[U-Boot] [PATCH v4 00/15] i.MX6: Engicam i.CoreM6/Is.IoT eMMC boot support

[Stefano Babic]

On 24/02/2017 11:15, Jagan Teki wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
> 
> Changes for v3:
> - Rebase on master
> - Fix checkpatch.pl Warnings
> - Add IMX6_BMODE_UART macro for uart bootmode
> - Remove value assignment in enum, since all enum list is order
> 
> Changes for v3:
> - Update IMX6_BMODE_* shift macros with real number instead of bitops
> - %s/IMX6_BMODE_SERIAL/IMX6_BMODE_SERIAL_ROM
> - Assign enums with numbers so-that it can easy to see same in RM
> - Update board MAINTAINERS file with imx6ul-isiot-emmc.dts file
> 
> Changes for v2:
> - Rebase on master
> - Add Is.IoT eMMC boot patches
> - Add few mmc env patches on board
> 
> Jagan Teki (15):
>   imx6: Add imx6_src_get_boot_mode
>   imx: spl: Update NAND bootmode detection bit
>   imx: Use IMX6_BMODE_* macros instead of numericals
>   imx6: Add src_base structure define macro
>   imx6: isiotmx6ul: Update SPL board boot order for eMMC
>   i.MX6UL: isiot: Add eMMC boot support
>   i.MX6UL: isiot: Add modeboot env via board_late_init
>   i.MX6UL: isiot: Add mmc_late_init
>   i.MX6UL: isiot: Switch the mmc env based on devno
>   arm: dts: imx6qdl-icore-rqs: Add eMMC node
>   imx6: icorem6_rqs: Update SPL board boot order for eMMC
>   imx6: icorem6_rqs: Add eMMC boot support
>   i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
>   i.MX6Q: icorem6_rqs: Add mmc_late_init
>   i.MX6Q: isiot: Switch the mmc env based on devno
> 
>  arch/arm/dts/Makefile                       |   1 +
>  arch/arm/dts/imx6qdl-icore-rqs.dtsi         |  22 ++++++
>  arch/arm/dts/imx6ul-isiot-emmc.dts          |  77 +++++++++++++++++++++
>  arch/arm/imx-common/init.c                  |  10 +++
>  arch/arm/imx-common/spl.c                   |  49 ++++++++------
>  arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
>  arch/arm/include/asm/imx-common/sys_proto.h |  47 +++++++++++++
>  board/engicam/icorem6_rqs/icorem6_rqs.c     |  96 +++++++++++++++++++++++++-
>  board/engicam/isiotmx6ul/MAINTAINERS        |   2 +
>  board/engicam/isiotmx6ul/isiotmx6ul.c       | 101 +++++++++++++++++++++++++++-
>  configs/imx6dl_icore_rqs_mmc_defconfig      |   1 +
>  configs/imx6q_icore_rqs_mmc_defconfig       |   1 +
>  configs/imx6ul_isiot_emmc_defconfig         |  40 +++++++++++
>  configs/imx6ul_isiot_mmc_defconfig          |   1 +
>  configs/imx6ul_isiot_nand_defconfig         |   1 +
>  include/configs/imx6qdl_icore_rqs.h         |  36 +++++-----
>  include/configs/imx6ul_isiot.h              |  40 +++++------
>  17 files changed, 462 insertions(+), 65 deletions(-)
>  create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts
>  create mode 100644 configs/imx6ul_isiot_emmc_defconfig
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================