[U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
trini at konsulko.com
Mon Feb 27 13:22:56 UTC 2017
On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3:
>
> video: mxsfb: Fix reset hang when videomode variable is not present
> (2017-02-22 21:47:59 +0100)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8:
>
> i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22
> +0100)
>
> ----------------------------------------------------------------
> Andrey Yurovsky (1):
> mtd: nand: build MXS driver for MX7 as well
>
> Jagan Teki (25):
> configs: imx6: Don't define USDHC2_BASE_ADDR
> arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
> arm: dts: imx6ul-isiot: Add I2C nodes
> imx6: isiotmx6ul: Add I2C support
> arm: dts: imx6ul-isiot: Add FEC node
> imx6: isiotmx6ul: Add FEC support
> imx6: isiotmx6ul: Add NAND support
> imx6: isiotmx6ul: Add nandboot env support
> imx6ul: isiotmx6ul: Enable I2C support
> i.MX6: engicam: Include dts files under MAINTAINERS
> imx6: Add imx6_src_get_boot_mode
> imx: spl: Update NAND bootmode detection bit
> imx: Use IMX6_BMODE_* macros instead of numericals
> imx6: Add src_base structure define macro
> imx6: isiotmx6ul: Update SPL board boot order for eMMC
> i.MX6UL: isiot: Add eMMC boot support
> i.MX6UL: isiot: Add modeboot env via board_late_init
> i.MX6UL: isiot: Add mmc_late_init
> i.MX6UL: isiot: Switch the mmc env based on devno
> arm: dts: imx6qdl-icore-rqs: Add eMMC node
> imx6: icorem6_rqs: Update SPL board boot order for eMMC
> imx6: icorem6_rqs: Add eMMC boot support
> i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init
> i.MX6Q: icorem6_rqs: Add mmc_late_init
> i.MX6Q: isiot: Switch the mmc env based on devno
>
> Markus Niebel (13):
> arm: imx6: tqma6: add configurable CMA size
> imx6: tqma6: rely on default setting for tftp and nfs
> mx6: tqma6: fix typo in env
> mx6: tqma6: add rootfsmode environment for mmc / sd
> tqma6: fix rounding in env
> tqma6: [cosmetic] sanitize environment defines
> arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings
> arm: imx6: tqma6: add support for TQMa6DL variant
> imx6: tqma6: implement power_init_board
> imx6: tqma6: use lower driver stength for I2C pins
> imx6: tqma6: disable spi CS unused in U-Boot
> imx6: tqma6: adjust ethernet phy reset delay
> mx6: tqma6: clear enet clk sel for mba6
>
> Peng Fan (16):
> imx: mx7ulp: Add mx7ulp to Kconfig
> imx: mx7ulp: add registers header file
> imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1
> imx: mx7ulp: Add clock framework and functions
> imx: mx7ulp: Add soc level initialization codes and functions
> gpio: Add Rapid GPIO2P driver for i.MX7ULP
> mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP
> pinctrl: Add i.MX7ULP pinctrl driver
> i2c: lpi2c: add lpi2c driver for i.MX7ULP
> serial: lpuart: restructure lpuart driver
> serial: lpuart: add i.MX7ULP support
> mx7ulp: Add HAB boot support
> arm: dts: add i.MX7ULP dtsi file
> mmc: fsl_esdhc: support i.MX7ULP
> imx: imx7ulp: add EVK board support
> imx: mx7ulp_evk: enable mmc/regulator support
>
> Peter Robinson (3):
> mx6sx: udoo_neo: Define the default serial console
> mx6sx: udoo_neo: use different load address for ramdisk
> mx6sx: udoo_neo: Enable distro boot options in config
>
> Stefano Babic (1):
> Merge branch 'master' of git://git.denx.de/u-boot
>
> Ye Li (3):
> imx: mx7ulp: Implement the clock functions for i2c driver
> mx7ulp: Add iomux pins header file
> wdog: Add the watchdog driver for MX7ULP.
>
> arch/arm/Kconfig | 7 +
> arch/arm/Makefile | 2 +-
> arch/arm/cpu/armv7/Makefile | 3 +-
> arch/arm/cpu/armv7/mx6/Kconfig | 12 +
> arch/arm/cpu/armv7/mx7ulp/Kconfig | 17 ++
> arch/arm/cpu/armv7/mx7ulp/Makefile | 8 +
> arch/arm/cpu/armv7/mx7ulp/clock.c | 365
> +++++++++++++++++++++++++++
> arch/arm/cpu/armv7/mx7ulp/iomux.c | 70 ++++++
> arch/arm/cpu/armv7/mx7ulp/pcc.c | 286
> +++++++++++++++++++++
> arch/arm/cpu/armv7/mx7ulp/scg.c | 1086
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/mx7ulp/soc.c | 247
> ++++++++++++++++++
> arch/arm/cpu/armv7/vf610/generic.c | 5 +
> arch/arm/dts/Makefile | 7 +-
> arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++
> arch/arm/dts/imx6ul-isiot-emmc.dts | 77 ++++++
> arch/arm/dts/imx6ul-isiot-mmc.dts | 50 ++++
> arch/arm/dts/imx6ul-isiot-nand.dts | 50 ++++
> arch/arm/dts/imx6ul-isiot.dtsi | 142 +++++++++++
> arch/arm/dts/imx7ulp-evk.dts | 426
> +++++++++++++++++++++++++++++++
> arch/arm/dts/imx7ulp-pinfunc.h | 882
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/imx7ulp-uboot.dtsi | 43 ++++
> arch/arm/dts/imx7ulp.dtsi | 598
> +++++++++++++++++++++++++++++++++++++++++++
> arch/arm/imx-common/Makefile | 4 +
> arch/arm/imx-common/hab.c | 3 +-
> arch/arm/imx-common/init.c | 10 +
> arch/arm/imx-common/spl.c | 49 ++--
> arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h | 42 ----
> arch/arm/include/asm/arch-imx/cpu.h | 2 +
> arch/arm/include/asm/arch-ls102xa/imx-regs.h | 40 ---
> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx7ulp/clock.h | 43 ++++
> arch/arm/include/asm/arch-mx7ulp/gpio.h | 22 ++
> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 1120
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h | 520
> ++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx7ulp/iomux.h | 95 +++++++
> arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h | 910
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx7ulp/pcc.h | 373
> +++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx7ulp/scg.h | 342
> +++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx7ulp/sys_proto.h | 21 ++
> arch/arm/include/asm/arch-vf610/clock.h | 1 +
> arch/arm/include/asm/arch-vf610/imx-regs.h | 28 ---
> arch/arm/include/asm/imx-common/sys_proto.h | 49 ++++
> board/engicam/geam6ul/MAINTAINERS | 1 +
> board/engicam/icorem6/MAINTAINERS | 3 +
> board/engicam/icorem6_rqs/MAINTAINERS | 3 +
> board/engicam/icorem6_rqs/icorem6_rqs.c | 96 ++++++-
> board/engicam/isiotmx6ul/Kconfig | 12 +
> board/engicam/isiotmx6ul/MAINTAINERS | 12 +
> board/engicam/isiotmx6ul/Makefile | 6 +
> board/engicam/isiotmx6ul/README | 28 +++
> board/engicam/isiotmx6ul/isiotmx6ul.c | 414
> ++++++++++++++++++++++++++++++
> board/freescale/mx7ulp_evk/Kconfig | 12 +
> board/freescale/mx7ulp_evk/MAINTAINERS | 7 +
> board/freescale/mx7ulp_evk/Makefile | 10 +
> board/freescale/mx7ulp_evk/imximage.cfg | 137 ++++++++++
> board/freescale/mx7ulp_evk/mx7ulp_evk.c | 48 ++++
> board/freescale/mx7ulp_evk/plugin.S | 224
> +++++++++++++++++
> board/tqc/tqma6/Kconfig | 7 +
> board/tqc/tqma6/README | 3 +
> board/tqc/tqma6/tqma6.c | 31 ++-
> board/tqc/tqma6/tqma6_mba6.c | 47 ++--
> board/tqc/tqma6/tqma6dl.cfg | 125 +++++++++
> configs/imx6dl_icore_rqs_mmc_defconfig | 1 +
> configs/imx6q_icore_rqs_mmc_defconfig | 1 +
> configs/imx6ul_isiot_emmc_defconfig | 40 +++
> configs/imx6ul_isiot_mmc_defconfig | 42 ++++
> configs/imx6ul_isiot_nand_defconfig | 43 ++++
> configs/mx7ulp_evk_defconfig | 25 ++
> configs/mx7ulp_evk_plugin_defconfig | 26 ++
> configs/tqma6dl_mba6_mmc_defconfig | 36 +++
> configs/tqma6dl_mba6_spi_defconfig | 37 +++
> configs/udoo_neo_defconfig | 11 +-
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/imx_rgpio2p.c | 224
> +++++++++++++++++
> drivers/i2c/Kconfig | 6 +
> drivers/i2c/Makefile | 1 +
> drivers/i2c/imx_lpi2c.c | 462
> ++++++++++++++++++++++++++++++++++
> drivers/misc/mxc_ocotp.c | 52 +++-
> drivers/mmc/fsl_esdhc.c | 8 +
> drivers/mtd/nand/Kconfig | 2 +-
> drivers/pinctrl/nxp/Kconfig | 14 ++
> drivers/pinctrl/nxp/Makefile | 1 +
> drivers/pinctrl/nxp/pinctrl-imx.c | 10 +-
> drivers/pinctrl/nxp/pinctrl-imx.h | 3 +
> drivers/pinctrl/nxp/pinctrl-imx7ulp.c | 41 +++
> drivers/serial/serial_lpuart.c | 336
> ++++++++++++++++---------
> drivers/watchdog/Kconfig | 8 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/ulp_wdog.c | 98 ++++++++
> include/configs/imx6qdl_icore.h | 2 +-
> include/configs/imx6qdl_icore_rqs.h | 36 ++-
> include/configs/imx6ul_geam.h | 2 +-
> include/configs/imx6ul_isiot.h | 199 +++++++++++++++
> include/configs/mx7ulp_evk.h | 198 +++++++++++++++
> include/configs/tqma6.h | 49 ++--
> include/configs/tqma6_mba6.h | 5 +-
> include/configs/udoo_neo.h | 3 +-
> include/dt-bindings/clock/imx7ulp-clock.h | 161 ++++++++++++
> include/fsl_lpuart.h | 72 ++++++
> 100 files changed, 11219 insertions(+), 352 deletions(-)
This is too much too close to the release window, sorry.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170227/7752ae5b/attachment.sig>
More information about the U-Boot
mailing list