[U-Boot] [PATCH v5 13/16] nand: sunxi: Add options for the SPL NAND configuration

Maxime Ripard maxime.ripard at free-electrons.com
Mon Feb 27 17:22:12 UTC 2017


The SPL image needs to be built with a different ECC configuration than the
U-Boot binary.

Add Kconfig options with defaults to provide a value that should work for
anyone, but is still configurable if needs be.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede at redhat.com>
Acked-by: Scott Wood <oss at buserror.net>
---
 drivers/mtd/nand/Kconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5601900e4f79..51f901025168 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,22 @@ config NAND_SUNXI
 	The SPL driver only supports reading from the NAND using DMA
 	transfers.
 
+if NAND_SUNXI
+
+config NAND_SUNXI_SPL_ECC_STRENGTH
+	int "Allwinner NAND SPL ECC Strength"
+	default 64
+
+config NAND_SUNXI_SPL_ECC_SIZE
+	int "Allwinner NAND SPL ECC Step Size"
+	default 1024
+
+config NAND_SUNXI_SPL_USABLE_PAGE_SIZE
+	int "Allwinner NAND SPL Usable Page Size"
+	default 1024
+
+endif
+
 config NAND_ARASAN
 	bool "Configure Arasan Nand"
 	help
-- 
git-series 0.8.11


More information about the U-Boot mailing list