[U-Boot] [PATCH 1/3] ARM: dts: at91: add dts files for at91sam9263ek

Wenyou Yang wenyou.yang at atmel.com
Mon Feb 27 05:22:12 UTC 2017


The device tree source files of at91sam9263ek boards are copied
from the Linux v4.10, do the changes as below.
 - Add the reg property for the pinctrl node.
 - Move the gpio (pioA, pioB, pioC, pioD, pioE) nodes as the pinctrl's
   slibling nodes, instead of the child nodes.
 - Fix the compilation warnings.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

 arch/arm/dts/Makefile          |   2 +
 arch/arm/dts/at91sam9263.dtsi  | 185 +++++++++++++++++----------------
 arch/arm/dts/at91sam9263ek.dts | 227 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 325 insertions(+), 89 deletions(-)
 create mode 100644 arch/arm/dts/at91sam9263ek.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 76dc6562ed..4511b14376 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -330,6 +330,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
 	at91sam9g20ek.dtb	\
 	at91sam9g20ek_2mmc.dtb
 
+dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
+
 dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
 	at91sam9g15ek.dtb	\
 	at91sam9g25ek.dtb	\
diff --git a/arch/arm/dts/at91sam9263.dtsi b/arch/arm/dts/at91sam9263.dtsi
index 93446420af..433d8554b2 100644
--- a/arch/arm/dts/at91sam9263.dtsi
+++ b/arch/arm/dts/at91sam9263.dtsi
@@ -114,7 +114,7 @@
 					clocks = <&main_osc>;
 				};
 
-				plla: pllack {
+				plla: pllack at 0 {
 					compatible = "atmel,at91rm9200-clk-pll";
 					#clock-cells = <0>;
 					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
@@ -126,7 +126,7 @@
 								<190000000 240000000 2 1>;
 				};
 
-				pllb: pllbck {
+				pllb: pllbck at 1 {
 					compatible = "atmel,at91rm9200-clk-pll";
 					#clock-cells = <0>;
 					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
@@ -161,25 +161,25 @@
 					interrupt-parent = <&pmc>;
 					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
 
-					prog0: prog0 {
+					prog0: prog at 0 {
 						#clock-cells = <0>;
 						reg = <0>;
 						interrupts = <AT91_PMC_PCKRDY(0)>;
 					};
 
-					prog1: prog1 {
+					prog1: prog at 1 {
 						#clock-cells = <0>;
 						reg = <1>;
 						interrupts = <AT91_PMC_PCKRDY(1)>;
 					};
 
-					prog2: prog2 {
+					prog2: prog at 2 {
 						#clock-cells = <0>;
 						reg = <2>;
 						interrupts = <AT91_PMC_PCKRDY(2)>;
 					};
 
-					prog3: prog3 {
+					prog3: prog at 3 {
 						#clock-cells = <0>;
 						reg = <3>;
 						interrupts = <AT91_PMC_PCKRDY(3)>;
@@ -191,37 +191,37 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					uhpck: uhpck {
+					uhpck: uhpck at 6 {
 						#clock-cells = <0>;
 						reg = <6>;
 						clocks = <&usb>;
 					};
 
-					udpck: udpck {
+					udpck: udpck at 7 {
 						#clock-cells = <0>;
 						reg = <7>;
 						clocks = <&usb>;
 					};
 
-					pck0: pck0 {
+					pck0: pck0 at 8 {
 						#clock-cells = <0>;
 						reg = <8>;
 						clocks = <&prog0>;
 					};
 
-					pck1: pck1 {
+					pck1: pck1 at 9 {
 						#clock-cells = <0>;
 						reg = <9>;
 						clocks = <&prog1>;
 					};
 
-					pck2: pck2 {
+					pck2: pck2 at 10 {
 						#clock-cells = <0>;
 						reg = <10>;
 						clocks = <&prog2>;
 					};
 
-					pck3: pck3 {
+					pck3: pck3 at 11 {
 						#clock-cells = <0>;
 						reg = <11>;
 						clocks = <&prog3>;
@@ -234,122 +234,122 @@
 					#size-cells = <0>;
 					clocks = <&mck>;
 
-					pioA_clk: pioA_clk {
+					pioA_clk: pioA_clk at 2 {
 						#clock-cells = <0>;
 						reg = <2>;
 					};
 
-					pioB_clk: pioB_clk {
+					pioB_clk: pioB_clk at 3 {
 						#clock-cells = <0>;
 						reg = <3>;
 					};
 
-					pioCDE_clk: pioCDE_clk {
+					pioCDE_clk: pioCDE_clk at 4 {
 						#clock-cells = <0>;
 						reg = <4>;
 					};
 
-					usart0_clk: usart0_clk {
+					usart0_clk: usart0_clk at 7 {
 						#clock-cells = <0>;
 						reg = <7>;
 					};
 
-					usart1_clk: usart1_clk {
+					usart1_clk: usart1_clk at 8 {
 						#clock-cells = <0>;
 						reg = <8>;
 					};
 
-					usart2_clk: usart2_clk {
+					usart2_clk: usart2_clk at 9 {
 						#clock-cells = <0>;
 						reg = <9>;
 					};
 
-					mci0_clk: mci0_clk {
+					mci0_clk: mci0_clk at 10 {
 						#clock-cells = <0>;
 						reg = <10>;
 					};
 
-					mci1_clk: mci1_clk {
+					mci1_clk: mci1_clk at 11 {
 						#clock-cells = <0>;
 						reg = <11>;
 					};
 
-					can_clk: can_clk {
+					can_clk: can_clk at 12 {
 						#clock-cells = <0>;
 						reg = <12>;
 					};
 
-					twi0_clk: twi0_clk {
+					twi0_clk: twi0_clk at 13 {
 						#clock-cells = <0>;
 						reg = <13>;
 					};
 
-					spi0_clk: spi0_clk {
+					spi0_clk: spi0_clk at 14 {
 						#clock-cells = <0>;
 						reg = <14>;
 					};
 
-					spi1_clk: spi1_clk {
+					spi1_clk: spi1_clk at 15 {
 						#clock-cells = <0>;
 						reg = <15>;
 					};
 
-					ssc0_clk: ssc0_clk {
+					ssc0_clk: ssc0_clk at 16 {
 						#clock-cells = <0>;
 						reg = <16>;
 					};
 
-					ssc1_clk: ssc1_clk {
+					ssc1_clk: ssc1_clk at 17 {
 						#clock-cells = <0>;
 						reg = <17>;
 					};
 
-					ac97_clk: ac97_clk {
+					ac97_clk: ac97_clk at 18 {
 						#clock-cells = <0>;
 						reg = <18>;
 					};
 
-					tcb_clk: tcb_clk {
+					tcb_clk: tcb_clk at 19 {
 						#clock-cells = <0>;
 						reg = <19>;
 					};
 
-					pwm_clk: pwm_clk {
+					pwm_clk: pwm_clk at 20 {
 						#clock-cells = <0>;
 						reg = <20>;
 					};
 
-					macb0_clk: macb0_clk {
+					macb0_clk: macb0_clk at 21 {
 						#clock-cells = <0>;
 						reg = <21>;
 					};
 
-					g2de_clk: g2de_clk {
+					g2de_clk: g2de_clk at 23 {
 						#clock-cells = <0>;
 						reg = <23>;
 					};
 
-					udc_clk: udc_clk {
+					udc_clk: udc_clk at 24 {
 						#clock-cells = <0>;
 						reg = <24>;
 					};
 
-					isi_clk: isi_clk {
+					isi_clk: isi_clk at 25 {
 						#clock-cells = <0>;
 						reg = <25>;
 					};
 
-					lcd_clk: lcd_clk {
+					lcd_clk: lcd_clk at 26 {
 						#clock-cells = <0>;
 						reg = <26>;
 					};
 
-					dma_clk: dma_clk {
+					dma_clk: dma_clk at 27 {
 						#clock-cells = <0>;
 						reg = <27>;
 					};
 
-					ohci_clk: ohci_clk {
+					ohci_clk: ohci_clk at 29 {
 						#clock-cells = <0>;
 						reg = <29>;
 					};
@@ -398,6 +398,12 @@
 				#size-cells = <1>;
 				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
+				reg = <0xfffff200 0x200
+				       0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200
+				      >;
 
 				atmel,mux-mask = <
 				      /*    A         B     */
@@ -412,8 +418,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC30 periph A */
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC31 periph with pullup */
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -707,60 +713,61 @@
 					};
 				};
 
-				pioA: gpio at fffff200 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff200 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
+			};
 
-				pioB: gpio at fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
+			pioA: gpio at fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioA_clk>;
+			};
 
-				pioC: gpio at fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
-				};
+			pioB: gpio at fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioB_clk>;
+			};
 
-				pioD: gpio at fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
-				};
+			pioC: gpio at fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
+			};
 
-				pioE: gpio at fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
-				};
+			pioD: gpio at fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
+			};
+
+			pioE: gpio at fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pioCDE_clk>;
 			};
 
 			dbgu: serial at ffffee00 {
@@ -1019,7 +1026,7 @@
 		};
 	};
 
-	i2c at 0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/dts/at91sam9263ek.dts b/arch/arm/dts/at91sam9263ek.dts
new file mode 100644
index 0000000000..127cc42e9e
--- /dev/null
+++ b/arch/arm/dts/at91sam9263ek.dts
@@ -0,0 +1,227 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial at ffffee00 {
+				status = "okay";
+			};
+
+			usart0: serial at fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet at fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget at fff78000 {
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc at fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot at 0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl at fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
+
+			spi0: spi at fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+				mtd_dataflash at 0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			watchdog at fffffd40 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb at 0x00700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand at 40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap at 0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox at 20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv at 60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2 at 80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree at 80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel at a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs at 4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data at 7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci at 00a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512 at 50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
-- 
2.11.0



More information about the U-Boot mailing list