[U-Boot] [PATCH V3 19/19] imx: mx7ulp_evk: enable mmc/regulator support

[Peng Fan]

Enable MMC support.
The fsl sdhc driver needs regulator to enable power, so enable
regulator support.

And bootcmd and more env.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
V3:
 None
V2:
 Add bootcmd and more env.

 configs/mx7ulp_evk_defconfig        |  8 ++++
 configs/mx7ulp_evk_plugin_defconfig |  8 ++++
 include/configs/mx7ulp_evk.h        | 91 ++++++++++++++++++++++++++++++++++++-
 3 files changed, 106 insertions(+), 1 deletion(-)

diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index 8c7446b..ea2a0cf 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -15,3 +15,11 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7ULP=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_CMD_MMC=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+# CONFIG_BLK is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_CMD_GPIO=y
diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig
index 87a9324..d4c36d9 100644
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@@ -16,3 +16,11 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7ULP=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_CMD_MMC=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+# CONFIG_BLK is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_CMD_GPIO=y
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index 2604232..f6e4b3b 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -28,7 +28,21 @@
 #define IRAM_BASE_ADDR			OCRAM_0_BASE
 #define IOMUXC_BASE_ADDR		IOMUXC1_RBASE
 
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
+#define CONFIG_SYS_FSL_USDHC_NUM        1
+
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define CONFIG_SYS_MMC_ENV_DEV          0	/* USDHC1 */
+#define CONFIG_SYS_MMC_ENV_PART         0	/* user area */
+#define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART    1
+
+#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
+#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE			SZ_8K
 
 #define CONFIG_CMD_FAT
@@ -91,6 +105,81 @@
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_END      0x9E000000
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttyLP0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx7ulp-evk.dtb\0" \
+	"fdt_addr=0x63000000\0" \
+	"boot_fdt=try\0" \
+	"earlycon=lpuart32,0x402D0010\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+		"ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"usb start; "\
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "fi"
+
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-- 
2.6.2