644
index 0000000..4e6942f
--- /dev/null
+++ b/configs/stih410-b2260_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STI=y
+CONFIG_IDENT_STRING="STMicroelectronics STiH410-B2260"
+CONFIG_DEFAULT_DEVICE_TREE="stih410-b2260"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SYS_PROMPT="stih410-b2260 => "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_STI=y
+CONFIG_PINCTRL=y
+CONFIG_STI_ASC_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_TIMER=y
+CONFIG_SPL_OF_LIBFDT=y
diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
new file mode 100644
index 0000000..28e2f7f
--- /dev/null
+++ b/include/configs/stih410-b2260.h
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2017
+ * Patrice Chotard, <patrice.chotard at st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config.h>
+
+/* ram memory-related information */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x40000000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define PHYS_SDRAM_1_SIZE 0x3FE00000
+#define CONFIG_SYS_TEXT_BASE 0x7D600000
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */
+
+/* Libraries */
+#define CONFIG_MD5
+
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+
+/* Environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "board= B2260" \
+ "load_addr= #CONFIG_SYS_LOAD_ADDR \0"
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x4000
+
+/* Extra Commands */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SETUP_MEMORY_TAGS
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN 0x1800000
+#define CONFIG_SYS_GBL_DATA_SIZE 1024 /* Global data structures */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
+ CONFIG_SYS_MALLOC_LEN - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#endif /* __CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list