[U-Boot] [PATCH v6 00/10] imx6ul: Add Engicam Is.IoT MX6UL support

Stefano Babic sbabic at denx.de
Sun Feb 26 11:54:32 UTC 2017


On 24/02/2017 11:02, Jagan Teki wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
> 
> This patch set support Engicam Is.IoT MX6UL board support.
> 
> Changes for v6:
> - Remove 'arm: dts: Add MAINTAINERS file' patch
> - Rebase to master
> 
> Changes for v5:
> - Update ccgr_init so-that it can enable required clocks
> - Add new patch for dts files include under board MAINTAINERS
> - Add new patch for arch/arm/dts/MAINTAINERS file
> - Update 'Reviewed-by: Stefano Babic <sbabic at denx.de>' tag
> 
> Changes for v4:
> - Rebase to master
> 
> Changes for v3:
> - Rebase to master
> 
> Changes for v2:
> - Skiped eMMC node patch
> - Rebase to master
> 
> Jagan Teki (10):
>   configs: imx6: Don't define USDHC2_BASE_ADDR
>   arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
>   arm: dts: imx6ul-isiot: Add I2C nodes
>   imx6: isiotmx6ul: Add I2C support
>   arm: dts: imx6ul-isiot: Add FEC node
>   imx6: isiotmx6ul: Add FEC support
>   imx6: isiotmx6ul: Add NAND support
>   imx6: isiotmx6ul: Add nandboot env support
>   imx6ul: isiotmx6ul: Enable I2C support
>   i.MX6: engicam: Include dts files under MAINTAINERS
> 
>  arch/arm/cpu/armv7/mx6/Kconfig        |  12 ++
>  arch/arm/dts/Makefile                 |   4 +-
>  arch/arm/dts/imx6ul-isiot-mmc.dts     |  50 ++++++
>  arch/arm/dts/imx6ul-isiot-nand.dts    |  50 ++++++
>  arch/arm/dts/imx6ul-isiot.dtsi        | 142 +++++++++++++++
>  board/engicam/geam6ul/MAINTAINERS     |   1 +
>  board/engicam/icorem6/MAINTAINERS     |   3 +
>  board/engicam/icorem6_rqs/MAINTAINERS |   3 +
>  board/engicam/isiotmx6ul/Kconfig      |  12 ++
>  board/engicam/isiotmx6ul/MAINTAINERS  |  10 ++
>  board/engicam/isiotmx6ul/Makefile     |   6 +
>  board/engicam/isiotmx6ul/README       |  28 +++
>  board/engicam/isiotmx6ul/isiotmx6ul.c | 315 ++++++++++++++++++++++++++++++++++
>  configs/imx6ul_isiot_mmc_defconfig    |  41 +++++
>  configs/imx6ul_isiot_nand_defconfig   |  42 +++++
>  include/configs/imx6qdl_icore.h       |   2 +-
>  include/configs/imx6ul_geam.h         |   2 +-
>  include/configs/imx6ul_isiot.h        | 205 ++++++++++++++++++++++
>  18 files changed, 925 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts
>  create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts
>  create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi
>  create mode 100644 board/engicam/isiotmx6ul/Kconfig
>  create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS
>  create mode 100644 board/engicam/isiotmx6ul/Makefile
>  create mode 100644 board/engicam/isiotmx6ul/README
>  create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
>  create mode 100644 configs/imx6ul_isiot_mmc_defconfig
>  create mode 100644 configs/imx6ul_isiot_nand_defconfig
>  create mode 100644 include/configs/imx6ul_isiot.h
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list