[U-Boot] [PATCH 4/9] arm: mach-omap2: Add secure image name common to OMAP and keystone

[Andrew F. Davis]

As K2 can directly boot U-Boot, add u-boot_HS_MLO as the secure image
name for secure K2 devices, for all boot modes other than SPI flash.

Signed-off-by: Madan Srinivas <madans at ti.com>
Signed-off-by: Andrew F. Davis <afd at ti.com>
---
 arch/arm/mach-omap2/config_secure.mk | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk
index 0c843338d7..0346cb93ab 100644
--- a/arch/arm/mach-omap2/config_secure.mk
+++ b/arch/arm/mach-omap2/config_secure.mk
@@ -77,6 +77,12 @@ u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin FORCE
 u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkomapsecimg)
 
+# For supporting single stage boot on keystone, the image is a full u-boot
+# file, not an SPL. This will work for all boot devices, other than SPI
+# flash
+u-boot_HS_MLO: $(obj)/u-boot.bin
+	$(call if_changed,mkomapsecimg)
+
 # For supporting single stage XiP QSPI on AM43xx, the image is a full u-boot
 # file, not an SPL. In this case the mkomapsecimg command looks for a
 # u-boot-HS_* prefix
-- 
2.11.0