[U-Boot] [PATCH v5 16/16] sunxi: Add support for the CHIP Pro
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Feb 27 17:22:15 UTC 2017
The CHIP Pro is a SoM that features the GR8 SIP, an AXP209, a BT/WiFi chip
and a 512MiB SLC NAND.
This it's an SLC NAND, it doesn't suffer the same drawbacks than found on
the MLC NANDs, and we can enable it right away.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede at redhat.com>
---
configs/CHIP_pro_defconfig | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+), 0 deletions(-)
create mode 100644 configs/CHIP_pro_defconfig
diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
new file mode 100644
index 000000000000..df43e5a12d06
--- /dev/null
+++ b/configs/CHIP_pro_defconfig
@@ -0,0 +1,33 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_SPL_MMC_SUPPORT is not set
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
+CONFIG_USB0_VBUS_PIN="PB10"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,SYS_NAND_BLOCK_SIZE=0x40000,SYS_NAND_PAGE_SIZE=4096,SYS_NAND_OOBSIZE=256"
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot-env"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)"
+# CONFIG_MMC is not set
+CONFIG_NAND_SUNXI=y
+CONFIG_AXP_ALDO3_VOLT=3300
+CONFIG_AXP_ALDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010
--
git-series 0.8.11
More information about the U-Boot
mailing list