[U-Boot] [PATCH 2/2] mtd: nand: atmel: change another functions to set/get gpio value

Wenyou Yang wenyou.yang at atmel.com
Wed Feb 22 10:07:18 UTC 2017


Because there is no implementation of gpio_set/get_value() function
after the at91 gpio driver is converted to support DM, use
at91_set/get_gpio_value().

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

 drivers/mtd/nand/atmel_nand.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 8669432deb..21d5d0e70d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1222,7 +1222,8 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
 
 #ifdef CONFIG_SYS_NAND_ENABLE_PIN
-		gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
+		at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
+				    !(ctrl & NAND_NCE));
 #endif
 		this->IO_ADDR_W = (void *) IO_ADDR_W;
 	}
@@ -1234,7 +1235,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
 #ifdef CONFIG_SYS_NAND_READY_PIN
 static int at91_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
+	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
 }
 #endif
 
-- 
2.11.0



More information about the U-Boot mailing list