[U-Boot] [PATCH] ARM: ti: Update layout for MMC and eMMC (env and dfu)

Jean-Jacques Hiblot jjhiblot at ti.com
Thu Feb 23 15:14:38 UTC 2017



On 23/02/2017 14:46, Sam Protsenko wrote:
> On Wed, Feb 22, 2017 at 10:27 AM, Jean-Jacques Hiblot <jjhiblot at ti.com> wrote:
>> The problems with the current DFU layout are:
>> MMC: The space allocated for u-boot is too small for the latest u-boot
>>       (>750KB). We need to increase it. eMMC uses a much bigger area (2MB).
>> eMMC: region "u-boot.img.raw" overlaps the environment area and the region
>>        "spl-os-image.raw".
>> both: region "spl-os-image.raw" is quite small and can't handle android
>>        kernels
>>
>> Fixing this requires growing some regions and moving others.
>> Care has been taken to leave some room for further growth of
>> "spl-os-args.raw".
>> Also the "env" now appears in the dfu so that it's apparent that the
>> region is not free space that can be used to grow "u-boot.img.raw".
>> The total space allocated for those raw binaries is 16MB, of which 13+MB
>> are reserved for the kernel image.
>>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
>> ---
>>
>> Sam,
>>
>> This patch goes a bit further in changing the layout of the MMC than yours. However
>> it doesn't update the GPT partitioning. This would still be needed.
>>
> Hi Jean-Jacques,
>
> Got a couple of questions about this change and my patch (changing
> eMMC partitions table), about how to make them play nice together.
>
> 1. How DFU table is connected to eMMC partition table? And why my
> patch was interfering with DFU table?
AFAIK DFU is not related to GPT. I never used the GPT so I can't for 
sure how it fits together.
My guess is that env_mmc.c has no idea that GPT even exists and uses raw 
access to the eMMC. In this case CONFIG_ENV_OFFSET must be defined to 
point at the beginning of your env partition and must be adapted when 
the GPT is updated. The same goes for the DFU. Ideally GPT and DFU 
should use the same layout (at least for MLO, u-boot, kernel and args).

> 2. Can I change CONFIG_ENV_OFFSET? Because my changes is going to move
> "reserved" partition on eMMC, where U-Boot environment is stored. Or
> it should be in sync with DFU table somehow? If yes -- we should work
> together to find solution that works best for both cases.
CONFIG_ENV_OFFSET is loosely related to DFU: we don't update the 
environment through DFU. However we must make sure that the area used to 
store the env doesn't overlap a another region (MLO, u-boot, kernel, 
args). The dfu doesn't define those regions, it's done with #defines 
like CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. But DFU exposes them for 
"remote" upgrade.

> 3. What about my similar patch for AM57x EVM (see [1])? Is it fine, or
> it affects DFU table as well?
I guess it's OK because the env is stored in a FAT partition: 
CONFIG_ENV_OFFSET is not used

>
> Thanks.
>
> [1] https://patchwork.ozlabs.org/patch/730736/
>
>> tested on DRA7. DFU updates ok for MMC and eMMC
>>
>> Jean-Jacques
>>
>>   include/configs/dra7xx_evm.h      |  2 +-
>>   include/configs/omap5_uevm.h      |  2 +-
>>   include/configs/ti_armv7_common.h |  7 ++++---
>>   include/environment/ti/dfu.h      | 14 ++++++++------
>>   4 files changed, 14 insertions(+), 11 deletions(-)
>>
>> diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
>> index bce2816..a56c224 100644
>> --- a/include/configs/dra7xx_evm.h
>> +++ b/include/configs/dra7xx_evm.h
>> @@ -28,7 +28,7 @@
>>   #define CONFIG_ENV_IS_IN_MMC
>>   #define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
>>   #define CONFIG_ENV_SIZE                        (128 << 10)
>> -#define CONFIG_ENV_OFFSET              0xE0000
>> +#define CONFIG_ENV_OFFSET              0x220000
>>   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
>>   #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
>>   #endif
>> diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
>> index 736d804..127776e 100644
>> --- a/include/configs/omap5_uevm.h
>> +++ b/include/configs/omap5_uevm.h
>> @@ -38,7 +38,7 @@
>>   #define CONFIG_ENV_IS_IN_MMC
>>   #define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
>>   #define CONFIG_ENV_SIZE                        (128 << 10)
>> -#define CONFIG_ENV_OFFSET              0xE0000
>> +#define CONFIG_ENV_OFFSET              0x220000
>>   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
>>   #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
>>
>> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
>> index 905e1ef..4cfa134 100644
>> --- a/include/configs/ti_armv7_common.h
>> +++ b/include/configs/ti_armv7_common.h
>> @@ -282,9 +282,10 @@
>>   #define CONFIG_SPL_FS_LOAD_ARGS_NAME           "args"
>>
>>   /* RAW SD card / eMMC */
>> -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x900   /* address 0x120000 */
>> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x80    /* address 0x10000 */
>> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1500  /* address 0x2A0000 */
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x1300  /* address 0x260000 */
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x100   /* 128KiB */
>> +
>>
>>   /* spl export command */
>>   #define CONFIG_CMD_SPL
>> diff --git a/include/environment/ti/dfu.h b/include/environment/ti/dfu.h
>> index caf71a3..63e0ab8 100644
>> --- a/include/environment/ti/dfu.h
>> +++ b/include/environment/ti/dfu.h
>> @@ -12,9 +12,10 @@
>>          "rootfs part 0 2;" \
>>          "MLO fat 0 1;" \
>>          "MLO.raw raw 0x100 0x100;" \
>> -       "u-boot.img.raw raw 0x300 0x400;" \
>> -       "spl-os-args.raw raw 0x80 0x80;" \
>> -       "spl-os-image.raw raw 0x900 0x2000;" \
>> +       "u-boot.img.raw raw 0x300 0xE00;" \
>> +       "u-env.raw raw 0x1100 0x200;" \
>> +       "spl-os-args.raw raw 0x1300 0x100;" \
>> +       "spl-os-image.raw raw 0x1500 0x6B00;" \
>>          "spl-os-args fat 0 1;" \
>>          "spl-os-image fat 0 1;" \
>>          "u-boot.img fat 0 1;" \
>> @@ -27,9 +28,10 @@
>>          "rootfs part 1 2;" \
>>          "MLO fat 1 1;" \
>>          "MLO.raw raw 0x100 0x100;" \
>> -       "u-boot.img.raw raw 0x300 0x1000;" \
>> -       "spl-os-args.raw raw 0x80 0x80;" \
>> -       "spl-os-image.raw raw 0x900 0x2000;" \
>> +       "u-boot.img.raw raw 0x300 0xE00;" \
>> +       "u-env.raw raw 0x1100 0x200;" \
>> +       "spl-os-args.raw raw 0x1300 0x100;" \
>> +       "spl-os-image.raw raw 0x1500 0x6B00;" \
>>          "spl-os-args fat 1 1;" \
>>          "spl-os-image fat 1 1;" \
>>          "u-boot.img fat 1 1;" \
>> --
>> 1.9.1
>>



More information about the U-Boot mailing list