[U-Boot] [PATCH] ARM: ti: Update layout for MMC and eMMC (env and dfu)
Sam Protsenko
semen.protsenko at linaro.org
Fri Feb 24 12:59:06 UTC 2017
On Fri, Feb 24, 2017 at 10:53 AM, Jean-Jacques Hiblot <jjhiblot at ti.com> wrote:
>
>
> On 23/02/2017 20:28, Sam Protsenko wrote:
>>
>> On Thu, Feb 23, 2017 at 5:14 PM, Jean-Jacques Hiblot <jjhiblot at ti.com>
>> wrote:
>>>
>>>
>>> On 23/02/2017 14:46, Sam Protsenko wrote:
>>>>
>>>> On Wed, Feb 22, 2017 at 10:27 AM, Jean-Jacques Hiblot <jjhiblot at ti.com>
>>>> wrote:
>>>>>
>>>>> The problems with the current DFU layout are:
>>>>> MMC: The space allocated for u-boot is too small for the latest u-boot
>>>>> (>750KB). We need to increase it. eMMC uses a much bigger area
>>>>> (2MB).
>>>>> eMMC: region "u-boot.img.raw" overlaps the environment area and the
>>>>> region
>>>>> "spl-os-image.raw".
>>>>> both: region "spl-os-image.raw" is quite small and can't handle android
>>>>> kernels
>>>>>
>>>>> Fixing this requires growing some regions and moving others.
>>>>> Care has been taken to leave some room for further growth of
>>>>> "spl-os-args.raw".
>>>>> Also the "env" now appears in the dfu so that it's apparent that the
>>>>> region is not free space that can be used to grow "u-boot.img.raw".
>>>>> The total space allocated for those raw binaries is 16MB, of which
>>>>> 13+MB
>>>>> are reserved for the kernel image.
>>>>>
>>>>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
>>>>> ---
>>>>>
>>>>> Sam,
>>>>>
>>>>> This patch goes a bit further in changing the layout of the MMC than
>>>>> yours. However
>>>>> it doesn't update the GPT partitioning. This would still be needed.
>>>>>
>>>> Hi Jean-Jacques,
>>>>
>>>> Got a couple of questions about this change and my patch (changing
>>>> eMMC partitions table), about how to make them play nice together.
>>>>
>>>> 1. How DFU table is connected to eMMC partition table? And why my
>>>> patch was interfering with DFU table?
>>>
>>> AFAIK DFU is not related to GPT. I never used the GPT so I can't for sure
>>> how it fits together.
>>> My guess is that env_mmc.c has no idea that GPT even exists and uses raw
>>> access to the eMMC. In this case CONFIG_ENV_OFFSET must be defined to
>>> point
>>> at the beginning of your env partition and must be adapted when the GPT
>>> is
>>> updated. The same goes for the DFU. Ideally GPT and DFU should use the
>>> same
>>> layout (at least for MLO, u-boot, kernel and args).
>>>
>>>> 2. Can I change CONFIG_ENV_OFFSET? Because my changes is going to move
>>>> "reserved" partition on eMMC, where U-Boot environment is stored. Or
>>>> it should be in sync with DFU table somehow? If yes -- we should work
>>>> together to find solution that works best for both cases.
>>>
>>> CONFIG_ENV_OFFSET is loosely related to DFU: we don't update the
>>> environment
>>> through DFU. However we must make sure that the area used to store the
>>> env
>>> doesn't overlap a another region (MLO, u-boot, kernel, args). The dfu
>>> doesn't define those regions, it's done with #defines like
>>> CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. But DFU exposes them for
>>> "remote"
>>> upgrade.
>>>
>> So if I change eMMC GPT partition table, it's ok for me to update
>> CONFIG_ENV_OFFSET as well, right?
>
> Yes you need to change it
>>
>> Because in my case CONFIG_ENV_OFFSET
>> is going to be different from the value your patch sets. In case of
>> eMMC table, we're using "reserved" partition to store U-Boot
>> environment, and I want it to be at 1664 KiB, which gives us
>> CONFIG_ENV_OFFSET=0x1A0000. Is it ok if I change it to that value? Or
>> something else must be changed along with it? If yes, then what
>> exactly?
>
> You need to adapt DFU if you plan to use it. Maybe you can define a new
> layout for DFU, something like dfu_alt_info_emmc_gpt that will reflect your
> GPT layout
>
> Anyway IMO it would be good to use the same offset/size for GPT and non-GPT
> case for the following regions:
> - MLO
> - u-boot
> - env
>
> For MLO we already use the same: offset 128kB / size 256kB
> For u-boot, you increased the size to 1MB, I suggest that we increase it a
> bit more (1.5MB or 2MB) just to make sure that we don't have to increase its
> size again next year.
> For the env, I suggest that the size is increased to 256kB to take care of
> redundant env.
>
Thank you for detailed explanation. I'm gonna get back to that task in
a few weeks, don't have enough time right now. Once I come up with
some particular patch, I will add you to reviewers, to be sure that
DFU part is correct.
>
>
>>
>> Thanks.
>>
>>>> 3. What about my similar patch for AM57x EVM (see [1])? Is it fine, or
>>>> it affects DFU table as well?
>>>
>>> I guess it's OK because the env is stored in a FAT partition:
>>> CONFIG_ENV_OFFSET is not used
>>>
>>>
>>>> Thanks.
>>>>
>>>> [1] https://patchwork.ozlabs.org/patch/730736/
>>>>
>>>>> tested on DRA7. DFU updates ok for MMC and eMMC
>>>>>
>>>>> Jean-Jacques
>>>>>
>>>>> include/configs/dra7xx_evm.h | 2 +-
>>>>> include/configs/omap5_uevm.h | 2 +-
>>>>> include/configs/ti_armv7_common.h | 7 ++++---
>>>>> include/environment/ti/dfu.h | 14 ++++++++------
>>>>> 4 files changed, 14 insertions(+), 11 deletions(-)
>>>>>
>>>>> diff --git a/include/configs/dra7xx_evm.h
>>>>> b/include/configs/dra7xx_evm.h
>>>>> index bce2816..a56c224 100644
>>>>> --- a/include/configs/dra7xx_evm.h
>>>>> +++ b/include/configs/dra7xx_evm.h
>>>>> @@ -28,7 +28,7 @@
>>>>> #define CONFIG_ENV_IS_IN_MMC
>>>>> #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
>>>>> #define CONFIG_ENV_SIZE (128 << 10)
>>>>> -#define CONFIG_ENV_OFFSET 0xE0000
>>>>> +#define CONFIG_ENV_OFFSET 0x220000
>>>>> #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET +
>>>>> CONFIG_ENV_SIZE)
>>>>> #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
>>>>> #endif
>>>>> diff --git a/include/configs/omap5_uevm.h
>>>>> b/include/configs/omap5_uevm.h
>>>>> index 736d804..127776e 100644
>>>>> --- a/include/configs/omap5_uevm.h
>>>>> +++ b/include/configs/omap5_uevm.h
>>>>> @@ -38,7 +38,7 @@
>>>>> #define CONFIG_ENV_IS_IN_MMC
>>>>> #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
>>>>> #define CONFIG_ENV_SIZE (128 << 10)
>>>>> -#define CONFIG_ENV_OFFSET 0xE0000
>>>>> +#define CONFIG_ENV_OFFSET 0x220000
>>>>> #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET +
>>>>> CONFIG_ENV_SIZE)
>>>>> #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
>>>>>
>>>>> diff --git a/include/configs/ti_armv7_common.h
>>>>> b/include/configs/ti_armv7_common.h
>>>>> index 905e1ef..4cfa134 100644
>>>>> --- a/include/configs/ti_armv7_common.h
>>>>> +++ b/include/configs/ti_armv7_common.h
>>>>> @@ -282,9 +282,10 @@
>>>>> #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
>>>>>
>>>>> /* RAW SD card / eMMC */
>>>>> -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /*
>>>>> address 0x120000 */
>>>>> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address
>>>>> 0x10000 */
>>>>> -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
>>>>> +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1500 /*
>>>>> address 0x2A0000 */
>>>>> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x1300 /* address
>>>>> 0x260000 */
>>>>> +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x100 /* 128KiB */
>>>>> +
>>>>>
>>>>> /* spl export command */
>>>>> #define CONFIG_CMD_SPL
>>>>> diff --git a/include/environment/ti/dfu.h
>>>>> b/include/environment/ti/dfu.h
>>>>> index caf71a3..63e0ab8 100644
>>>>> --- a/include/environment/ti/dfu.h
>>>>> +++ b/include/environment/ti/dfu.h
>>>>> @@ -12,9 +12,10 @@
>>>>> "rootfs part 0 2;" \
>>>>> "MLO fat 0 1;" \
>>>>> "MLO.raw raw 0x100 0x100;" \
>>>>> - "u-boot.img.raw raw 0x300 0x400;" \
>>>>> - "spl-os-args.raw raw 0x80 0x80;" \
>>>>> - "spl-os-image.raw raw 0x900 0x2000;" \
>>>>> + "u-boot.img.raw raw 0x300 0xE00;" \
>>>>> + "u-env.raw raw 0x1100 0x200;" \
>>>>> + "spl-os-args.raw raw 0x1300 0x100;" \
>>>>> + "spl-os-image.raw raw 0x1500 0x6B00;" \
>>>>> "spl-os-args fat 0 1;" \
>>>>> "spl-os-image fat 0 1;" \
>>>>> "u-boot.img fat 0 1;" \
>>>>> @@ -27,9 +28,10 @@
>>>>> "rootfs part 1 2;" \
>>>>> "MLO fat 1 1;" \
>>>>> "MLO.raw raw 0x100 0x100;" \
>>>>> - "u-boot.img.raw raw 0x300 0x1000;" \
>>>>> - "spl-os-args.raw raw 0x80 0x80;" \
>>>>> - "spl-os-image.raw raw 0x900 0x2000;" \
>>>>> + "u-boot.img.raw raw 0x300 0xE00;" \
>>>>> + "u-env.raw raw 0x1100 0x200;" \
>>>>> + "spl-os-args.raw raw 0x1300 0x100;" \
>>>>> + "spl-os-image.raw raw 0x1500 0x6B00;" \
>>>>> "spl-os-args fat 1 1;" \
>>>>> "spl-os-image fat 1 1;" \
>>>>> "u-boot.img fat 1 1;" \
>>>>> --
>>>>> 1.9.1
>>>>>
>
More information about the U-Boot
mailing list