[U-Boot] [PATCH] rockchip: set scan_dev_for_boot_part env for rockchip SoC

Eddie Cai eddie.cai.linux at gmail.com
Wed Feb 22 09:05:52 UTC 2017


Hi Simon

2017-02-22 11:59 GMT+08:00 Simon Glass <sjg at chromium.org>:

> Hi Eddie,
>
> On 17 February 2017 at 00:57, Eddie Cai <eddie.cai.linux at gmail.com> wrote:
> > Auto write GPT table if fail to get GPT table when scan_dev_for_boot_part
> >
> > Signed-off-by: Eddie Cai <eddie.cai.linux at gmail.com>
> > ---
> >  arch/arm/mach-rockchip/rk3036-board.c | 20 ++++++++++++++-
> >  arch/arm/mach-rockchip/rk3288-board.c | 20 ++++++++++++++-
> >  arch/arm/mach-rockchip/rk3399-board.c | 46
> +++++++++++++++++++++++++++++++++++
> >  3 files changed, 84 insertions(+), 2 deletions(-)
> >  create mode 100644 arch/arm/mach-rockchip/rk3399-board.c
> >
> > diff --git a/arch/arm/mach-rockchip/rk3036-board.c
> b/arch/arm/mach-rockchip/rk3036-board.c
> > index bf2b268..e9aeaff 100644
> > --- a/arch/arm/mach-rockchip/rk3036-board.c
> > +++ b/arch/arm/mach-rockchip/rk3036-board.c
> > @@ -51,7 +51,25 @@ __weak int rk_board_late_init(void)
> >  int board_late_init(void)
> >  {
> >         setup_boot_mode();
> > -
> > +       setenv("scan_dev_for_boot_part",
> > +                       "part list ${devtype} ${devnum} -bootable test; "
> > +                       "if env exists test; then "
> > +                              "echo Found valid partition table; "
> > +                       "else "
> > +                      "echo No valid partition table, write the
> original partition table; "
> > +                              "gpt write ${devtype} ${devnum}
> ${partitions}; "
> > +                              "mmc rescan;"
> > +                       "fi;"
> > +                       "part list ${devtype} ${devnum} -bootable
> devplist; "
> > +                       "env exists devplist || setenv devplist 1; "
> > +                       "for distro_bootpart in ${devplist}; do "
> > +                           "if fstype ${devtype} "
> > +                                   "${devnum}:${distro_bootpart} "
> > +                                   "bootfstype; then "
> > +                               "run scan_dev_for_boot; "
> > +                             "fi; "
> > +                       "done\0"
> > +       );
> >         return rk_board_late_init();
> >  }
> >
> > diff --git a/arch/arm/mach-rockchip/rk3288-board.c
> b/arch/arm/mach-rockchip/rk3288-board.c
> > index 9894a25..386b155 100644
> > --- a/arch/arm/mach-rockchip/rk3288-board.c
> > +++ b/arch/arm/mach-rockchip/rk3288-board.c
> > @@ -74,7 +74,25 @@ int board_late_init(void)
> >  {
> >         setup_boot_mode();
> >         rk3288_qos_init();
> > -
> > +       setenv("scan_dev_for_boot_part",
> > +                       "part list ${devtype} ${devnum} -bootable test; "
> > +                       "if env exists test; then "
> > +                              "echo Found valid partition table; "
> > +                       "else "
> > +                      "echo No valid partition table, write the
> original partition table; "
> > +                              "gpt write ${devtype} ${devnum}
> ${partitions}; "
> > +                              "mmc rescan;"
> > +                       "fi;"
> > +                       "part list ${devtype} ${devnum} -bootable
> devplist; "
> > +                       "env exists devplist || setenv devplist 1; "
> > +                       "for distro_bootpart in ${devplist}; do "
> > +                           "if fstype ${devtype} "
> > +                                   "${devnum}:${distro_bootpart} "
> > +                                   "bootfstype; then "
> > +                               "run scan_dev_for_boot; "
> > +                             "fi; "
> > +                       "done\0"
> > +       );
> >         return rk_board_late_init();
> >  }
> >
> > diff --git a/arch/arm/mach-rockchip/rk3399-board.c
> b/arch/arm/mach-rockchip/rk3399-board.c
> > new file mode 100644
> > index 0000000..3777643
> > --- /dev/null
> > +++ b/arch/arm/mach-rockchip/rk3399-board.c
> > @@ -0,0 +1,46 @@
> > +/*
> > + * (C) Copyright 2017 ockchip Electronics Co., Ltd
> > + *
> > + * SPDX-License-Identifier:     GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <clk.h>
> > +#include <dm.h>
> > +#include <ram.h>
> > +#include <syscon.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/clock.h>
> > +#include <asm/arch/periph.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +__weak int rk_board_late_init(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +int board_late_init(void)
> > +{
> > +       setenv("scan_dev_for_boot_part",
> > +                       "part list ${devtype} ${devnum} -bootable test; "
> > +                       "if env exists test; then "
> > +                              "echo Found valid partition table; "
> > +                       "else "
> > +                      "echo No valid partition table, write the
> original partition table; "
> > +                              "gpt write ${devtype} ${devnum}
> ${partitions}; "
> > +                              "mmc rescan;"
> > +                       "fi;"
> > +                       "part list ${devtype} ${devnum} -bootable
> devplist; "
> > +                       "env exists devplist || setenv devplist 1; "
> > +                       "for distro_bootpart in ${devplist}; do "
> > +                           "if fstype ${devtype} "
> > +                                   "${devnum}:${distro_bootpart} "
> > +                                   "bootfstype; then "
> > +                               "run scan_dev_for_boot; "
> > +                             "fi; "
> > +                       "done\0"
>
> What is the purpose of this setenv()?
>
Auto write GPT table when scan_dev_for_boot_part fail to find a valid one

>
> > +       );
> > +       return rk_board_late_init();
> > +}
> > +
> > --
> > 2.7.4
> >
>
> Regards,
> Simon
>


More information about the U-Boot mailing list