[U-Boot] [PATCH v2 1/3 RESEND] ARM: dts: sun9i: Add mmc1 pinmux setting
Rask Ingemann Lambertsen
rask at formelder.dk
Sat Feb 25 13:19:54 UTC 2017
From: Chen-Yu Tsai <wens at csie.org>
commit 56b0730157f70dc23d6caff9e7ceb8b377b96b9f upstream.
On the A80, mmc1 is available on pingroup G. Designs mostly use this
to connect to an SDIO WiFi chip.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Rask Ingemann Lambertsen <rask at formelder.dk>
---
Changes from v1 to v2:
- Corrected mail sender and added my Signed-off-by: to commit message.
arch/arm/dts/sun9i-a80.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
index f68b324..92412b2 100644
--- a/arch/arm/dts/sun9i-a80.dtsi
+++ b/arch/arm/dts/sun9i-a80.dtsi
@@ -701,6 +701,14 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc1_pins: mmc1 {
+ allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc2_8bit_pins: mmc2_8bit {
allwinner,pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
--
2.10.2
More information about the U-Boot
mailing list