[U-Boot] [PATCH v2] net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable

[Philipp Tomsich]

This changeset moves two configuration options into Kconfig:
 * PHY_GIGE, indicates that a controller (with an appropriate PHY) is
   Gigabit capable and enables extra support in the miiutil for
   parsing the status of Gigabit PHYs
 * individual configuration options for MICREL_KSZ9021 and
   MICREL_KSZ9031 GbE PHYs, which previously had to enabled through
   a board-specific config file

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---
 drivers/net/Kconfig     |  7 +++++++
 drivers/net/phy/Kconfig | 10 ++++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 078d5a8..845df09 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -22,6 +22,12 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config PHY_GIGE
+        bool
+	help
+	  Enables support for parsing the status output and
+	  configuring GbE PHYs (e.g. via miiphyutil.c)
+
 config AG7XXX
 	bool "Atheros AG7xxx Ethernet MAC support"
 	depends on DM_ETH && ARCH_ATH79
@@ -165,6 +171,7 @@ config SUN8I_EMAC
         bool "Allwinner Sun8i Ethernet MAC support"
         depends on DM_ETH
         select PHYLIB
+	select PHY_GIGE
         help
           This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
 	  It can be found in H3/A64/A83T based SoCs and compatible with both
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1d514e9..0941383 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -45,6 +45,16 @@ config PHY_MARVELL
 config PHY_MICREL
 	bool "Micrel Ethernet PHYs support"
 
+if PHY_MICREL
+
+config PHY_MICREL_KSZ9021
+        bool "Micrel KSZ9021 family support"
+
+config PHY_MICREL_KSZ9031
+        bool "Micrel KSZ9031 family support"
+
+endif # PHY_MICREL
+
 config PHY_MSCC
 	bool "Microsemi Corp Ethernet PHYs support"
 
-- 
1.9.1